Replaces

Wheel Bearing & Hub Assembly TRQ BHA86533 - 1ASHS01218

Precision Engineered

Precision Engineered using the highest grade SAE 1055 / 65Mn high carbon steel to exact OEM design.

100% Factory tested to precise OEM tolerances.

Highest Quality Materials

High quality, multi-lip seal reduces the intrusion of dirt and water, keeping grease clean for a longer bearing life.

Premium, heavy duty grease resists high temperature, moisture, and reduces intense friction pressure to help extend the life of the bearing.

Direct Fit Replacement

Direct fit replacement part is guaranteed to fit and function correctly for your specific application

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:47)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Drum (1:07)
    • Remove the two Phillips head screws from the brake drum with an impact screwdriver and a hammer
    • Apply rust penetrant to the wheel studs
    • Strike the drum with a hammer to loosen it
    • Tighten an M12 bolt into the drum to pull it off
    • Strike the drum with a hammer to loosen it
    • Pull off the drum
  3. step : Removing the Hub (2:37)
    • Remove the hub nut cap with a hammer and flat blade screwdriver
    • Remove the 32mm hub nut
    • Pull off the hub
  4. step : Installing the Hub (3:47)
    • Put the new hub into place
    • Start the hub nut by hand
    • Tighten the hub nut to 152 foot-pounds of torque
  5. step : Installing the Brake Drum (4:48)
    • Slide on the brake drum
    • Tap the drum into place with a hammer
    • Insert the two Phillips screws into the brake drum
    • Tap on the hub nut cap with a hammer
  6. step : Reattaching the Wheel (6:00)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Chisel
  • Floor Jack
  • Center Punch
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 32mm Socket
  • 22mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1991-1993 Ford Escort Wheel Bearing & Hub Assembly (1) 32mm Axle Nut Socket Rear Pair with TRQ
  • 1994-1996 Ford Escort without ABS Brakes Wheel Bearing & Hub Assembly (1) 32mm Axle Nut Socket Rear Pair with TRQ
  • 1997-2002 Ford Escort without ABS Brakes Wheel Bearing & Hub Assembly (1) 32mm Axle Nut Socket Rear for Models with Rear Drum Brakes Pair with TRQ
  • 2003 Ford ZX2 without ABS Brakes Wheel Bearing & Hub Assembly (1) 32mm Axle Nut Socket Rear for Models with Rear Drum Brakes Pair with TRQ
  • 1991-1993 Mercury Tracer Wheel Bearing & Hub Assembly (1) 32mm Axle Nut Socket Rear Pair with TRQ
  • 1994-1996 Mercury Tracer without ABS Brakes Wheel Bearing & Hub Assembly (1) 32mm Axle Nut Socket Rear Pair with TRQ
  • 1997-1999 Mercury Tracer without ABS Brakes Wheel Bearing & Hub Assembly (1) 32mm Axle Nut Socket Rear for Models with Rear Drum Brakes Pair with TRQ

This part replaces:

  • TRQ BHA86533
Part #: 1ASHS01218


TRQ
Brand #: BHA86533

How-to Video:

(06:35 min)