Wheel Bearing & Hub Assembly Pair TRQ BHA53301 - 1ASHS00006


  • Comes as a PAIR
    • Fits LH (Driver Side) and RH (Passenger Side) FRONT
  • 5 lug
  • w/o pulse vacuum hub lock
  • Fits 4 wheel drive 4WD (4x4) models
  • Includes ABS sensors, wires, and correct connectors
  • Includes wheel studs (already installed)
  • Comes completely preassembled, ready to install

WARNING: Cancer and Reproductive Harm -

Precision Engineered

From the highest grade SAE 1055 / 65Mn high carbon steel to exact OEM design.
100% Factory tested to precise OEM tolerances.

Highest Quality Materials

High quality, multi-lip seal reduces the intrusion of dirt and water. Heavy duty grease resists high temperature, moisture, and reduces intense friction.

Direct Fit Replacement

Guaranteed to fit and function correctly for your specific application.

Part Details

  • Quantity: Pair
  • Bearing Type: Ball Bearing

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

BHA53890 Axle / Spindle Nut Torque Specification

  1. step : Removing the Wheel (1:03)
    • While your car is still on the ground, use your 32mm socket to loosen the center hub nut
    • Loosen your lug nuts and jack up the car
    • Remove the lug nuts with your 19mm socket and ratchet
    • Remove the wheel and set aside
  2. step : Removing the Brakes (2:23)
    • Remove the 13 and 15mm bolts holding the calipers and the bracket
    • Wire tie the caliper up and out of the way, set the bracket to the side
    • Remove your rotor and set aside
    • Remove your dust shield by removing the 3 8mm bolts
    • Disconnect your ABS wiring harness using a 5mm allen wrench
  3. step : Removing the Hub (4:00)
    • Use an axle puller or a light but firm tap with a small hammer on the axle to remove the hub
    • Remove the 3 15mm bolts, using penetrating oil to help
    • A breaker bar or piece of pipe on the end of your ratchet may be needed
    • Remove the hub and clean the area with a wire brush
  4. step : Replacing the Hub (8:55)
    • Put position your new 1A Auto hub on the axle
    • Put the three 15mm bolts in place and tighten the nuts to 70 ft lbs
    • Reinstall your wiring harness, clip everything to the frame
    • Reinstall your dust shield, tightening the three 8mm bolts up
  5. step : Reinstalling the Brakes and Wheel (10:40)
    • Refer to our other videos for more detailed instructions
    • Remember to replace the lug nuts on in a star pattern
    • Lug nuts tighten to 90-100 ft lbs
    • Hub nut is 157-213 ft lbs
    • Make sure to check your brakes and steering before driving again
    • Make sure to have the vehicle aligned

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 32mm Socket
  • 15mm Socket
  • 19mm Socket
  • 8mm Socket
  • 13mm Socket

4.8 / 5.0
17 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Perfect fit ...
I purchased quite a few products for my 99 Explorer through when I Auto the shipping was extremely fast the fitment was perfect the quality of the products was awesome and I would definitely recommend anyone that can wait on a part to order from 1A Auto for the simple fact that everything they still has a lifetime warranty and the prices cannot be matched anywhere no other online retailer can match 1A Auto prices quality and warranty any questions and their staff is on top of everything they can answer any questions without having to transfer you from person to person to person the person that answers the phone is the person that will answer your question
September 11, 2018
3 weeks ago
Awesome price
Hmm I put both in about a month ago so far they work great side note went to part store and the price was almost double for 1 and they pulled up the wrong part I was like no thanks. The included abs sensors was a nice extra too.
August 27, 2018
1 month ago
Looks to be of OEM quality. Fit and function all went well.
I would buy again. Looks to be of OEM quality fit was same as original. I be buying more as needed, was a great price.
May 31, 2018
4 months ago
1999 Ford Explorer
This product is definitely the best deal out there for Wheel bearings for Explorers/Moutaineers. After installation, this resolved an ABS failure issue that I was experianceing and improve stability within the front end. I am very happy with my purchase and will use 1A Auto for future repairs.
May 29, 2018
4 months ago
Perfect replacement
I purchased 2 wheel bearing assemblies to replace the falling ones in my 2000 Ford Explorer. Since it's almost a 20 year old vehicle I didn't want to spend a lot so I took a gamble on these. With the aide of the installation video on 1aauto I was able to replace both of these with ease. Things are working great and I am pleased with the purchase. I would recommend these.
May 22, 2018
4 months ago
I've been ordering from this company for some time now. The products that I have order ford my ford explorer has been excellent. I will always order my parts from 1A Auto.

Customer service is very patient and nice. Take the time to help with what ever you need.
May 20, 2018
6 months ago
If your looking for the right part at the perfect price. Your seach is over. These guys are accurate at sendind parts. And if your a little handy watch there install videos and save your money. I’ll be glad to buy from them again.
April 12, 2018
5 months ago
1A Auto Parts are exact fit
I bought some bearings for a 2001 Ford Explorer Sport did a lot of research on them and what I like about that they show you a video how to replace them and exact fit thank you a lot preciate it 1aauto
March 27, 2018
6 months ago
Exact fit
I was Leary at first cuz I've never used this company before before and the parts arrived within a few days they were fit exactly and the quality seemed fine I guess I'll know more in a few months so far I'm pleased
March 22, 2018
6 months ago
Hub Assembly 2002 Sport Trac
Parts were received on time and were installed without any problems. I was pleased to see the hubs were of quality material and machined to match original hubs . The abs sensors came already installed on the hubs . Over six months since they were install and no problems ,my truck is running as it should without the annoying bearing noise driving me crazy ! I would recommend these hubs to anyone looking for oe quality at reasonable prices.
February 23, 2018
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 2 answers
What is the quality of this part compared to timken?
Anthony R on Feb 8, 2017
BEST ANSWER: I have had these assemblys (which I installed) for over a year and they are holding up just fine. I can not compare them to Timkin. For the price they were a good value. Would shop with A-1 again.
Will it fit an explorer with auto 4wd?
Robert H on Oct 17, 2016
BEST ANSWER: Yes, according to the information you supplied, the part you���re looking at will be correct for your vehicle. If you have any other questions or would like to place an order with one of our customer service representatives, please feel free to give us a call.

Vehicle Fit

Year Make Model Description
1995-2001Ford Explorer Ford Explorer 4 Wheel Drive Wheel Bearing & Hub Assembly Pair Front TRQ
2002Ford Explorer Sport Ford Explorer Sport 4 Wheel Drive Wheel Bearing & Hub Assembly Pair Front TRQ
2001-2002Ford Explorer Sport Trac Ford Explorer Sport Trac 4 Wheel Drive Wheel Bearing & Hub Assembly Pair Front TRQ
1997-2001Mercury Mountaineer Mercury Mountaineer 4 Wheel Drive Wheel Bearing & Hub Assembly Pair Front TRQ

This part replaces:

  • TRQ BHA53301
Part #: 1ASHS00006

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Brand #: BHA53301

How-to Video:

(12:15 min)