Part Details

  • Regulator Option: without Motor
  • Operation: Power

Specifications:

  • LH (Driver Side) FRONT
  • Does NOT include the power window motor
  • Replaces dealer part numbers: 3L5Z-1023209-AA, ZZM1-59-560B, 3L5Z1023209AA, ZZM159560B
  • Direct replacement
  • Built to strict quality control standards

Please Note:

This window regulator is designed to work with factory style motors only.  Due to variations in aftermarket designs, replacement motors may not have the correct gear style.

Please Note:

This window regulator is a high quality aftermarket part that meets or exceeds the performance of the original. It has been subjected to extensive testing and quality control standards. That is why we offer this regulator with our superior warranty!

Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Item Condition: New

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Disconnect the battery (1:00)
    • Use your 8 mm wrench to disconnect the negative battery terminal
  2. step : Remove the door panel (1:16)
    • Remove the two Phillips screws under the door pull.
    • Remove the door pull panel and unplug the wiring harness.
    • Unscrew two more Phillips screws.
    • Pull the door panel up and off.
    • Carefully remove the water shield
  3. step : Remove the window regulator (5:00)
    • Disconnect the window regulator harness.
    • Remove the window from the regulator by drilling out the rivets.
    • Tape the window up and secure out of the way.
    • Remove the rivets mounting the window regulator by drilling them out with a 3/8 drill bit.
    • Carefully finesse the regulator out of the door.
  4. step : Install the new window regulator (6:00)
    • Place the regulator into the door
    • Replace the bolts and lock nuts and tighten.
    • Plug in the wiring harness.
    • Carefully un-tape the window and bolt the window into the regulator.
    • Test the regulator before reassembling the door panel.
    • See our other videos for more detailed door panel reassembly instructions.
    • Reconnect the negative battery terminal with your 8 mm wrench

Tools needed for replacement:

    Drills, Drill Bits & Related

  • 3/8 Inch Drill Bit
  • Drill

  • Materials, Fluids, and Supplies

  • Painter's Tape

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Wrenches - Metric

  • 8mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
1993-2011Ford Ranger Ford Ranger Front Power Window Regulator without Motor Driver Side
1994-2010Mazda B2300 Truck Mazda B2300 Truck Front Power Window Regulator without Motor Driver Side
1994-2010Mazda B2500 Truck Mazda B2500 Truck Front Power Window Regulator without Motor Driver Side
1994-2010Mazda B3000 Truck Mazda B3000 Truck Front Power Window Regulator without Motor Driver Side
1994-2010Mazda B4000 Truck Mazda B4000 Truck Front Power Window Regulator without Motor Driver Side

This part replaces:

  • Partslink FO1350113
  • Hollander 125-01768L
  • Dorman 740-831
  • OE # ZZM159560B
Only 3 left in stock
Part #: 1AWRG00326


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(07:48 min)