Replaces

Wheel Bearing & Hub Assembly TRQ BHA53914 - 1ASHF00039

Part Details

  • Wheel Bearing & Hub Assembly Features & Benefits:
    Direct Fit Replacement
    Precision Engineered
    Highest Quality Materials
  • Bearing Type: Ball Bearing

This replacement wheel bearing & hub assembly is just what you need to get your vehicle in good working order again.

Specifications:

  • Fits either LH (Driver Side) or RH (Passenger Side) FRONT
  • Includes 6 lug nut studs already installed, ABS Sensor, and ABS Sensor wire harness
  • 3 Bolt Flange
  • Direct replacement
  • Built to strict quality control standards

This wheel bearing & hub assembly is a great replacement and has good cost savings over a unit from the dealer.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

BHA53914 Axle / Spindle Nut Torque Specification

  1. step : Remove the wheel and tire (1:18)
    • Raise and secure the vehicle.
    • Remove the lug nuts and then the wheel.
  2. step : Remove Caliper (2:07)
    • Turn wheels all the way in the opposite direction of the side you are working on.
    • Use your 13mm socket wrench to remove the caliper bolts.
    • Use a wire tie to help prevent stress on the caliper.
    • Use your 18mm socket to remove the brackets.
  3. step : Remove brake disk (4:13)
    • Take care not to touch the disk, and if you do make sure to clean it with rubbing alcohol or mineral spirits.
  4. step : Remove Hub (4:42)
    • Use a 35mm socket to remove the hub nut.
    • Give the axle a slight tap with a hammer to loosen it.
    • Remove the 3 bolts securing the hub using your 18mm socket and extension and ratchet or breaker bar.
    • You can use penetrating oil to help.
    • Disconnect your ABS sensor.
    • Use a rubber mallet to break your hub free, and work around the flange with the hammer to pull it off.
    • Remove the hub and shield.
    • Clean up any corrosion with a wire brush.
  5. step : Install new hub (9:10)
    • Use some penetrating oil to prep the knuckle for the new hub.
    • Put the three 18 mm bolts in place and tighten the nuts to 90 ft lbs.
    • Reinstall the ABS harness.
    • Tighten but don't torque the lug nut.
  6. step : Put brakes and wheel back on (11:50)
    • Remember to replace the lug nuts on in a star pattern.
    • Lug nuts tighten to 100-120 ft lbs
    • Hub nut is 103 ft lbs.
    • Make sure to check your brakes and steering before driving again.
    • Make sure to pump the brakes and seat your rotors.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands
  • Large C-Clamp
  • Rubber Mallet
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Rust Penetrant
  • Wire Ties

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 18mm Socket
  • 19mm Socket
  • 35mm Socket

4.7 / 5.0
41 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
36
2
1
1
1
ALWAYS GOOD
AS USUAL, PRICING WAS GOOD, SHIPPING WAS PROMPT & FREE, AND THE QUALITY WAS GREAT. THE HOW TO VIDEO WAS EXTREMELY HELPFUL.
August 30, 2018
Purchased
1 month ago
Wheel Bearing-Hubs...
I have ordered several items from 1A over the last few years and they have never failed me. This recent order, Wheel Bearing-Hubs, included. I had never replaced the bearings before but along with the reasonable price, there is a video of how to. Nothing but praises for this company and their service.
August 17, 2018
Purchased
1 month ago
Hub Assembly
Perfect fit for my 2004 Envoy xuv the brand of the part TRQ perfect for I will recommend to use 1A Auto to get parts for any vehicles model.
August 12, 2018
Purchased
2 months ago
Very pleased with the part I ordered
Quick service, exactly the part I needed at a great price.
Thank you,

Debbie McClaughry
July 28, 2018
Purchased
2 months ago
1ASHF00039-Wheel Bearing & Hub Assembly
Great how to video. Parts fit perfect. Saved a lot of money doing the work myself
July 19, 2018
Purchased
2 months ago
Fast shipping
Came fast. Easy to install. Quality was that of the auto part store
May 13, 2018
Purchased
5 months ago
They fit perfectly no problems.
Wish there was a way to get faster as 9 days not good
May 9, 2018
Purchased
5 months ago
Great part
Easy to install,had no problems running ABS wire and bew clips were easy to put in. Just be careful when getting the old bearing out not to hit the threads when banging on bearing bolt
April 23, 2018
Purchased
6 months ago
Great!
The shipping was fast and the part was the right one. No problem at all. I will use 1a auto in the future. Thank you.
April 16, 2018
Purchased
6 months ago
The best
The videos on how to PROPERLY disassemble and reassemble makes you look like a garage wizard. The fear of making something worse or stranding the car in your driveway is relieved. Then, to perform the repair, the correct part can be ordered right then. Parts are cheaper the auto part stores that have no advice anymore. You guys are great.
April 10, 2018
Purchased
6 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 4 questions Browse 4 questions and 6 answers
Does this part work for 2WD vehicles?
Stephen E on Jun 25, 2017
BEST ANSWER: This bearing will only fit the front ,and the web site should call for another bearing for the rear.
will this work on rear wheel drive?
Jasmin E on Jun 13, 2017
BEST ANSWER: This hub will only fit the front of the vehicle.
Is this wheel hub for the 2wd or the 4wd?
Jose S on Jan 5, 2018
BEST ANSWER: Thanks for your question! These hubs will fit either 2 or 4 wheel drive models. Thanks!
Does this unit come with a new axle nut?
Stephen M on Nov 6, 2017
BEST ANSWER: No, you will need to either re use the existing axle nut or purchase from a separate vendor.

Vehicle Fit

Year Make Model Description
2004-2007Buick Rainier Buick Rainier Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
2003-2006Chevy SSR Chevy SSR Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
2002-2009Chevy Trailblazer Chevy Trailblazer Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
2002-2006Chevy Trailblazer EXT Chevy Trailblazer EXT Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
2002-2009GMC Envoy GMC Envoy Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
2002-2006GMC Envoy XL GMC Envoy XL Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
2004-2005GMC Envoy XUV GMC Envoy XUV Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
2003-2008Isuzu Ascender Isuzu Ascender Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
2002-2004Oldsmobile Bravada Olds Bravada Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
2005-2009Saab 9-7X Saab 9-7X Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ

This part replaces:

  • Hollander 538-01587
  • TRQ BHA53914
  • OE # 15130858
  • OE # 12413037
Part #: 1ASHF00039


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

TRQ
Brand #: BHA53914

How-to Video:

(13:45 min)