Replaces

Wheel Bearing & Hub Assembly TRQ BHA53483 - 1ASHS00340

Part Details

  • Wheel Bearing & Hub Assembly Features & Benefits:
    Direct Fit Replacement
    Precision Engineered
    Highest Quality Materials
  • Bearing Type: Ball Bearing

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 15793213, 12413083, 12413084, 12413166, 12413274, 21995732, 22706967, 7467651, 7467687
  • Direct replacements
  • 3 Bolt Triangular Flanges
  • Fits 5 lug wheels
  • New wheel studs already installed
  • Fit models with ABS (Anti Lock Brakes)

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

BHA54001 Axle / Spindle Nut Torque Specification

  1. step : Removing the Wheel (0:54)
    • Use a 19mm socket to remove the plastic covers.
    • Remove the wheel cover.
    • Loosen the all the lug nuts while wheel is on the ground.
    • Once the car is jacked up remove all the lug nuts and pull the wheel free.
  2. step : Removing the Brakes (1:37)
    • Remove the two 14mm bolts on the back of the caliper
    • Place a screwdriver into the whole on the caliper and pry the pads out.
    • Remove the caliper and pads.
    • Remove the two 15mm bolts on the caliper bracket.
    • Pull the bracket free.
    • Pull rotor off.
    • Pull the tab on the ABS harness and pull the harness free.
  3. step : Removing the Rotor and Hub (4:01)
    • Hit the axel with a hammer. If it moves you are all set. If it doesn't you need an axel puller.
    • Remove the three screws on the back of the hub. Use a pipe for extra leverage.
    • Hammer the hub from side to side, up and down, until it loosens and can be pulled free.
    • Remove the hub and backing plate.
    • Use a wire brush to clean the bracket.
    • Spray with penetrating oil.
  4. step : Replacing the Hub Assembly (7:09)
    • Replace the backing plate.
    • Run the connecter up and through.
    • Line up the hub and push into place. Put the bolts through.
    • Reconnect the ABS.
    • Tighten the three hub bolts to 65ft/lbs.
    • Slide on the rotor. And replace one nut to secure it.
    • Replace the caliper bracket and bolts. Tighten to 85ft/lbs.
    • Put the brake pads into place.
    • Replace the caliper and the two bolts to secure it. Tighten to 35ft/lbs.
    • Remove the nut from the rotor.
  5. step : Replacing the Wheel (11:11)
    • Put the wheel into place.
    • Replace the lug nuts.
    • Lower the vehicle.
    • Tighten the lug nuts in a star pattern to 100ft/lbs.
    • Tighten the center lug nut to 159ft/lbs.
    • Replace the wheel cover.
    • Use a socket to replace the retainers.
    • Pump your brakes until they are firm.

Tools needed for replacement:

    General Tools

  • Wire Brush
  • Jack Stands
  • Hammer

  • Ratchets & Related

  • Ratchet
  • Socket Extensions
  • 1/2 Inch Breaker Bar
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 15mm Socket
  • 14mm Socket
  • 19mm Socket
  • 13mm Socket
  • 35mm Socket

4.9 / 5.0
33 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
30
3
0
0
0
Good service
Parts like described, received when said I would get them. Would buy from again.
August 30, 2018
Purchased
1 month ago
Mixup but still satisfied
So bit of a long story but ill try to keep it short.

I made a mistake and ordered the wrong year of wheel hubs for my car. Although the part was not correct 1A Auto did a fantastic job of handling my return. Responses were very quick, there was no issue with payment back, and they still made sure I was treated well despite my error. The parts (even though I didn't install them) were still higher quality for a fraction of the price. I was very happy with how 1A Auto treated me and how well they handled everything I threw at them.

Would highly recommend.
August 20, 2018
Purchased
1 month ago
Great product at a great price
The product fit perfectly. Bolt holes were exact. Easy to install will the right tools.
August 19, 2018
Purchased
1 month ago
Wheel bearing replacement
I was having a front passenger side wheel bearing problem with my 2011 Chevy Malibu. I ordered a pair and replaced both front wheel bearings. The price was very good and shipping was very fast! However one of the new bearings had a problem with the sensor. I contacted a representative who was very helpful. He sent out new one right away! I installed the new one and all is good! Thanks 1aauto!
July 16, 2018
Purchased
2 months ago
Works great
I recommend these wheel bearings! They work just as well as the ones from autozone and are 1/3 the price.
June 17, 2018
Purchased
3 months ago
Good part and good price
I installed these hubs within a month ago and so far so good. They came with a protective plastic piece around the abs area that protects the product during shipping which was a nice addition. The studs had nearly torn through the box they were shipped in though. The product looked pretty quality and is performing well. Overall I would recommend it.
May 28, 2018
Purchased
4 months ago
Front hubs, rotors, and brake pads.
Went shopping online for these products with A1 Auto having the best combo deals for my 2011 Malibu. The parts came pretty quick and were all I needed. Thanks A1 Auto for a good shopping experience.
May 8, 2018
Purchased
5 months ago
Awesome price
Seems to be just as good as a moog bearing for ¼ of the price.
May 6, 2018
Purchased
5 months ago
Happy Customer
I was very pleased with the pricing of the parts I ordered! I will be returning to this site for future purchases. Parts were packaged neatly & it didn’t take too long to receive them!
April 26, 2018
Purchased
5 months ago
Great deal!
Great fix no issues with BAD light staying on 1/4 of the price gm wanted! Very happy
April 20, 2018
Purchased
5 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 8 questions Browse 8 questions and 11 answers
Hello. What brand are these wheel hubs? Thank you.
Zach W on Apr 27, 2016
BEST ANSWER: We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle and are covered by a 2 year warranty. If you have any further questions, please don't hesitate to ask.
Will this work with traction control?
David B on Sep 21, 2017
BEST ANSWER: If does, but you have to make sure to hook everything back up. Mine has shown the traction light since we changed it because it didn't get plugged back in correctly.
Installed the new ones ABS light and traction light on dash now... all plugs are snug and clicked in??
Matt S on Dec 1, 2017
BEST ANSWER: When you hook up a OBD II scanner to the vehicle, what is the code number or code numbers which populate so we may further investigate?
Do you have to grease these bearings?
Will b on Oct 28, 2017
BEST ANSWER: No you do not need to grease these bearings. They are pregreased and ready to install!
This is for the pair right?
Eric S on Sep 20, 2017
BEST ANSWER: Yes, you will receive a pair of the hub and bearing assemblies with this part number.
Does this fit a cobalt lt wheel bearing for a cobalt ss?
Linda H on Jul 29, 2017
BEST ANSWER: No, these will only fit the SS model Cobalt.
Will they fit a GT?
Mike D on Mar 22, 2017
BEST ANSWER: There are no exclusions for the GT model. As long as the 5 lug wheel and models with ABS specifications match our year, make and model options you will have no issues installing these parts.
Hello I have a 2006 Chevy malibu Ls its a 4 Cylinder. I want to make sure these parts will fit on my car before purchasing. And this also comes with both right and left wheel bearing correct?
Rissa on Jan 30, 2017

Vehicle Fit

Year Make Model Description
2008-2010Chevy Cobalt Chevy Cobalt SS Front Wheel Bearing & Hub Assembly for Models with 5 Lug Wheels Pair TRQ
2008-2010Chevy HHR Chevy HHR SS Front Wheel Bearing & Hub Assembly for Models with Rear Disc Brakes Pair TRQ
2004-2005Chevy Malibu Chevy Malibu New Body Style Front Wheel Bearing & Hub Assembly with ABS Brakes (4th Vin Digit Z) Pair TRQ
2006-2008Chevy Malibu Chevy Malibu Front Wheel Bearing & Hub Assembly for Models with ABS Brakes Pair TRQ
2009-2012Chevy Malibu Chevy Malibu Front Wheel Bearing & Hub Assembly Pair TRQ
2004-2007Chevy Malibu Maxx Chevy Malibu Maxx Front Wheel Bearing & Hub Assembly Pair TRQ
2005-2007Pontiac G6 Pontiac G6 Front Wheel Bearing & Hub Assembly for Models with ABS Brakes Pair TRQ
2008-2010Pontiac G6 Pontiac G6 Front Wheel Bearing & Hub Assembly Pair TRQ
2007-2009Saturn Aura Saturn Aura Front Wheel Bearing & Hub Assembly Pair TRQ

This part replaces:

  • TRQ BHA53483
Part #: 1ASHS00340


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

TRQ
Brand #: BHA53483

How-to Video:

(12:29 min)