Replaces

Wheel Bearing & Hub Assembly TRQ BHA53958 - 1ASHF00096

Specifications:

  • Fits either LH (Driver Side) or RH (Passenger Side) FRONT
  • 3 Bolt Flange
  • Fits 5 Lug Wheel
  • Replaces dealer part numbers: 1F60-33-061, 3L54-1104-AA, 3L54-1104-AB, 3L5Z-1104-AA, 6L5Z-1104-B, 1F6033061, 3L541104AA, 3L541104AB, 3L5Z1104AA, 6L5Z1104B
  • Studs already installed
  • Includes ABS sensor and correct plug
  • Direct replacement
  • Built to strict quality control standards
  • Fits models with AWAL (All Wheel Anti-Lock Brakes) only

Note: Trucks with All Wheel ABS will have ABS sensors in the front hubs.

Precision Engineered:

From the highest grade SAE 1055 / 65Mn high carbon steel to exact OEM design.
100% Factory tested to precise OEM tolerances.

Highest Quality Materials:

High quality, multi-lip seal reduces the intrusion of dirt and water. Heavy duty grease resists high temperature, moisture, and reduces intense friction.

Direct Fit Replacement:

Guaranteed to fit and function correctly for your specific application.

Part Details

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

BHA53958 Axle / Spindle Nut Torque Specification

  1. step : Removing the Wheel (1:00)
    • Loosen the lug nuts with the vehicle on the ground
    • Remove the cotter pin from the axle nut if it has one
    • Loosen the axle nut
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (3:22)
    • Remove the bolts from the caliper bracket
    • Pull the caliper off
    • Put the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
  3. step : Removing the Brake Rotor (4:15)
    • Remove the two bolts from the caliper bracket
    • Pull off the brake caliper bracket
    • Remove a screw from the rotor if it has one
    • Strike the drum surface of the rotor with a hammer to loosen the rotor
    • Pull the rotor off
    • Clean the hub surface with a wire brush
  4. step : Removing the Hub Assembly (5:18)
    • Remove the axle bolt
    • Place a punch in the axle hole and hammer it to release the hub from the splines
    • Remove the bolts from the back of the hub
    • Remove the wheel hub and bearing
  5. step : Installing the Hub Assembly (7:53)
    • Insert the wheel hub into the spindle
    • Tighten the hub bolts
    • Reinstall the axle nut
  6. step : Installing the Brake Rotor (8:58)
    • Apply grease to the hub surface
    • Put the rotor onto the hub backwards
    • Spray the rear of the hub with brake cleaner
    • Pull off the brake rotor
    • Slide the brake rotor on
    • Spray the front of the rotor with brake cleaner
    • Put the caliper bracket into place
    • Insert the two into the caliper bracket
    • Torque the two bolts
  7. step : Installing the Brake Pads (9:48)
    • Put the brake pads into the caliper bracket
    • Apply grease to the back of the brake pads
    • Push back the caliper piston with grove lock pliers
    • Put the brake caliper into place
    • Insert the two bolts into the caliper
    • Torque the two bolts
  8. step : Reattaching the Wheel (11:01)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Torque the lug nuts in a crossing or star pattern
    • Torque the axle nut

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Chisel
  • Hammer

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • Complete Metric Socket Set

5.0 / 5.0
4 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
4
0
0
0
0
Great sale by seller! I would recommend this part as a good deal. 1A Auto is a great seller.
October 12, 2017
Purchased
11 months ago
worked well
was a easy install every thing was the same on the hub so it fit right in no problem
July 17, 2017
Purchased
1 year ago
we haven't had a chance to install this yet because of the weather but i'm sure we will be satisfied as uaual with the items we have ordered.
March 19, 2017
Purchased
1 year ago
All aspects of my order was an exceptional experience
This is my first order with 1A Auto. The order process was simple, a post order adjustment was expertly handling by staff. The part arrived on time and good condition. With the online video I was able to make the replacement within a few hours. With great pricing and quality parts I will be a repeat customer.
March 3, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2003 Ford Explorer Sport 4 Wheel Drive 4 Wheel ABS Brakes Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
  • 2003-2005 Ford Explorer Sport Trac 4 Wheel Drive 4 Wheel ABS Brakes Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
  • 2003-2009 Ford Ranger 4 Wheel Drive 4 Wheel ABS Brakes Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
  • 2010 Ford Ranger 4 Wheel Drive (Built Before 9/15/10 Production Date) 4 Wheel ABS Brakes Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
  • 2003-2009 Mazda B2300 Truck 4 Wheel Drive 4 Wheel ABS Brakes Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
  • 2003-2010 Mazda B3000 Truck 4 Wheel Drive 4 Wheel ABS Brakes Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
  • 2003-2009 Mazda B4000 Truck 4 Wheel Drive 4 Wheel ABS Brakes Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ

This part replaces:

  • Hollander 538-01673, 538-01620
  • OE # 6L5Z 1104 A 6L5Z 1104 B
  • TRQ BHA53958
Part #: 1ASHF00096


Order must be placed by 4pm ET
TRQ
Brand #: BHA53958

How-to Video:

(12:07 min)