Replaces

Wheel Hub Bearing & Axle Kit TRQ BHA52925 - 1AAHK00005

These replacement front hub and bearing assemblies & axles are just what you need to get your vehicle in good working order again!

Wheel Hub Specifications:

  • Come as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part number: 88957259
  • 3 Bolt Flanges (Bolt to Steering Knuckles with 3 Bolts)
  • Fit 5 Lug Wheels
  • Wheel Mounting Studs already installed
  • Include ABS Sensors and Plug Wires

CV Axle Specifications:

  • Come as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT OUTER
  • Brand New
    • Not remanufactured
    • No core charges
  • Overall Length: 21-3/16"
  • Replaces dealer part numbers: 601243, 601411, 10379128, 10379129, 22692204, 25844557, 26059860, 26066727, 26091316
  • Direct replacements
  • Built to strict quality control standards

Note: For the 2004-05 Malibu Classic requiring a VIN (Vehicle Identification Number), please match the 4th digit of your VIN number to the VIN code on your title. Your vehicles VIN number can be found in the lower left corner of the windshield or on your registration.

These hub and bearing assemblies & axles are great replacements and have good cost savings over dealer units.

Precision Engineered

From the highest grade SAE 1055 / 65Mn high carbon steel to exact OEM design.

100% Factory tested to precise OEM tolerances.

Highest Quality Materials

High quality, multi-lip seal reduces the intrusion of dirt and water. Heavy duty grease resists high temperature, moisture, and reduces intense friction.

Direct Fit Replacement

Guaranteed to fit and function correctly for your specific application.

Part Details

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (1:18)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Remove the 35mm hub nut
    • Pull off the wheel
  2. step : Removing the Brake Caliper (1:50)
    • Remove the two 13mm bolts from the caliper
    • Pry off the caliper
    • Remove the brake rotor
  3. step : Removing the Hub (3:26)
    • Remove the three bolts that hold in the hub
    • Disconnect the ABS sensor if you have one
    • Reach in behind and remove the clip holding the hub
    • For the center, use a large axle nut socket
    • Once the center bolt is removed, simply pull the hub off the axle shaft
    • If it doesn't come off, you'll need an axle puller or a gear puller. Do not use a hammer
  4. step : Installing the Hub (9:26)
    • Once the new hub is ready, place it into position on the axle shaft
    • Take the original bolts and reattach the hub
  5. step : Step 5: Replacing the hub (9:26)
    • Once the new hub is ready, place it into position on the axle shaft.
    • Take the original bolts and reattach the hub.

Tools needed for replacement:

    Air Powered Tools

  • 3/8 Inch Air Impact Gun

  • General Tools

  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 19mm Socket
  • 35mm Socket

4.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
1
0
0
0
Great parts/prices
Parts came within a few days. The parts are of good quality. They fit without any difficulties. The only issues I had with this order: the outer tie rods ends didn't have grease fittings and the half-axles hab the female hub instead of the male hub. Simply changed the male hub from the old axle with the female hub of the new axle and the new axle fit without any issues. Parts have been in place for a dew weeks and no issues up to this point.. I recommend 1aauto to everyone needing parts.
April 22, 2018
Purchased
3 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2004-2005 Chevy Classic Front Wheel Hub Bearing & Axle Kit with ABS Brakes & for Models with Automatic Transmission TRQ
  • 1997-2003 Chevy Malibu Front Wheel Hub Bearing & Axle Kit with ABS Brakes & for Models with Automatic Transmission L4 2.4L TRQ
  • 1997-2003 Chevy Malibu Wheel Hub Bearing & Axle Kit Front with ABS Brakes & for Models with Automatic Transmission V6 3.1L TRQ
  • 1999-2004 Olds Alero Front Wheel Hub Bearing & Axle Kit for Models with Automatic Transmission TRQ
  • 1997-1999 Olds Cutlass Front Wheel Hub Bearing & Axle Kit for Models with Automatic Transmission (excluding Supreme Models) TRQ
  • 1999-2005 Pontiac Grand Am Front Wheel Hub Bearing & Axle Kit for Models with Automatic Transmission TRQ

This part replaces:

  • TRQ BHA52925
Part #: 1AAHK00005

TRQ
Brand #: BHA52925

How-to Video:

(10:00 min)