Specifications:

  • Comes as a 12 Piece Set
    • Fits LH (Drive Side) & RH (Passenger Side) Front & Rear
  • Includes 8 sashes
  • Direct replacements
  • Built to strict quality control standards

Please Note: These window regulators are high quality aftermarket parts that meets or exceeds the performance of the original. They have been subjected to extensive testing and quality control standards. That is why we offer these regulators with our superior warranty!

Installation

  • This repair is easier than you may think. You'll find our installation videos helpful. In our experience removing and replacing the door panel is the most involved step in the repair. On most vehicles this only requires removing a few screws and push-in clips.
  • You'll get a great feeling of accomplishment after you complete this repair knowing you saved money, and you didn't have to give up your car for a day at the repair shop. Your passengers and other drivers will be amazed.

Fit guaranteed

  • 1A Auto will refund you with no hassle if this window regulator does not fit the application stated.
  • This regulator will install just as your original does. Save time and money.

Quality

  • Be confident this part will work right. Every regulator is tested after assembly to make sure all mechanisms are working correctly.
  • It is important that your new regulator works for a long period of time. The design of this regulator is tested to withstand 10,000 cycles. That is enough to raise and lower your window 3 times per day for 9 years.

Value

  • Windows that don't work can be frustrating. They can also hurt your vehicles value. An inoperable window could mean $200-$500 discounted off a dealer trade value or asking price.
  • Some shops and dealers charge more for parts and repairs when they think you don't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly repair bill.
Direct Fit

Direct fit, pre-assembled parts made ready to fit your vehicle and provide easy and trouble-free installation.

Rigorously Tested

Build to strict quality standards

Highest Quality Materials

Made from the highest quality materials for extreme durability and premium performance.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Disconnecting the Battery (1:04)
    • Disconnect the negative battery cable with an 8mm wrench
  2. step : Removing the Door Panel (1:14)
    • Pry off the trim piece below the door pull with a flat blade screwdriver
    • Remove the two Phillips head screws below the door pull
    • Pry off the mirror base trim piece by hand
    • Disconnect the speaker wiring lead
    • Pry off the courtesy light with a flat blade screwdriver
    • Remove the Phillips head screw inside the courtesy light
    • Pry out the door panel with a door panel clip tool or putty knife
    • Lift the door panel up and off
    • Disconnect the door lock wiring harness
    • Disconnect the window switch wiring harnesses
    • Disconnect the mirror switch wiring harness
    • Disconnect the trunk switch wiring harness
    • Disconnect the latch cables from the door handle
    • Carefully peel off the water shield
  3. step : Removing the Window (4:12)
    • Reconnect the negative battery cable
    • Connect the window switch wiring harness
    • Lower the window with the switch
    • Remove the two 10mm bolts from the window sash connectors
    • Raise the window by hand
    • Pull off the window weather strip
    • Tip the window forward
    • Pull the window out, back first
  4. step : Removing the Window Sash Connector (5:06)
    • Heat the sash connector with a heat gun
    • Pry off the sash connector with a putty knife
    • Scrape off the adhesive with a putty knife
    • Scrape off the adhesive with a razor blade
    • Mark the sash connector mounting area with a marker
    • Clean the adhesive off with mineral spirits or isopropyl alcohol
    • Continue to remove the adhesive with a razor blade
  5. step : Installing the New Window Sash Connector (6:09)
    • Apply urethane glue to the sash connector mounting area
    • Slide on the new sash connector
    • Stand the window up on the sash connector
    • Let the glue cure
    • Follow your adhesive's curing directions
  6. step : Reinstalling the Window (7:23)
    • Tip the window into the door, front first
    • Slide the window down onto the regulator by hand
    • Push on the window weather strip
    • Install the two 10mm bolts into the sash connectors
    • Test the window with the switch
    • Leave the window in the up position for a day or two
  7. step : Reinstalling the Door Panel (8:55)
    • Put the water shield into place
    • Connect the door lock wiring harness
    • Connect the mirror switch wiring harness
    • Connect the window switch wiring harnesses
    • Connect the trunk switch wiring harness
    • Lift the door panel into place
    • Push in the door panel clips
    • Insert the two Phillips screws below the door pull
    • Insert the Phillips screw inside the courtesy light
    • Push on the courtesy light
    • Push in the door pull trim piece
    • Connect the speaker wiring lead
    • Push on the mirror base trim piece
  8. step : Reconnecting the Battery (11:23)
    • Reconnect the negative battery cable with an 8mm wrench if you have not already done so

Tools needed for replacement:

    General Tools

  • Putty Knife
  • Heat Gun

  • Materials, Fluids, and Supplies

  • Marker / Writing Utensil
  • Mineral Spirits
  • Cloth Rags

  • Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Door Panel Removal Tool

  • Wrenches - Metric

  • 8mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1999-2004 Olds Alero 4 Door Front & Rear Power Window Regulator & Sash Kit with Motor 12 Piece Set
  • 1999-2005 Pontiac Grand Am 4 Door Front & Rear Power Window Regulator & Sash Kit with Motor 12 Piece Set
Part #: 1AWRK01285


How-to Video:

(11:47 min)