Replaces

Wheel Bearing & Hub Assembly TRQ BHA53786 - 1ASHS00929

Specifications:

  • Comes as a Set of 4
  • Includes LH (Driver Side) & RH (Passenger Side) Front & Rear
  • Direct replacement
  • Front 3 Bolt triangular flange
  • Rear 4 bolt rectangular flange
  • Fits 5 Lug Wheel
  • Studs already installed
  • Built to strict quality control standards
  • Has ABS sensor built in with correct plug configuration

Quality

  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both Bizrate.com and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
  • You don't want to be delayed by a defective part. 1A Auto wheel hubs & bearings are all tested prior to shipping.

Fit Guaranteed

  • These hub & bearing sets will install just as your originals do. You can use your existing hardware.
  • Save time and money with direct fit hub bearing assemblies. No trips to the auto parts store or extra time trying to match up and press bearings.
  • Hub installation is a degree more difficult than changing a tire on most vehicles.

Value

  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.
Precision Engineered

Precision Engineered using the highest grade SAE 1055 / 65Mn high carbon steel to exact OEM design.

100% Factory tested to precise OEM tolerances.

Highest Quality Materials

High quality, multi-lip seal reduces the intrusion of dirt and water, keeping grease clean for a longer bearing life.

Premium, heavy duty grease resists high temperature, moisture, and reduces intense friction pressure to help extend the life of the bearing.

Direct Fit Replacement

Direct fit replacement part is guaranteed to fit and function correctly for your specific application

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Step 1: Removing the Wheel (0:54)
    • Use a 19mm socket to remove the plastic covers.
    • Remove the wheel cover.
    • Loosen the all the lug nuts while wheel is on the ground.
    • Once the car is jacked up remove all the lug nuts and pull the wheel free.
  2. step : Step 2: Removing the Brakes (1:37)
    • Remove the two 14mm bolts on the back of the caliper
    • Place a screwdriver into the whole on the caliper and pry the pads out.
    • Remove the caliper and pads.
    • Remove the two 15mm bolts on the caliper bracket.
    • Pull the bracket free.
    • Pull rotor off.
    • Pull the tab on the ABS harness and pull the harness free.
  3. step : Step 3:Removing the Rotor and Hub (4:01)
    • Hit the axel with a hammer. If it moves you are all set. If it doesn't you need an axel puller.
    • Remove the three screws on the back of the hub. Use a pipe for extra leverage.
    • Hammer the hub from side to side, up and down, until it loosens and can be pulled free.
    • Remove the hub and backing plate.
    • Use a wire brush to clean the bracket.
    • Spray with penetrating oil.
  4. step : Step 4: Replacing the Hub Assembly (7:09)
    • Replace the backing plate.
    • Run the connecter up and through.
    • Line up the hub and push into place. Put the bolts through.
    • Reconnect the ABS.
    • Tighten the three hub bolts to 65ft/lbs.
    • Slide on the rotor. And replace one nut to secure it.
    • Replace the caliper bracket and bolts. Tighten to 85ft/lbs.
    • Put the brake pads into place.
    • Replace the caliper and the two bolts to secure it. Tighten to 35ft/lbs.
    • Remove the nut from the rotor.
  5. step : Step 5: Replace the Wheel (11:11)
    • Put the wheel into place.
    • Replace the lug nuts.
    • Lower the vehicle.
    • Tighten the lug nuts in a star pattern to 100ft/lbs.
    • Tighten the center lug nut to 159ft/lbs.
    • Replace the wheel cover.
    • Use a socket to replace the retainers.
    • Pump your brakes until they are firm.

Tools needed for replacement:

    General Tools

  • Wire Brush
  • Jack Stands
  • Hammer

  • Ratchets & Related

  • Ratchet
  • Socket Extensions
  • 1/2 Inch Breaker Bar
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 15mm Socket
  • 14mm Socket
  • 19mm Socket
  • 13mm Socket
  • 35mm Socket

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
0
0
0
0
Hub assembly for 2008 Malibu. Awesome that they are sold as a kit. Don't have to purchase individually
Parts were exactly what I needed. Great quality and cheaper than going to my local auto parts. Would definitely recommend it.
March 1, 2017
Purchased
1 year ago
Wheel bearing and Hub Assembly for 2009 Malibu
Thanks the parts were very affordable it works fine and it fits perfect. I will be ordering again in the near future. Thanks so much guys!

Darius Charles from Lafayette,LA
February 14, 2018
Purchased
2 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
Who makes these bearings?
Lane C on Sep 29, 2016
BEST ANSWER: We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle. If you have any further questions, please don't hesitate to ask.

Vehicle Fit

  • 2008-2010 Chevy Cobalt SS Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set for 5 Lug Wheels with Rear Disc Brakes & 4 Wheel ABS Brakes TRQ
  • 2008-2010 Chevy HHR SS Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set TRQ
  • 2004-2005 Chevy Malibu New Body Style Wheel Bearing & Hub Assembly for Models with 4 Wheel ABS Brakes (4th Vin Digit Z) Front & Rear 4 Piece Set TRQ
  • 2006-2007 Chevy Malibu Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set for Models with 4 Wheel ABS Brakes TRQ
  • 2008-2012 Chevy Malibu Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set TRQ
  • 2006-2007 Chevy Malibu Maxx Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set for Models with 4 Wheel ABS Brakes TRQ
  • 2005-2010 Pontiac G6 Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set for Models with 4 Wheel ABS Brakes TRQ
  • 2007-2009 Saturn Aura Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set for Models with 4 Wheel ABS Brakes TRQ

This part replaces:

  • TRQ BHA53786
Part #: 1ASHS00929


TRQ
Brand #: BHA53786

How-to Video:

(12:29 min)