Replaces

Wheel Bearing & Hub Assembly TRQ BHA84982 - 1ASHS01188

 

Precision Engineered

Precision Engineered using the highest grade SAE 1055 / 65Mn high carbon steel to exact OEM design.

100% Factory tested to precise OEM tolerances.

Highest Quality Materials

High quality, multi-lip seal reduces the intrusion of dirt and water, keeping grease clean for a longer bearing life.

Premium, heavy duty grease resists high temperature, moisture, and reduces intense friction pressure to help extend the life of the bearing.

Direct Fit Replacement

Direct fit replacement part is guaranteed to fit and function correctly for your specific application

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:04)
    • Loosen the caps and remove the wheel cover.
    • Remove the 30mm lug nut in the center of the wheel.
    • Loosen the other lug nuts.
    • Jack the car up and remove the lug nuts.
    • Pull the wheel off.
  2. step : Removing the Brakes (1:49)
    • Using a screwdriver pry the caliper from the rotor.
    • Remove the two 14mm bolts on the back of the caliper.
    • Pull the caliper off and set it aside.
    • Pry the pads off.
    • Remove the two 15mm bolts securing the caliper bracket (Use breaker bar or pipe for leverage).
    • Remove the caliper bracket.
    • Remove the rotor.
  3. step : Removing the Hub (3:10)
    • If the axel doesn't just push out hit it once with a hammer.
    • Remove the three bolts securing the hub.
    • Disconnect ABS harness if the vehicle has this.
    • Hit the side of the hub with a hammer to loosen it up.
    • Pull the hub free.
  4. step : Replacing the Hub (5:11)
    • Line the new hub with the back plate.
    • Reconnect the ABS harness if the vehicle has this.
    • Replace the three bolts that secure the hub. 70 – 75ft/lbs.
    • Replace the washer and nut on the hub.
  5. step : Replacing the Brakes (7:00)
    • Put the rotor in place and hold it on with one lug nut.
    • Put the caliper bracket back into place.
    • Replace the caliper bolts. 75 – 80 ft/lbs.
    • Put the brake pads back into place.
    • Replace the caliper and caliper bolts. Tighten to 20 – 22ft/lbs.
  6. step : Replace the Wheels (7:43)
    • Remove the lug nut.
    • Put the wheel into place.
    • Replace the lug nuts.
    • Lower the vehicle and tighten the lug nuts to 100ft/lbs.
    • Tighten the center nut to 155ft/lbs.
    • Replace the hub cap if this applies.
  7. step : Prepare the Brakes (8:37)
    • Pump the Brakes until they are firm before road testing.
    • Test stop from 5 then 10 mph.

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Hammer

  • Ratchets & Related

  • Socket Extensions
  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 15mm Socket
  • 30mm Socket
  • 18mm Socket
  • 16mm Socket
  • 17mm Socket
  • 14mm Socket
  • 19mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2005-2009 Chevy Cobalt Front Wheel Bearing & Hub Assembly for Models with 4 Lug Wheels without ABS Brakes with (1) 30mm Axle Nut Socket TRQ
  • 2007-2009 Pontiac G5 Front Wheel Bearing & Hub Assembly for Models with 4 Lug Wheels without ABS Brakes with (1) 30mm Axle Nut Socket TRQ
  • 2005-2006 Pontiac Pursuit Front Wheel Bearing & Hub Assembly for Models with 4 Lug Wheels without ABS Brakes with (1) 30mm Axle Nut Socket TRQ
  • 2003-2007 Saturn Ion Front Wheel Bearing & Hub Assembly for Models with 4 Lug Wheels without ABS Brakes with (1) 30mm Axle Nut Socket TRQ

This part replaces:

  • TRQ BHA84982
Part #: 1ASHS01188



TRQ
Brand #: BHA84982

How-to Video:

(09:02 min)