Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Regulator Option:   without Motor
  • Operation:   Power

This replacement power window regulator without motor is just what you need to get your vehicle in good shape again!

Specifications:

  • Fits LH (Driver Side) FRONT
  • Power operation
  • Replaces dealer part number: 10334397
  • Does NOT include power window motor
  • Direct replacement
  • Built to strict quality control standards

This window regulator makes a great replacement and has good cost savings over a dealer unit.

Please Note:

This window regulator is designed to work with factory style motors only.  Due to variations in aftermarket designs, replacement motors may not have the correct gear style.

Please Note:

This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original. It has been subjected to extensive testing and quality control standards. That is why we offer this regulator with our superior warranty!

Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (1:12)
    • Pry up the window switch panel by hand
    • Disconnect the window switch wiring harnesses
    • Pry off the trim panel inside the door handle with a flat blade screwdriver
    • Remove the two T30 Torx screws behind the door pull
    • Remove the Phillips head screw from inside the door panel
    • Pull off the door handle bezel
    • Disconnect the door lock wiring harness
    • Pry off the door panel with a putty knife or a door panel clip tool
    • Pull the door panel up and off of the window sill
    • Disconnect the speaker wiring harness
    • Carefully peel back the water shield
  2. step : Removing the Window Regulator (4:10)
    • Raise or lower the window by hand to access the window track
    • Remove the two 10mm bolts from the window track
    • Raise the window by hand
    • Loosen the three 10mm bolts for the motor
    • Remove the lower two 10mm bolts from the regulator
    • Loosen the upper two 10mm bolts for the regulator
    • Disconnect the window motor wiring lead
    • Lift the regulator up and pull it out of the door
  3. step : Installing the New Window Regulator (6:49)
    • Transfer the bolts from the old to the new regulator
    • Put the new regulator down into the door
    • Hang the motor in place by its bolts
    • Hang the regulator in place with the upper two bolts
    • Start the two lower regulator bolts by hand
    • Tighten the seven 10mm bolts
    • Push the window down onto its track by hand
    • Insert the two 10mm bolts into the window track
    • Connect the window motor wiring harness
    • Connect the window switch wiring harness
    • Turn the vehicle ignition on
    • Test the window with the window switch
    • Turn off the ignition
    • Disconnect the window switch wiring harness
  4. step : Reinstalling the Door Panel (9:37)
    • Put the water shield back into place
    • Connect the speaker wiring harness
    • Hang the door panel on the door
    • Push in the door panel clips
    • Connect the door lock wiring harness
    • Push on the door handle bezel
    • Insert the Phillips screw into the door handle bezel
    • Insert the two T30 Torx screws behind the door panel
    • Push the trim panel into the door handle
    • Connect the window switch wiring harnesses
    • Push the window switch panel into the door panel

Tools needed for replacement:

    General Tools

  • Putty Knife

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Door Panel Removal Tool

  • Wrenches - Metric

  • 10mm Wrench

5.00/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Perfect fit
This part was perfect fit for the car. Very reasonable and shipped as promised
July 19, 2018
window regulator
The window regulator that was ordered by me was delivered in the estimated time frame. The product is of high quality and when installed worked great! I would definitely recommend 1A AUTO to whomever is looking for top notch parts for there auto.
October 5, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1997-2005Buick Century Buick Century Front Power Window Regulator without Motor Driver Side
1997-2004Buick Regal Buick Regal Front Power Window Regulator without Motor Driver Side
1998-2002Oldsmobile Intrigue Olds Intrigue Front Power Window Regulator without Motor Driver Side
Part #: 1AWRG00595


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(10:46 min)