Replaces

Wheel Bearing & Hub Assembly TRQ BHA50040 - 1ASHS00064

Specifications:

  • Comes as a PAIR:
    • Includes both the LH (Driver Side) & RH (Passenger Side) REAR
  • Direct replacement
  • Replaces dealer part numbers: 42450-33020, 4245033020
  • Has ABS tone wheel already attached
  • Correct for FWD models ONLY
  • Fits 5 Lug Wheel
  • Studs already installed
  • Built to strict quality control standards
  • Will fit vehicles that have ABS and also either disc or drum brakes
    • Will not fit models that do not have ABS (Anti Lock Brakes)

 

Quality

  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both Bizrate.com and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
  • You don't want to be delayed by a defective part. 1A Auto wheel hubs & bearings are all tested prior to shipping.

Fit Guaranteed

  • These hub & bearing sets will install just as your originals do. You can use your existing hardware.
  • Save time and money with direct fit hub bearing assemblies. No trips to the auto parts store or extra time trying to match up and press bearings.
  • Hub installation is a degree more difficult than changing a tire on most vehicles.

Value

  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.
Precision Engineered

Precision Engineered using the highest grade SAE 1055 / 65Mn high carbon steel to exact OEM design.

100% Factory tested to precise OEM tolerances.

Highest Quality Materials

High quality, multi-lip seal reduces the intrusion of dirt and water, keeping grease clean for a longer bearing life.

Premium, heavy duty grease resists high temperature, moisture, and reduces intense friction pressure to help extend the life of the bearing.

Direct Fit Replacement

Direct fit replacement part is guaranteed to fit and function correctly for your specific application

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:44)
    • Loosen the 21mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack near the pinch weld
    • Secure the vehicle on jack stands at the unibody frame rail, and place it just ahead of the lower control arm on the rear
    • Repeat the process for the other side so the vehicle is level
    • Remove the hub cap
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Shoes (1:11)
    • Pull off the brake drum
    • Remove the brake shoe springs with the vise grip pliers
    • Hold the front retaining pin in place by hand
    • Twist off the front retaining spring with the vise grip pliers
    • Remove the retaining pin
    • Repeat the process for the other shoe
    • Hold the rear retaining pin in place by hand
    • Twist off the rear retaining spring with the vise grip pliers
    • Remove the rear brake shoe
    • Pry the emergency brake cable out of the front brake shoe
  3. step : Removing the Rear Wheel Hub (3:23)
    • Turn the wheel hub to access the 14mm bolts with a socket and ratchet
    • Remove the four 14mm bolts from the hub
    • Pull off the wheel hub
  4. step : Installing the Hub (5:19)
    • Clean the brake backing plate and the axle bore with a rag
    • Check that the hub o-ring is in place
    • Put the hub into place
    • Insert the four 14mm bolts into the hub
    • Tighten the 14mm bolts to 59 foot-pounds of torque
  5. step : Installing the New Brake Shoes (6:02)
    • Have a drain pan ready
    • Spray the backing plate surface with brake cleaner
    • Spray the adjustor wheel and e-brake with brake cleaner
    • Insert the e-brake arm into the brake
    • Press on a new horseshoe clip
    • Clamp the horseshoe clip with pliers
    • Tighten down the brake adjustor
    • Place the adjustor into the spring
    • Insert the spring and adjustor to the shoe
    • Insert the adjustor arm into place
    • Snap the ring onto the adjuster arm
    • Reinstall the spring to the arm
    • Lift the brake shoe into place
    • Insert the e-brake spring to the brake shoe
    • Thread the retaining pin into the brake shoe
    • Twist on the retaining spring with vise grip pliers
    • Put the rear brake shoe into place
    • Thread the retaining pin into the brake shoe
    • Twist on the retaining spring with vise grip pliers
    • Push the brake shoes together by hand
    • Adjust the shoes so they touch the surface of the drum
    • Hook the springs on with the vise grip pliers
    • Slide the brake drum on
  6. step : Reattaching the Wheel (12:18)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
    • Align the notch with the valve stem, and reinstall your hubcap

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Drain Pan
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Brake Parts Cleaner

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers
  • Needle nose pliers
  • Slip-Joint Pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 21mm Socket
  • 14mm Socket

5.0 / 5.0
4 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
4
0
0
0
0
Awesome Sales Staff and Company.
First and foremost the sales staff is one of the best experience.I have with these company 2nd is the stuff.I bought so far.I have no problem every single parts that.I order from them was perfectly fit and.I will definitely continue doing business with these amazing automotive company over all they are great company to do business with...Thanks Adam and Elise
September 26, 2017
Purchased
7 months ago
Wheelbearings
Great product perfect fit!! Very fast shipping. A1Auto has the best parts I have used for replacement parts. I order form them all the time.
February 14, 2017
Purchased
1 year ago
Nice fit
Went in just like old ones love them. Sent everything no hassle.
March 27, 2018
Purchased
3 months ago
Hub assembly
Parts got here quickly and were exactly what we ordered. The price was right and the installation video was was very helpful. We plan to continue shopping with your company. Thank you so much. Jaimie Spencer
March 25, 2018
Purchased
1 month ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1992-2001 Lexus ES300 Wheel Bearing & Hub Assembly Rear for Models with with ABS Brakes Pair TRQ
  • 1999-2003 Lexus RX300 Front Wheel Drive Wheel Bearing & Hub Assembly Rear with with ABS Brakes Pair TRQ
  • 1995-2004 Toyota Avalon Wheel Bearing & Hub Assembly Rear for Models with with ABS Brakes Pair TRQ
  • 1992-2001 Toyota Camry Wheel Bearing & Hub Assembly Rear for Models with with ABS Brakes Pair TRQ
  • 1999-2003 Toyota Solara Wheel Bearing & Hub Assembly Rear for Models with with ABS Brakes Pair TRQ

This part replaces:

  • TRQ BHA50040
Part #: 1ASHS00064



TRQ
Brand #: BHA50040

How-to Video:

(12:59 min)