Replaces

Wheel Bearing & Hub Assembly TRQ BHA53986 - 1ASHF00134

Specifications:

  • Fits either LH (Driver Side) or RH (Passenger Side) FRONT
  • Direct replacement
  • Replaces dealer part numbers: 22701520
  • 3 Bolt Flange
  • Fits 4 Lug Wheel
  • New wheel studs already installed
  • Fits models without ABS (Anti-Lock Brakes)

Quality

  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both Bizrate.com and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
  • You don't want to be delayed by a defective part. 1A Auto wheel hub & bearings are all tested prior to shipping.

Fit Guaranteed

  • This hub & bearing will install just as your original does. You can use your existing hardware.
  • Save time and money with this direct fit hub bearing assembly. No trips to the auto parts store or extra time trying to match up and press bearings.
  • Hub installation is a degree more difficult than changing a tire on most vehicles.

Value

  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.
Precision Engineered

Precision Engineered using the highest grade SAE 1055 / 65Mn high carbon steel to exact OEM design.

100% Factory tested to precise OEM tolerances.

Highest Quality Materials

High quality, multi-lip seal reduces the intrusion of dirt and water, keeping grease clean for a longer bearing life.

Premium, heavy duty grease resists high temperature, moisture, and reduces intense friction pressure to help extend the life of the bearing.

Direct Fit Replacement

Direct fit replacement part is guaranteed to fit and function correctly for your specific application

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

BHA53986 Axle / Spindle Nut Torque Specification
  1. step : Removing the Wheel (1:04)
    • Loosen the caps and remove the wheel cover.
    • Remove the 30mm lug nut in the center of the wheel.
    • Loosen the other lug nuts.
    • Jack the car up and remove the lug nuts.
    • Pull the wheel off.
  2. step : Removing the Brakes (1:49)
    • Using a screwdriver pry the caliper from the rotor.
    • Remove the two 14mm bolts on the back of the caliper.
    • Pull the caliper off and set it aside.
    • Pry the pads off.
    • Remove the two 15mm bolts securing the caliper bracket (Use breaker bar or pipe for leverage).
    • Remove the caliper bracket.
    • Remove the rotor.
  3. step : Removing the Hub (3:10)
    • If the axel doesn't just push out hit it once with a hammer.
    • Remove the three bolts securing the hub.
    • Disconnect ABS harness if the vehicle has this.
    • Hit the side of the hub with a hammer to loosen it up.
    • Pull the hub free.
  4. step : Replacing the Hub (5:11)
    • Line the new hub with the back plate.
    • Reconnect the ABS harness if the vehicle has this.
    • Replace the three bolts that secure the hub. 70 – 75ft/lbs.
    • Replace the washer and nut on the hub.
  5. step : Replacing the Brakes (7:00)
    • Put the rotor in place and hold it on with one lug nut.
    • Put the caliper bracket back into place.
    • Replace the caliper bolts. 75 – 80 ft/lbs.
    • Put the brake pads back into place.
    • Replace the caliper and caliper bolts. Tighten to 20 – 22ft/lbs.
  6. step : Replace the Wheels (7:43)
    • Remove the lug nut.
    • Put the wheel into place.
    • Replace the lug nuts.
    • Lower the vehicle and tighten the lug nuts to 100ft/lbs.
    • Tighten the center nut to 155ft/lbs.
    • Replace the hub cap if this applies.
  7. step : Prepare the Brakes (8:37)
    • Pump the Brakes until they are firm before road testing.
    • Test stop from 5 then 10 mph.

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Hammer

  • Ratchets & Related

  • Socket Extensions
  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 15mm Socket
  • 30mm Socket
  • 18mm Socket
  • 16mm Socket
  • 17mm Socket
  • 14mm Socket
  • 19mm Socket

4.3 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
2
0
0
0
Wheel bearing hub
Part for like a glove, shipping was fast, and price was great!
April 9, 2018
Purchased
1 month ago
Request a % discount above 5%.
So far I am pleased with all the purchases. Send me a 25%+ discount and I'll be able to afford the r/f bearing and a right/front headlight assembally. Until future income. Thanks, KRP
December 5, 2017
Purchased
5 months ago
Wheel Bearing and Hub Assembly for a 2008 Chevy Cobalt
So far so good, the new part works exactly as it should. Had an issue with the original order, as it was defected. However, 1A Auto took care of it free of shipping and other charges. The new part was shipped and delivered the next day. I am satisfied with my new part and will continue to buy from 1A Auto.
August 21, 2017
Purchased
8 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2005-2009 Chevy Cobalt Front Wheel Bearing & Hub Assembly for Models with 4 Lug Wheels without ABS Brakes TRQ
  • 2007-2009 Pontiac G5 Front Wheel Bearing & Hub Assembly for Models with 4 Lug Wheels without ABS Brakes TRQ
  • 2005-2006 Pontiac Pursuit Front Wheel Bearing & Hub Assembly for Models with 4 Lug Wheels without ABS Brakes TRQ
  • 2003-2007 Saturn Ion Front Wheel Bearing & Hub Assembly for Models with 4 Lug Wheels without ABS Brakes TRQ

This part replaces:

  • Hollander 538-01602
  • OE # 22701520
  • TRQ BHA53986
Part #: 1ASHF00134

Ships Same Day for orders placed by 4 P.M. ET

TRQ
Brand #: BHA53986

How-to Video:

(09:02 min)