Replaces

Wheel Bearing & Hub Assembly TRQ BHA53660 - 1ASHS00619

These replacement wheel hub & bearing assemblies are just what you need to get your vehicle in good working order again.

Specifications:

  • Comes as a SET of 4
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT & REAR
  • Replaces dealer part numbers: 7470017, 7470105, 7470143, 7470555, 7470567, 7470568, 12429204
  • Wheel studs already included and installed!
  • Have ABS sensors w/stainless steel sensor wire clips
  • Direct replacements
  • Built to strict quality control standards

It is very important when installing to tighten the Front Hub Nut to 118 foot lbs. Failure to use the correct torque specifications will result in premature failure of the hub.

NOTE: For 2001 Models: Replaces hub assemblies with Stainless Steel Sensor Wire Clips. Do not replace hub assemblies with Plastic Clips.

Precision Engineered:

From the highest grade SAE 1055 / 65Mn high carbon steel to exact OEM design.
100% Factory tested to precise OEM tolerances.

Highest Quality Materials:

High quality, multi-lip seal reduces the intrusion of dirt and water. Heavy duty grease resists high temperature, moisture, and reduces intense friction.

Direct Fit Replacement:

Guaranteed to fit and function correctly for your specific application.

Part Details

  • Quantity: 4 Piece Set

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the wheel and tire (1:30)
    • Raise and secure the vehicle.
    • Remove the lug nuts and then the wheel.
  2. step : Remove Caliper (2:00)
    • Turn wheels all the way in the opposite direction of the side you are working on.
    • Use your 15mm socket wrench to remove the caliper bolts.
    • Use a wire tie to help prevent stress on the caliper.
  3. step : Remove brake disk (2:44)
    • Take care not to touch the disk, and if you do make sure to clean it with rubbing alcohol or mineral spirits.
  4. step : Remove Hub (2:56)
    • Remove the 3 bolts securing the hub using your 13mm socket and 3/8 extension and ratchet or breaker bar.
    • You can use penetrating oil to help.
    • Use a 35mm socket to remove the hub nut.
    • Give the axle a slight tap with a hammer to loosen it.
    • Use a rubber mallet to break it free, and work around the flange with the hammer to pull it off.
    • Leave the top 13mm loosely still in to prevent the hub from flying out if you hit it too hard.
    • Remove the hub, using driving tools to help work it out of the steering knuckle.
    • Clean up any corrosion with a wire brush.
  5. step : Install new hub (8:30)
    • Use some penetrating oil to prep the knuckle for the new hub.
    • Watch part 2 to install your new 1A Auto hub!

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands
  • Rubber Mallet

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 19mm Socket
  • 32mm Socket
  • 35mm Socket

5.0 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
3
0
0
0
0
Product review
My products were delivered in a Timely manner and were ready for instillation when they arrived i even was able to watch a video of exact instillation directions for my exact vehicle . this place rocks as far as getting parts goes and very reasonable on prices compared to having a shop do the work i saved almost $400 doing it myself.
April 20, 2018
Purchased
4 months ago
Hub assembly review
I was really nervious about ordering parts over the internet wondering if something is wrong it would take forever trying to get a refund or replacement.

Well it happened. One of the front wheel hub had a broken ABS plug. So i phoned 1A Auto and the customer service was excellent. The young lady appologized and she shipped me out a new part.

They went in pretty easily after viewing the video showing me how to do it.

I have since placed several more orders with them without an issue.

Thanks 1A Auto!
March 18, 2018
Purchased
5 months ago
Fast delivery, awesome price.
Fast delivery, awesome price.'Fast delivery, awesome price.Fast delivery, awesome price.
November 4, 2017
Purchased
9 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 5 questions Browse 5 questions and 5 answers
Will these work on a 2001 cadillac deville dhs?
Steven A on Dec 24, 2017
BEST ANSWER: Yes, as long as your Deville DHS has the RPO code JL9.
I accidentally ordered wheel bearing hub assemblies for a 2005 cadillac deville, the car is actually a 2002, are they the same part or will I need to replace them?
Jason B on Aug 27, 2017
BEST ANSWER: They should be the same as long as you have RPO code JL9! Your RPO codes can usually be located in the glove box.
Will thesewill these front and rear hub assembly replace one hubs on a 2001 Cadillac sls?
Rocky B on Jun 3, 2017
BEST ANSWER: Unfortunately they will not fit your 2001 SLS.
Do these Wheel Bearing & Hub Assembly Front Rear replace OEM parts on a 2002 Cadillac Deville DTS?
Aubrey O on Nov 7, 2015
BEST ANSWER: Cataloging says, yes. I replaced them on a 2000 Cadillac Deville base model. These hubs work great and are easily installed. I'm a very happy customer of 1A Auto. I use them every chance i can and recommend them all the time.
Will they fit 2001 Cadillac sls?
Rocky B on Jun 3, 2017

Vehicle Fit

Year Make Model Description
2000-2005Buick LeSabre Buick LeSabre Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set for Models with ABS Brakes TRQ
1997-2005Buick Park Avenue Buick Park Avenue Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set for Models with ABS Brakes TRQ
1997-1999Buick Riviera Buick Riviera Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set for Models with ABS Brakes TRQ
2000Cadillac Deville Cadillac Deville Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set for Models with ABS Brakes RPO Code JL9 (Power 4 Wheel ABS Disc Brakes) TRQ
2001-2005Cadillac Deville Cadillac Deville Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set for Models with ABS Brakes RPO Code JL9 (Power 4 Wheel ABS Disc Brakes) TRQ
1997-1999Oldsmobile Aurora Olds Aurora Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set for Models with ABS Brakes TRQ
2001-2003Oldsmobile Aurora Olds Aurora Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set for Models with ABS Brakes TRQ
2000-2005Pontiac Bonneville Pontiac Bonneville Front & Rear Wheel Bearing & Hub Assembly 4 Piece Set for Models with ABS Brakes TRQ

This part replaces:

  • TRQ BHA53660
Part #: 1ASHS00619


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

TRQ
Brand #: BHA53660

How-to Video:

(09:37 min)