Replaces

Wheel Bearing & Hub Assembly TRQ BHA86488 - 1ASHS01267

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Wheel Bearing & Hub Assembly Features & Benefits:
      Direct Fit Replacement
      Precision Engineered
      Highest Quality Materials
  • Bearing Type:   Ball Bearing
  • Quantity:   4 Piece Set

 

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the wheel (0:51)
    • Pry off the hub cap.
    • Use your 34 mm socket and breaker bar to loosen the hub nut.
    • Loosen your lug nuts with a 19 mm socket and breaker bar.
    • Raise and secure your vehicle.
    • Remove the lug nuts and set the wheel aside.
  2. step : Remove the brakes (1:31)
    • Use your 15 mm socket to remove the bolts in the caliper bracket.
    • Use a screwdriver to compress the caliper piston.
    • Remove the caliper and tuck it up and out of the way.
    • Pry out the brake pads.
    • Remove two more 15 mm bolts to remove the caliper bracket.
    • Remove the rotor.
  3. step : Remove the Hub (4:11)
    • Hit the hub nut with penetrating oil, and remove it with your 34 mm socket.
    • Give your axle a solid tap with a hammer.
    • Remove the three bolts holding the hub to the steering knuckle.
    • Unplug the ABS sensor.
    • Remove the hub.
  4. step : Install the new hub. (6:58)
    • Plug in the ABS sensor lead.
    • Work the hub onto the axle and start your bolts.
    • Evenly tighten up the bolts, rotating through the three till they are tight enough to torque.
    • Torque the bolts to 60 ft lbs.
    • Put the hub nut on and tighten it preliminarily.
  5. step : Install the brakes (9:46)
    • Inspect your rotors and replace with new ones cleaned with brake parts cleaner if needed.
    • Use a wire brush to clean corrosion from the brake caliper bracket.
    • Bolt the bracket down with a ratchet and 15 mm socket and torque to 80 ft lbs.
    • Apply anti-seize grease to the edges of the brake pads and insert them into the caliper brackets.
    • Compress the calipers with a C-Clamp and mount it.
    • Feed the caliper bolts into place after inspecting and cleaning the bolt sleeves and torque them to 50 ft lbs.
  6. step : Put the wheel back on (13:50)
    • Hand tighten the lug nuts and lower the vehicle.
    • Torque the hub nut to 118 foot pounds.
    • Use a star pattern to torque the lug nuts to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands

  • Ratchets & Related

  • Torque Wrench
  • 1/2 Inch Breaker Bar
  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 34mm Socket
  • 19mm Socket
  • 15mm Socket

5.00/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
excellent product
i purchased a set of 4 wheel bearings and tie rods for my vehicle and they are awesome..they fit perfect and were easy to install..easier than taking off the old...videos that came along with the parts, via email, were very helpful in the process..thank you for the quick delivery and awesome price.
August 11, 2018
Good product.
The product came in on time and as described . I installed the hubs and the car runs great
August 14, 2018
Good product, good company
I ordered these bearings at the cheapest price I could find for all 4. Fast shipping as well. They even have videos for DIY options.
August 19, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Will these fit on a 2006 Monte Carlo?
Christine S July 11, 2018
No these will not fit on a 2006 Monte Carlo. Please search our website by first selecting your year, make and model, and then click the category "wheel bearing and hub assembly."
Tim K July 11, 2018
Will this fit a 2003 Monte Carlo SS 2003?
Corey W August 22, 2018
This part is specific to vehicles with a particular set of options and will only be compatible on models with ABS. If your vehicle was equipped with 4-wheel ABS then they would be correct for you. Thank you.
Jessica D August 22, 2018
?does this set work on my 2004 montana with brake shoes on the back and disk on the front
Reggie R October 12, 2018
Currently we do not carry this part for your vehicle. Were always updating our inventory so please check back soon! If you have any other questions, let us know.
Peter M October 13, 2018
Year Make Model Description
2004-2005Buick Century Buick Century with ABS Brakes Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set TRQ
1997-2004Buick Regal Buick Regal with ABS Brakes Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set TRQ
2000-2004Chevy Impala Chevy Impala with ABS Brakes Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set TRQ
2005Chevy Impala Chevy Impala with ABS Brakes & RPO Code JA9 (Heavy Duty Brakes) Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set TRQ
2005Chevy Impala Chevy Impala with ABS Brakes RPO Code JL9 (Power 4 Wheel ABS Disc Brakes) RPO Code JB9 (Light Duty Brakes) Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set TRQ
2000-2004Chevy Monte Carlo Chevy Monte Carlo with ABS Brakes Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set TRQ
2005Chevy Monte Carlo Chevy Monte Carlo with ABS Brakes & RPO Code JA9 (Heavy Duty Brakes) Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set TRQ
2005Chevy Monte Carlo Chevy Monte Carlo with ABS Brakes RPO Code JL9 (Power 4 Wheel ABS Disc Brakes) or RPO Code JB9 (Light Duty Brakes) Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set TRQ
2002-2005Chevy Venture Chevy Venture Front Wheel Drive with ABS Brakes Rear Disc Brakes Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set TRQ
1998-2002Oldsmobile Intrigue Olds Intrigue with ABS Brakes Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set TRQ
2001-2002Pontiac Aztek Pontiac Aztek Front Wheel Drive Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set TRQ
2003-2005Pontiac Aztek Pontiac Aztek Front Wheel Drive with ABS Brakes Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set TRQ
1997-2003Pontiac Grand Prix Pontiac Grand Prix with ABS Brakes Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set TRQ
2002-2005Pontiac Montana Pontiac Montana Front Wheel Drive with ABS Brakes Rear Disc Brakes Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set TRQ
Part #: 1ASHS01267


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

TRQ
Brand #: BHA86488

How-to Video:

(14:41 min)