Wheel Bearing & Hub Assembly TRQ BHA53951 - 1ASHF00085

This replacement wheel bearing & hub assembly is just what you need to get your vehicle in good working order again.


  • Fits either LH (Driver Side) or RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 12413005, 12413097, 12413098, 12413195, 12413196, 12413215, 12413216, 15178882, 88964096
  • Wheel studs already installed
  • Direct replacement
  • Built to strict quality control standards
  • Fits models WITHOUT Front Wheel ABS
NOTE: If your car has ABS you will see a light on the dash when you start your car. If there is no light, then your vehicle does not have ABS.

This wheel bearing & hub assembly is a great replacement and has good cost savings over a unit from the dealer.


  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
  • You don't want to be delayed by a defective part. 1A Auto wheel hub & bearings are all tested prior to shipping.

Fit Guaranteed

  • This hub & bearing will install just as your original does. You can use your existing hardware.
  • Save time and money with this direct fit hub bearing assembly. No trips to the auto parts store or extra time trying to match up and press bearings.
  • Hub installation is a degree more difficult than changing a tire on most vehicles.


  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.
Precision Engineered

From the highest grade SAE 1055 / 65Mn high carbon steel to exact OEM design.

100% Factory tested to precise OEM tolerances.

Highest Quality Materials

High quality, multi-lip seal reduces the intrusion of dirt and water. Heavy duty grease resists high temperature, moisture, and reduces intense friction.

Direct Fit Replacement

Guaranteed to fit and function correctly for your specific application.

Part Details

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

BHA53951 Axle / Spindle Nut Torque Specification

  1. step : Removing the Wheel (0:43)
    • Loosen the lug nut covers with a 19mm socket
    • Loosen the hub nut with a 35mm socket and a pipe for leverage
    • Leave the hub nut on for a few threads
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Caliper and Rotor (1:45)
    • Remove the hub nut
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Remove the 15mm bolts from the brake caliper
    • Pull the caliper up and off
    • Remove the 15mm bolts from the caliper bracket
    • Remove the caliper bracket
    • Remove the rotor
  3. When removing the 13mm bolts from the hub, do not damage the boot on the CV axle

  4. step : Removing the Hub (2:41)
    • Remove the three 13mm bolts on the back of the hub
    • Hammer on the side of the hub
    • Pull the hub off
  5. step : Installing the New Hub (3:30)
    • Put a 13mm bolt on the hub bracket
    • Insert the hub into place
    • Insert and tighten the 13mm bolts to the hub
    • Torque the 13mm bolts to 65 ft/lbs
  6. step : Installing the Rotor and Brake Caliper (4:28)
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
    • Put the bracket back into place
    • Start the 15mm bolts by hand and tighten them
    • Tighten the bolts to 85 ft/lbs of torque
    • Install the new brake pads into the bracket
    • Apply grease to the brake pad tabs
    • Insert the brake pad slides
    • Put the caliper on
    • Tighten the bolts to 75 foot-pounds
    • Replace the hub nut cap preliminarily
  7. step : Reattaching the Wheel (6:37)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the hub nut
    • Torque the hub nut to 159 ft/lbs
    • Tighten the lug nuts to 100 ft/lbs in a crossing or star pattern
    • Reattach the center cap
    • Tighten the lug nut covers with a 19mm socket
  8. step : Testing the Brakes (7:35)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Brake Fluid

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 15mm Socket
  • 19mm Socket
  • 35mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
I injoyed dealing with you business I got the right parts installed them with no difficulty my auto is out and running, well hope in future to use your services. Thank You
July 1, 2017
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 5 answers
Is any grease needed on the wheel hub bearing?
David R on Mar 29, 2018
BEST ANSWER: This part will bolt right on and function properly. It is already lubricated and sealed from the factory. Thank you!

Vehicle Fit

  • 2005-2008 Buick Allure Front Wheel Bearing & Hub Assembly without ABS Brakes TRQ
  • 2005 Buick Century Front Wheel Bearing & Hub Assembly without ABS Brakes TRQ
  • 2005-2008 Buick LaCrosse Front Wheel Bearing & Hub Assembly without ABS Brakes TRQ
  • 2006-2007 Buick Rendezvous Front Wheel Bearing & Hub Assembly without ABS Brakes TRQ
  • 2006-2008 Chevy Impala Front Wheel Bearing & Hub Assembly without ABS Brakes TRQ
  • 2006-2007 Chevy Monte Carlo Front Wheel Bearing & Hub Assembly without ABS Brakes TRQ
  • 2004-2008 Pontiac Grand Prix Front Wheel Bearing & Hub Assembly without ABS Brakes TRQ

This part replaces:

  • Hollander 538-01634 538-01722
  • OE # 88964096
  • TRQ BHA53951
Part #: 1ASHF00085

Brand #: BHA53951

How-to Video:

(08:03 min)