Replaces

Wheel Hub Bearing Module Pair TRQ BHA52865 - 1ASHS00399

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Wheel Bearing & Hub Assembly Features & Benefits:
      Direct Fit Replacement
      Precision Engineered
      Highest Quality Materials
  • Bearing Type:   Ball Bearing
  • Quantity:   Pair

 

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

BHA52907 Axle / Spindle Nut Torque Specification

  1. step : Removing the Wheel (0:52)
    • Pry off the center cap with the Audi pick removal tool or a pick
    • Loosen the 17mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Hub Axle Nut (1:27)
    • Install two of the lug nuts a few threads by hand into the rotor
    • Hold the hub from turning with a pry bar
    • Remove the axle nut with a 17mm Allen socket
  3. step : Removing the Brake Rotor and Caliper (1:45)
    • Remove the upper M8 Allen bolt from the wheel speed sensor
    • Remove the sensor from the hub
    • Remove the 21mm bolts from the caliper carrier to the back of the spindle
    • Remove the caliper assembly and zip tie it out of the way
    • Remove the lug nuts from the rotor
    • Remove the T25 Torx screw from the rotor
    • Remove the rotor
  4. step : Removing the Hub Assembly (3:34)
    • Spray rust penetrant on the threads behind the hub
    • Insert the axle bolt a few threads
    • Tap the axle bolt a few times with the hammer
    • Release the axle from the hub
    • Remove the bolt
    • Undo the four M12 triple square bolts from the back of the knuckle
    • Remove the hub with a hub puller and slider
    • Or work the hub off with a hammer and chisel
    • If the bearing is still stuck in the spindle, chisel it out by working it out behind without gauging the aluminum of the spindle
  5. step : Installing the Hub Assembly (7:59)
    • Start the bolts into the hub
    • Line up the hub with the axle
    • Insert the axle bolt a couple of threads
    • Tighten the M12 triple square bolts into the hub evenly
    • Torque the NEW bolts to 60 foot-pounds and add a 90 degree of a turn
  6. step : Installing the Brake Rotor (9:15)
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
    • Insert the T25 Torx screw into place
    • Put the caliper on
    • Tighten the 21mm bolts by hand
    • Torque the caliper carrier bolts to 140 foot-pounds
    • Insert the wheel speed sensor into place
    • Tighten the 5mm Allen screw to the speed sensor
  7. step : Reattaching the Wheel (10:46)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 90 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    Allen Wrenches

  • 5mm Allen Wrench

  • General Tools

  • Jack Stands
  • Chisel
  • Hammer
  • Pick
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • M8 Bolt

  • Ratchets & Related

  • Torque Wrench

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 21mm Socket
  • 17mm Socket

  • Specialty Tools

  • Audi Wheel Cap Removal Tool

  • Torx Drivers & Sockets

  • T25 Torx Driver

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Does this come with the hardware that you are required to change . If not do you sell the hardware required for this repair separately?
Anthony R March 8, 2017
This set of bearing modules do not come with any hardware.
Tim K March 12, 2017
Year Make Model Description
2002-2008Audi A4 Audi A4 Front Wheel Hub Bearing Module Pair TRQ
2002-2008Audi A4 Quattro Audi A4 Quattro Front Wheel Hub Bearing Module Pair TRQ
1999-2002Audi A6 Audi A6 V8 4.2L Front Wheel Hub Bearing Module Pair TRQ
2002Audi A6 Audi A6 V6 2.7L with 17 or 18 Inch Wheels Front Wheel Hub Bearing Module Pair TRQ
2003-2004Audi A6 Audi A6 Front Wheel Hub Bearing Module Pair TRQ
1999-2002Audi A6 Quattro Audi A6 Quattro V8 4.2L Front Wheel Hub Bearing Module Pair TRQ
2002Audi A6 Quattro Audi A6 Quattro V6 2.7L with 17 or 18 Inch Wheels Front Wheel Hub Bearing Module Pair TRQ
2003-2004Audi A6 Quattro Audi A6 Quattro Front Wheel Hub Bearing Module Pair TRQ
2000-2003Audi A8 Quattro Audi A8 Quattro Front Wheel Hub Bearing Module Pair TRQ
2009Audi Cabriolet Audi Cabriolet Front Wheel Hub Bearing Module Pair TRQ
2007-2008Audi RS4 Audi RS4 Front Wheel Hub Bearing Module Pair TRQ
2003-2004Audi RS6 Audi RS6 Front Wheel Hub Bearing Module Pair TRQ
2000Audi S4 Audi S4 (Built Before 11/99 Production Date) Front Wheel Hub Bearing Module Pair TRQ
2004-2008Audi S4 Audi S4 Front Wheel Hub Bearing Module Pair TRQ
2002-2003Audi S6 Audi S6 Front Wheel Hub Bearing Module Pair TRQ
2001-2003Audi S8 Audi S8 Front Wheel Hub Bearing Module Pair TRQ
2002-2005Volkswagen Passat VW Passat 4 Motion W8 4.0L Front Wheel Hub Bearing Module Pair TRQ
Part #: 1ASHS00399


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

TRQ
Brand #: BHA52865

How-to Video:

(11:54 min)