Replaces

Wheel Bearing & Hub Assembly TRQ BHA54117 - 1ASHF00469

Specifications:

  • 3 Bolt Flange
  • Fits 5 Lug Wheel

Quality

  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both Bizrate.com and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
  • You don't want to be delayed by a defective part. 1A Auto wheel hub & bearings are all tested prior to shipping.

Fit Guaranteed

  • This hub & bearing will install just as your original does. You can use your existing hardware.
  • Save time and money with this direct fit hub bearing assembly. No trips to the auto parts store or extra time trying to match up and press bearings.
  • Hub installation is a degree more difficult than changing a tire on most vehicles.

Value

  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

BHA54117 Axle / Spindle Nut Torque Specification
  1. step : Removing the Wheel (0:25)
    • Pry out the center cap with a pick
    • Loosen the 35mm hub nut with a breaker bar
    • Loosen the 22mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Hub Nut (1:37)
    • Spray rust penetrant in the hub nut
    • Loosen the 35mm nut
    • Thread the nut on a few threads
    • Tap the nut with a mallet to loosen the axle
  3. step : Removing the Brakes (2:37)
    • Loosen the 14mm caliper bolts
    • Secure the caliper with a bungee cord
    • Remove the 18mm caliper bracket bolts
    • Remove the caliper bracket and the pads
    • Remove the T30 Torx bolt from the rotor
    • Remove the rotor
  4. step : Removing the ABS Sensor (4:25)
    • Remove the 10mm bolt from the ABS sensor
    • Remove the ABS sensor
  5. step : Removing the Hub (4:50)
    • Remove the three 13mm bolts from the hub
    • Tap the hub out from the knuckle
    • Remove the hub from the axle
  6. step : Installing the New Hub (7:06)
    • Clean any corrosion from the axle splines with brake cleaner and a wire brush
    • Apply anti-seize grease around the knuckle cavity
    • Slide the hub over the axle
    • Tighten the three 13mm bolts to the hub
    • Torque the bolts to 74 foot-pounds
  7. step : Reinstalling the ABS Sensor (9:17)
    • Insert the ABS sensor into place
    • Tighten the 10mm bolt to the ABS sensor
  8. step : Reinstalling the Axle Nut (9:51)
    • Thread the axle nut on by hand
    • Tighten the 35mm axle nut
  9. step : Installing the Caliper Bracket and Rotor (10:15)
    • Insert the rotor to the hub
    • Tighten the T30 Torx bolt to the rotor
    • Put the caliper bracket back into place
    • Start the 18mm bolts by hand
    • Tighten the bolts to 140 foot-pounds of torque
  10. step : Installing the Brake Caliper (11:17)
    • Press the metal clip to the brake pad
    • Put an old pad in the caliper
    • Apply grease to the brake pad tabs
    • Use a large C-clamp and the old pad to push the pistons back if needed
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Thread bolts by hand
    • Tighten the 14mm bolts to 20 foot-pounds
    • Clean the rotor with brake parts cleaner or mineral spirits
  11. step : Reattaching the Wheel (11:54)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 125 foot-pounds in a crossing or star pattern
    • Torque the hub nut to 151 foot-pounds
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Jack Stands
  • Rubber Mallet
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Brake Parts Cleaner
  • Paper Towels
  • Bungee Cord
  • Anti-Seize Grease

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • Swivel
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 35mm Socket
  • 14mm Socket
  • 18mm Socket
  • 10mm Socket

  • Torx Drivers & Sockets

  • T30 Torx Driver

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
0
0
0
0
Hub assembly wheel bearing.
A1 is great, good videos good parts. Would definitely use A1 Auto again. Thanks.
September 5, 2017
Purchased
6 months ago
Equinox Wheel Bearing
Came really fast and fit was perfect. Only a few miles on the hub but so far quiet working as should.
February 7, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(13:18 min)

Tools List:

    General Tools

  • Large C-Clamp
  • Jack Stands
  • Rubber Mallet
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Brake Parts Cleaner
  • Paper Towels
  • Bungee Cord
  • Anti-Seize Grease

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • Swivel
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 35mm Socket
  • 14mm Socket
  • 18mm Socket
  • 10mm Socket

  • Torx Drivers & Sockets

  • T30 Torx Driver



This part replaces:

  • Hollander 538-00223
  • OE # 13502886
  • OE # 13504972
  • TRQ BHA54117

Vehicle Fit

  • 2010 Buick Allure Wheel Bearing & Hub Assembly Front Driver or Passenger Side TRQ
  • 2010 Buick Allure Wheel Bearing & Hub Assembly Rear Driver or Passenger Side TRQ
  • 2010-2016 Buick LaCrosse Wheel Bearing & Hub Assembly Front Driver or Passenger Side TRQ
  • 2010-2016 Buick LaCrosse Wheel Bearing & Hub Assembly Rear Driver or Passenger Side TRQ
  • 2011-2016 Buick Regal Wheel Bearing & Hub Assembly Front Driver or Passenger Side TRQ
  • 2014-2016 Cadillac CTS All Wheel Drive Wheel Bearing & Hub Assembly Front Driver or Passenger Side TRQ
  • 2013-2016 Cadillac XTS Wheel Bearing & Hub Assembly Rear without Heavy Duty Brakes Driver or Passenger Side TRQ
  • 2013-2016 Cadillac XTS Wheel Bearing & Hub Assembly Front without Heavy Duty Brakes Driver or Passenger Side TRQ
  • 2010-2016 Chevy Equinox Wheel Bearing & Hub Assembly Front Driver or Passenger Side TRQ
  • 2014-2017 Chevy Impala Wheel Bearing & Hub Assembly Front Driver or Passenger Side TRQ
  • 2013-2016 Chevy Malibu Wheel Bearing & Hub Assembly Front Driver or Passenger Side TRQ
  • 2013-2016 Chevy Malibu Wheel Bearing & Hub Assembly Rear Driver or Passenger Side TRQ
  • 2010-2016 GMC Terrain Wheel Bearing & Hub Assembly Front Driver or Passenger Side TRQ
  • 2010-2011 Saab 9-5 Wheel Bearing & Hub Assembly Front Driver or Passenger Side TRQ
  • 2010-2011 Saab 9-5 Wheel Bearing & Hub Assembly Rear Driver or Passenger Side TRQ
Part #: 1ASHF00469

Ships Same Day for orders placed by 4 P.M. ET

TRQ
Brand #: BHA54117

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More