Replaces

Wheel Hub Bearing & Axle Kit TRQ BHA52934 - 1AAHK00019

Part Details

  • Wheel Bearing & Hub Assembly Features & Benefits:
    Direct Fit Replacement
    Precision Engineered
    Highest Quality Materials
  • Bearing Type: Tapered Roller Bearing
  • Quantity: 4 Piece Set
  • Kit Includes:
    (2) Front CV Axles
    (2) Front Hub Assemblies

  • Brand New Suspension Kit
  • Comes as a 4 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards

What are Tapered Bearings and Why Use Them?

Tapered bearings are better than roller ball bearings at handling forces exerted on the bearing during cornering (known as axial load) in trucks and large cars. 

Roller ball bearings have spherical ball bearings between two straight rings (called races). Tapered bearings use tapered rollers shaped like flat-topped cones and two races angled from the outside to the inside of the bearing. The greater the angle, the more axial load the bearing can handle.

Your model came from the factory with tapered bearings. This type of bearing handles cornering forces better for trucks and large cars. Roller ball bearings work well for smaller cars, but replacing a tapered bearing with a roller ball bearing will result in increased wear and faster failure.

 

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:43)
    • Pry off the center cap with a flat blade screwdriver
    • Remove the 30mm hub nut
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Loosening the Axle (1:31)
    • Remove the 18mm control arm nut
    • Twist the 18mm on by hand a few threads
    • Hammer the wheel knuckle until it slides down
    • Hammer the axle out with a pry bar
    • Remove the 18mm nut
    • Pull the wheel knuckle forward
  3. step : Removing the Stabilizer Link (2:39)
    • Insert a 15mm socket and ratchet on the top
    • Insert a 16mm socket and ratchet on the bottom
    • Remove the bolt and remove the stabilizer link
    • If the link is broken, fill the top with rust penetrant
    • Insert locking pliers onto the bar
    • Remove the lower bolt with a 16mm socket and ratcher
    • Remove the plastic tube, remove the rest of the plastic with a hammer and chisel
    • Use locking pliers on the upper bushing and remove the lower nut
    • Hammer out the stabilizer link
  4. step : Removing the Axle (4:23)
    • Turn the wheel knuckle
    • Slide the axle back and remove it from the hub
  5. step : Installing the Axle (4:48)
    • Insert the axle into the hub
    • Preliminarily tighten the hub nut
    • Insert the axle into the differential case
    • Push the ball joint into the wheel knuckle
    • Hand tighten the 18mm nut
    • Check to make sure the axle is in place
    • Tighten the 18mm nut
    • Tighten the 18mm nut to 90 foot-pounds
  6. step : Reinstalling the Stabilizer Link (6:09)
    • Slightly jack up the other side of the vehicle
    • Insert a washer onto the link
    • Insert a bushing onto the link
    • Insert the stabilizer link into place
    • Insert a bushing onto the link
    • Insert a washer onto the link
    • Insert the tube onto the link
    • Insert a washer onto the link
    • Insert a bushing onto the link
    • Insert the link through the sway bar
    • Insert a bushing onto the link
    • Insert a washer onto the link
    • Tighten the 15mm nut to the top of the link
    • Lower the jack
    • Tighten the 16mm nut on the bottom of the link
  7. step : Reattaching the Wheel (7:45)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the hub nut to 180 foot-pounds
    • Tighten the lug nuts to between 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 19mm Socket
  • 18mm Socket
  • 16mm Socket
  • 30mm Socket

4.5 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
1
0
0
0
Wheel hub bearing & axle kit
My son,(who is a diesel mechanic) was very impressed on the quality of the car parts. The parts arrived on time. Thank you.
May 3, 2018
Purchased
5 months ago
All parts were high quality for a great price! The only problem I had was that the anti-lock brake electrical connectors on the new hubs did not fit into my wiring harness connectors. I had to cut off the connectors from the old hubs and solder them to the new hubs so I could plug them back in under the hood. Also, your videos are always outstanding!!
February 23, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 5 answers
Do the hub bearings come already assembled or do they need to be pressed?
Jeremiah on Apr 3, 2018
BEST ANSWER: Everything comes together, not hard to replace as long as you have some mechanical skill and watch the installation how to vidio.

Vehicle Fit

Year Make Model Description
2002-2005Ford Explorer Ford Explorer 4 Door Front Wheel Hub Bearing & Axle Kit 4 Piece Set TRQ
2003-2005Lincoln Aviator Lincoln Aviator Front Wheel Hub Bearing & Axle Kit 4 Piece Set TRQ
2002-2005Mercury Mountaineer Mercury Mountaineer Front Wheel Hub Bearing & Axle Kit 4 Piece Set TRQ

This part replaces:

  • A1 Cardone 66-2153
  • A1 Cardone 66-2154
  • Reference Number 146 515050
  • Dorman 4110405
  • Hollander 447-02639L
  • Hollander 447-02638R
  • Hollander 538-01585, 538-01616
  • TRQ BHA52934
  • OE # 3L2Z 2C204 AA
  • OE # 1L243A428AC
  • OE # 4L2Z 1104 AA
  • OE # 6L2Z3A427AA
  • OE # 6L2Z 3A428 AA
Part #: 1AAHK00019


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

TRQ
Brand #: BHA52934

How-to Video:

(08:47 min)