Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   Pair
  • Front or Rear Location:   Rear

TIMKEN WHEEL BEARINGS: 513067

These replacement wheel bearings are just what you need to get your vehicle in good working order again.

Specifications:

  • Brand New Timken Wheel Bearings
  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) REAR
  • Replaces dealer part numbers: 80944-21260, 9442126, 12479031, 8094421260
  • Direct replacements
  • Built to strict quality control standards
  • Fit models with 8.5" Ring Gear only

These wheel bearings make great replacements and have good cost savings over the dealer parts!

Note:
These parts are authentic Timken brand products that are supplied and packaged by Timken.   In some cases, Timken will source parts from other high quality suppliers such as SKF and Koyo. These parts are subjected to the very same testing and quality standards as all Timken products.

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:36)
    • Loosen the lug nut covers with a 22mm socket
    • Pull off the center cap
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (0:59)
    • Remove the two 12mm bolts from the brake caliper
    • Push in the brake caliper pistons with a large C-clamp
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
  3. step : Removing the Brake Rotor (1:43)
    • Remove the two 18mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Pull the rotor off
  4. step : Removing the Differential Cover (2:15)
    • Remove severe rust from the differential cover bolts with a hammer and chisel
    • Remove all but the bottom 13mm bolts from the differential cover
    • If removing rust made the bolts smaller, hammer a 1/4 inch socket onto the bolts
    • Have a drain pan ready
    • Remove the bottom 13mm bolts from the differential cover
    • Pry out the bottom of the differential cover with the hammer and chisel
    • Thread the top 13mm bolt into the differential cover
    • Allow the fluid to drain
    • Pry out the bottom of the differential cover with the chisel
    • Remove the top 13mm bolt
    • Pull the differential cover down and out
  5. step : Cleaning the Differential (5:05)
    • Clean any debris out of the differential with a vacuum
    • Clean the differential with a cloth rag
    • Scrape off the old differential cover gasket with a razor blade
    • Clean any residue with a wire brush
  6. step : Removing the Axle (5:44)
    • Put the vehicle in neutral
    • Turn the differential chuck by hand so the 8mm bolt is visible
    • Remove the 8mm bolt
    • Pull the pin out of the differential
    • Push the axle in
    • Turn the driveshaft by hand until the small axle C-clamps are visible
    • Remove the C-clamp with a magnet
    • Pull the axle out
  7. step : Removing the Axle Bearing (6:45)
    • Put the correct size bearing puller into place
    • Thread the nut on the axle puller
    • Pull the bearing with the bearing puller
  8. step : Installing the New Axle Bearing (7:48)
    • Put the new bearing into place
    • Hammer the bearing into place with a bearing installation tool and hammer
    • Drive the bearing in to the positioning line
    • Apply gear oil to the bearing
    • Tap in the bearing seal with a hammer
  9. step : Reinstalling the Axle (8:57)
    • Slide the axle into place, being sure not to drag it on the bearing seal
    • Push the axle into the differential
    • Insert the C-clamp onto the axle
    • Pull the axle out
    • Insert the pin into the differential
    • Insert the 8mm bolt into the differential
  10. step : Preparing the Differential Cover (10:45)
    • Apply RTV to the new differential cover
    • Place the gasket onto the differential cover, lining up the bolt holes
    • Apply RTV to the gasket
  11. step : Reinstalling the Differential Cover (11:04)
    • Clean any fluid off of the mounting surface with a cloth rag
    • Put the differential cover into place
    • Thread the top 13mm bolt into the differential cover
    • Thread the remaining 13mm bolts
    • Replace the wiring harness connected to one of the top bolts
    • Let the RTV set
    • Tighten the 13mm bolts to 15 foot-pounds of torque in a crossing pattern
  12. step : Refilling the Differential (12:17)
    • Remove the filler plug with a 3/8 inch ratchet
    • If necessary, hammer the ratchet into the plug
    • Add fluid to the differential until it drips out the fill hole
    • Check that the fluid level is up to the fill hole
    • Tighten the fill plug into the fill hole
  13. step : Reinstalling the Brake Rotor (13:19)
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
    • Put the bracket back into place
    • Start the 18mm bolts by hand
    • Tighten the 18mm bolts to 85 foot-pounds of torque
  14. step : Reinstalling the Brake Pads (14:12)
    • Install the brake pads into the bracket
    • Put the caliper on
    • Thread the 12mm bolts by hand
    • Tighten the 12mm bolts to 30 foot-pounds
  15. step : Reattaching the Wheel (14:45)
    • Remove the placeholder lug nut
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Tighten the lug nut covers with a 22mm socket
  16. step : Testing the Brakes (15:23)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Razor Blade / Gasket Scraper
  • Large C-Clamp
  • Hammer
  • Chisel
  • Floor Jack
  • Magnet - Extendable
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Gear Oil
  • RTV
  • Cloth Rags

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • A Piece of Pipe (for leverage)
  • Ratchet
  • 3/8 Inch Drive Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 12mm Socket
  • 22mm Socket
  • 13mm Socket
  • 18mm Socket

  • Specialty Tools

  • Race Installation Tools

  • Wrenches - Metric

  • 8mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2004-2007Buick Rainier Buick Rainier Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
1999-2000Cadillac Escalade Cadillac Escalade Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
2002-2013Cadillac Escalade Cadillac Escalade Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
2003-2005Chevy Astro Chevy Astro Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
2007-2013Chevy Avalanche Chevy Avalanche Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
2002-2006Chevy Avalanche 1500 Chevy Avalanche 1500 Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
1990-1993Chevy Blazer Full Size Chevy Blazer Full Size Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
1988-1999Chevy C1500 Truck Chevy C1500 Truck Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
2004-2012Chevy Colorado Chevy Colorado Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
1996-2013Chevy Express 1500 Van Chevy Express 1500 Van Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
1988-1999Chevy K1500 Truck Chevy K1500 Truck Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
1995-2003Chevy S10 Pickup Chevy S10 Pickup Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
2003-2006Chevy SSR Chevy SSR Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
1999-2013Chevy Silverado 1500 Chevy Silverado 1500 Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
2007Chevy Silverado 1500 Classic Chevy Silverado 1500 Classic Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
2000-2013Chevy Suburban 1500 Chevy Suburban 1500 Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
2000-2013Chevy Suburban 2500 Chevy Suburban 2500 Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
1992-1999Chevy Suburban C1500 Chevy Suburban C1500 Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
1992-1999Chevy Suburban C2500 Chevy Suburban C2500 Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
1992-1999Chevy Suburban K1500 Chevy Suburban K1500 Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
1992-1999Chevy Suburban K2500 Chevy Suburban K2500 Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
1995-2013Chevy Tahoe Chevy Tahoe Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
2002-2009Chevy Trailblazer Chevy Trailblazer Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
2003-2005Chevy Trailblazer EXT Chevy Trailblazer EXT Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
1988-1999GMC C1500 Truck GMC C1500 Truck Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
2004-2012GMC Canyon GMC Canyon Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
2002-2009GMC Envoy GMC Envoy Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
2003-2004GMC Envoy XL GMC Envoy XL Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
1992-1994GMC Jimmy S-15 GMC Jimmy S-15 Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
1988-1999GMC K1500 Truck GMC K1500 Truck Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
1995-2003GMC S-15 Sonoma GMC S-15 Sonoma Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
2003-2005GMC Safari GMC Safari Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
1996-2013GMC Savana 1500 Van GMC Savana 1500 Van Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
1999-2013GMC Sierra 1500 GMC Sierra 1500 Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
2007GMC Sierra 1500 Classic GMC Sierra 1500 Classic Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
1992-1999GMC Suburban C1500 GMC Suburban C1500 Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
1992-1999GMC Suburban K1500 GMC Suburban K1500 Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
1988-1991GMC Suburban R1500 GMC Suburban R1500 Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
1988-1991GMC Suburban V1500 GMC Suburban V1500 Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
1992-2013GMC Yukon GMC Yukon Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
2000-2013GMC Yukon XL 1500 GMC Yukon XL 1500 Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
2001GMC Yukon XL 2500 GMC Yukon XL 2500 Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
2006-2010Hummer H3 Hummer H3 Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
2009-2010Hummer H3T Hummer H3T Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
2003-2008Isuzu Ascender Isuzu Ascender Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
2006Isuzu i-280 Isuzu i-280 Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
2007-2008Isuzu i-290 Isuzu i-290 Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
2006Isuzu i-350 Isuzu i-350 Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
2007-2008Isuzu i-370 Isuzu i-370 Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
2002-2004Oldsmobile Bravada Olds Bravada Rear Wheel Bearing for Models with 8.5 Inch Ring Gear Pair Timken 513067
2005-2009Saab 9-7X Saab 9-7X Rear Wheel Bearing Pair Timken 513067
Only 1 left in stock
Part #: TKSHS00712


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Timken
Brand #: 513067

How-to Video:

(15:54 min)