Replaces

Wheel Bearing & Hub Assembly TRQ BHA53490 - 1ASHS00349

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 15109023, 15109024, 15881888, 15881889, 15910968, 20835869, 25964540
  • Direct replacements
  • 4 Bolt Triangular Flanges
  • Fits 8 lug wheels
  • New wheel studs already installed
  • ABS (Anti Lock Brakes) Sensors are included
  • Fit New Body Style Models
  • Fit both 2WD & 4WD HD Heavy Duty Models

Note: For 2007 truck models, the Classic Style has a crease down the center of the door skin where on the new body styles, the door skin is smooth. This hub is for the New Body Style Models.

Quality

  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both Bizrate.com and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
  • You don't want to be delayed by a defective part. 1A Auto wheel hubs & bearings are all tested prior to shipping.

Fit Guaranteed

  • These hub & bearing sets will install just as your originals do. You can use your existing hardware.
  • Save time and money with direct fit hub bearing assemblies. No trips to the auto parts store or extra time trying to match up and press bearings.
  • Hub installation is a degree more difficult than changing a tire on most vehicles.

Value

  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

BHA54004 Axle / Spindle Nut Torque Specification
  1. step : Removing the Wheel (1:05)
    • Pry off the center cap with a flat blade screwdriver
    • Remove the hub nut cover with a hammer and chisel
    • Remove the hub nut with a 36mm socket and a breaker bar or a ratchet with pipe for leverage
    • Make sure the axle moves freely
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (2:05)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
    • Check for gouges on both sides of the rotor
  3. step : Removing the Brake Caliper and Pads (2:29)
    • Remove the two 19mm bolts from the brake caliper
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
    • Remove the brake pad slides
  4. step : Removing the Brake Caliper Bracket and Rotor (3:22)
    • Remove the two 18mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Remove the T30 Torx screw from the brake rotor
    • Pull the rotor off by hand
    • If the rotor will not come off by hand, apply penetrating oil to the studs
    • Tighten M10 bolts into the rotor to press it off
  5. step : Removing the Hub (4:35)
    • Apply penetrating oil to the hub bolts
    • Remove two of the three 15mm bolts from the hub mount
    • Loosen the third 15mm bolt
    • Use a hammer to loosen up the hub
    • Disconnect the ABS sensor wiring harness near the chassis
    • Remove the third 13mm bolt
    • Pull off the hub and backing plate
    • Disconnect the ABS sensor wiring harness at the hub
  6. step : Installing the New Hub (6:44)
    • Clean the steering knuckle with a wire brush
    • Apply white grease to the hub flange
    • Push the hub through the backing plate and on to the steering knuckle
    • Start the three 15mm bolts by hand
    • Tighten the 15mm bolts to 133 foot-pounds of torque
    • Route and reconnect the abs sensor wire at both ends
  7. step : Reinstalling the Brake Caliper Bracket and Rotor (8:25)
    • Slide the rotor into place
    • Thread one lug nut to hold the rotor in place
    • Put the brake caliper bracket into place
    • Start the 18mm bolts by hand
    • Tighten the 18mm bolts to 100 foot-pounds
  8. step : Reinstalling the Brake Caliper and Pads (9:06)
    • Apply white grease to the brake pads
    • Clean the rotor with brake parts cleaner or mineral spirits
    • Install the new brake pads into the bracket
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Put the caliper on
    • Thread bolts by hand
    • Tighten bolts to 50 foot-pounds
    • Remove the placeholder lug nut
  9. step : Reattaching the Wheel (11:00)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Put on the hub nut
    • Tighten the hub nut to 156 foot-pounds
    • Tighten the lug nuts to between 100-110 foot-pounds in a crossing or star pattern
    • Reattach the center cap, inserting the tongue into the wheel groove
  10. step : Testing the Brakes (11:36)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Chisel
  • Floor Jack
  • Hammer
  • Large C-Clamp

  • Materials, Fluids, and Supplies

  • Brake Parts Cleaner
  • M10 x 7cm bolts
  • Mineral Spirits
  • Rust Penetrant
  • White Grease

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 15mm Socket
  • 18mm Socket
  • 19mm Socket
  • 36mm Socket

  • Torx Drivers & Sockets

  • T30 Torx Driver

5.0 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
3
0
0
0
0
Wheel bearing & hub assembly
I would recommend these hub assemblies for any one that needs to replace the wheel bearings in their 2010 Chevy crew can 2500HD 4x4. It is just as easy as taking, the large axle bolt off then 4 bolts that hold the hub on. Then just unplug the ABS sensor and slid off. Yep that easy.
March 24, 2017
Purchased
11 months ago
Parts were shipped quick and everything fit perfect. Plus the step by step video helped the install go smooth with no issues plus a few tips I never thought of. Thanks for the great service and price.
June 20, 2017
Purchased
8 months ago
Quality product for killer deal
Local auto parts stores wanted $250+ for 1 hub assembly (abs sensor separate), found 1aauto and purchased 2 hub assemblies for $110 (with abs sensor), super fast shipping UPS did an excellent job at making contact and holding order at warehouse when my package was refused for delivery at USPS address (live in a rural area) will definitely make more purchases in near future ((also install videos and recommend tools list was a huge help))
December 28, 2017
Purchased
2 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 9 answers
Is this hub assembly good to use if the truck is a diesel?
Tom B on Apr 12, 2016
BEST ANSWER: I bought these hubs for my 08 GMC Sierra 2500 diesel back in November. They are a direct replacement and tough. I work in the oil field and drive down bad lease roads everyday and they have held up well.

How-to Video:

(12:01 min)

Tools List:

    General Tools

  • Chisel
  • Floor Jack
  • Hammer
  • Large C-Clamp

  • Materials, Fluids, and Supplies

  • Brake Parts Cleaner
  • M10 x 7cm bolts
  • Mineral Spirits
  • Rust Penetrant
  • White Grease

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 15mm Socket
  • 18mm Socket
  • 19mm Socket
  • 36mm Socket

  • Torx Drivers & Sockets

  • T30 Torx Driver



This part replaces:

  • TRQ BHA53490

Vehicle Fit

  • 2007 Chevy Silverado 2500 HD New Body Style Front Wheel Bearing & Hub Assembly Pair TRQ
  • 2008-2010 Chevy Silverado 2500 HD Front Wheel Bearing & Hub Assembly Pair TRQ
  • 2007 Chevy Silverado 3500 New Body Style Single Rear Wheels (SRW) Front Wheel Bearing & Hub Assembly Pair TRQ
  • 2008-2010 Chevy Silverado 3500 Single Rear Wheels (SRW) Front Wheel Bearing & Hub Assembly Pair TRQ
  • 2007-2010 Chevy Suburban 2500 Front Wheel Bearing & Hub Assembly Pair TRQ
  • 2007 GMC Sierra 2500 HD New Body Style Front Wheel Bearing & Hub Assembly Pair TRQ
  • 2008-2010 GMC Sierra 2500 HD Front Wheel Bearing & Hub Assembly Pair TRQ
  • 2007 GMC Sierra 3500 New Body Style Single Rear Wheels (SRW) Front Wheel Bearing & Hub Assembly Pair TRQ
  • 2008-2010 GMC Sierra 3500 Single Rear Wheels (SRW) Front Wheel Bearing & Hub Assembly Pair TRQ
  • 2007-2010 GMC Yukon XL 2500 Front Wheel Bearing & Hub Assembly Pair TRQ
  • 2008-2009 Hummer H2 Front Wheel Bearing & Hub Assembly Pair TRQ
Part #: 1ASHS00349

Ships Same Day for orders placed by 4 P.M. ET

TRQ
Brand #: BHA53490

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More