Replaces

Wheel Bearing & Hub Assembly TRQ BHA53888 - 1ASHF00001

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Wheel Bearing & Hub Assembly Features & Benefits:
      Direct Fit Replacement
      Precision Engineered
      Highest Quality Materials
  • Bearing Type:   Ball Bearing

This replacement front hub and bearing assembly is just what you need to get your vehicle in good working order again!

Specifications:

  • Fits either LH (Driver Side) or RH (Passenger Side) FRONT
  • 3 Bolt Flange (Bolts to Steering Knuckle with 3 Bolts)
  • Fits 5 Lug Wheel
  • Wheel Mounting Studs already installed
  • Includes ABS Sensor and Plug Wire

Note: For the 2004-05 Malibu Classic requiring a VIN (Vehicle Identification Number), please match the 4th digit of your VIN number to the VIN code on your title. Your vehicles VIN number can be found in the lower left corner of the windshield or on your registration.

This hub and bearing assembly is a great replacement and has good cost savings over a dealer unit.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

BHA53888 Axle / Spindle Nut Torque Specification

  1. step : Removing the Wheel (1:18)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Remove the 35mm hub nut
    • Pull off the wheel
  2. step : Removing the Brake Caliper (1:50)
    • Remove the two 13mm bolts from the caliper
    • Pry off the caliper
    • Remove the brake rotor
  3. step : Removing the Hub (3:26)
    • Remove the three bolts that hold in the hub
    • Disconnect the ABS sensor if you have one
    • Reach in behind and remove the clip holding the hub
    • For the center, use a large axle nut socket
    • Once the center bolt is removed, simply pull the hub off the axle shaft
    • If it doesn't come off, you'll need an axle puller or a gear puller. Do not use a hammer
  4. step : Installing the Hub (9:26)
    • Once the new hub is ready, place it into position on the axle shaft
    • Take the original bolts and reattach the hub
  5. step : Step 5: Replacing the hub (9:26)
    • Once the new hub is ready, place it into position on the axle shaft.
    • Take the original bolts and reattach the hub.

Tools needed for replacement:

    Air Powered Tools

  • 3/8 Inch Air Impact Gun

  • General Tools

  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 19mm Socket
  • 35mm Socket

5.00/ 5.0
7 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
7
0
0
0
0
Just what I needed
Quality of Hub Assembly seemed great. Easy swap out of old one. Video was very helpful, too! Ive never done one before so it took me about an hour and a half from start to finish.
October 1, 2015
Works just like a wheel bearing
Whats to say, its a wheel bearing. Mount it up and it spins without grumbling and moaning like the old one. Time will tell how good it is but I see no issues.
June 21, 2017
Good part for a great price
Came when promised (faster shipping is way too expensive on this site). Easily installed and just works.
August 7, 2017
Hub assembly
hub assembly worked out fine lets see how long it lasts as of now it is good hope it stays that way have a good day
March 3, 2018
Great experience
I was so happy with the low prices!! My parts came on the exact day the email said they would. The parts where great n easy to install. I dnt like to shop or put my personal infomation online. This is the first website that I have ever bought auto parts from n it definitely wont b my last time purchasing parts through ur website. I have recommended this website to a few people. Thank u again for a positive experience!!!
April 3, 2018
1A Auto
The wheel bearing and hub assembly for my 2004 Pontiac grand am is a high quality part Ive put 1000 miles so for on the wheel bearing and Ive had no problems. This is the 4th purchase Ive made from 1A Auto on different parts for my grand am,and couldnt be happier from looking up a part to the customer service ,to the shipping every aspect of the company is 5 stars. Its hard to find a auto parts dealer thats compares to 1A Auto. Ive wouldnt hesitate to recommend 1A Auto for all your car parts, and one more thing its hard to beat their prices. Rodney from Poplar Bluff, Mo.
August 11, 2018
Used on a 2000 Pontiac Grand Am SE
Fast shipping and well packaged from 1A Auto, Part fit and works good so far. Build quality appears to be good. ABS and Traction lights are off now (Service Soon Light). Mine had a bad/open circuit code do to sensor built in hub.
October 21, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2004-2005Chevy Classic Chevy Classic Front Wheel Bearing & Hub Assembly for Models with ABS Brakes TRQ
1997-2003Chevy Malibu Chevy Malibu Front Wheel Bearing & Hub Assembly for Models with ABS Brakes TRQ
1999-2004Oldsmobile Alero Olds Alero Front Wheel Bearing & Hub Assembly TRQ
1997-1999Oldsmobile Cutlass Olds Cutlass Front Wheel Bearing & Hub Assembly (excluding Supreme Models) TRQ
1999-2005Pontiac Grand Am Pontiac Grand Am Front Wheel Bearing & Hub Assembly TRQ
Part #: 1ASHF00001


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

TRQ
Brand #: BHA53888

How-to Video:

(10:00 min)