Wheel Bearing & Hub Assembly TRQ BHA53300 - 1ASHS00005

These replacement front hub and bearing assemblies are just what you need to get your vehicle in good working order again!


  • Come as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part number: 88957259
  • 3 Bolt Flanges (Bolt to Steering Knuckles with 3 Bolts)
  • Fit 5 Lug Wheels
  • Wheel Mounting Studs already installed
  • Include ABS Sensors and Plug Wires

Note: For the 2004-05 Malibu Classic requiring a VIN (Vehicle Identification Number), please match the 4th digit of your VIN number to the VIN code on your title. Your vehicles VIN number can be found in the lower left corner of the windshield or on your registration.

These hub and bearing assemblies are great replacements and have good cost savings over dealer units.


  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
  • You don't want to be delayed by a defective part. 1A Auto wheel hubs & bearings are all tested prior to shipping.

Fit Guaranteed

  • These hub & bearing sets will install just as your originals do. You can use your existing hardware.
  • Save time and money with direct fit hub bearing assemblies. No trips to the auto parts store or extra time trying to match up and press bearings.
  • Hub installation is a degree more difficult than changing a tire on most vehicles.


  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.
Precision Engineered

Precision Engineered using the highest grade SAE 1055 / 65Mn high carbon steel to exact OEM design.

100% Factory tested to precise OEM tolerances.

Highest Quality Materials

High quality, multi-lip seal reduces the intrusion of dirt and water, keeping grease clean for a longer bearing life.

Premium, heavy duty grease resists high temperature, moisture, and reduces intense friction pressure to help extend the life of the bearing.

Direct Fit Replacement

Direct fit replacement part is guaranteed to fit and function correctly for your specific application

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

BHA53888 Axle / Spindle Nut Torque Specification
  1. step : Removing the Wheel (1:18)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Remove the 35mm hub nut
    • Pull off the wheel
  2. step : Removing the Brake Caliper (1:50)
    • Remove the two 13mm bolts from the caliper
    • Pry off the caliper
    • Remove the brake rotor
  3. step : Removing the Hub (3:26)
    • Remove the three bolts that hold in the hub
    • Disconnect the ABS sensor if you have one
    • Reach in behind and remove the clip holding the hub
    • For the center, use a large axle nut socket
    • Once the center bolt is removed, simply pull the hub off the axle shaft
    • If it doesn't come off, you'll need an axle puller or a gear puller. Do not use a hammer
  4. step : Installing the Hub (9:26)
    • Once the new hub is ready, place it into position on the axle shaft
    • Take the original bolts and reattach the hub
  5. step : Step 5: Replacing the hub (9:26)
    • Once the new hub is ready, place it into position on the axle shaft.
    • Take the original bolts and reattach the hub.

Tools needed for replacement:

    Air Powered Tools

  • 3/8 Inch Air Impact Gun

  • General Tools

  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 19mm Socket
  • 35mm Socket

4.4 / 5.0
5 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
installed to these on the front of a 01 Grand Am still having trouble at the left front throwing up codes don't know if the wheel hub or something else will look into it later and see if it was the Hub is the problem or something else
May 10, 2018
1 month ago
Great Video, Excellent Part and Saved Several Hundred Dollars
I had watched several YouTube videos on how to change the hub, but Mike's from1A Auto was the best. Mike worked on the same vehicle as mine, which made it very helpful. The only problem in the entire process was getting the old hub out. It was rusted very tight and took a little effort to remove it. After that, I followed the steps in the 1A Auto video and replacement was very easy. The hub part fit perfectly, my indicator lights went off, and I was a happy camper. Especially when I realized I saved several hundred dollars on the price of the part and installation cost since I did it myself.
February 26, 2018
10 months ago
Works For Me!
quick delivery, correct parts, installed with no problems.
March 29, 2017
1 year ago
good value
They fit perfectly. Much less expensive than buying at a brick & mortar.
March 11, 2017
1 year ago
Theese were a perfect fit and not hard at all to swap.
May 1, 2016
over 3 years ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2004-2005 Chevy Classic Front Wheel Bearing & Hub Assembly for Models with ABS Brakes Pair TRQ
  • 1997-2003 Chevy Malibu Front Wheel Bearing & Hub Assembly for Models with ABS Brakes Pair TRQ
  • 1999-2004 Olds Alero Front Wheel Bearing & Hub Assembly Pair TRQ
  • 1997-1999 Olds Cutlass Front Wheel Bearing & Hub Assembly Pair (excluding Supreme Models) TRQ
  • 1999-2005 Pontiac Grand Am Front Wheel Bearing & Hub Assembly Pair TRQ

This part replaces:

  • TRQ BHA53300
Part #: 1ASHS00005

Brand #: BHA53300

How-to Video:

(10:00 min)