Replaces

Wheel Bearing & Hub Assembly TRQ BHA50001 - 1ASHF00197

Specifications:

  • Fits either LH (Driver Side) or RH (Passenger Side) Front
  • Direct replacement
  • 3 Bolt Triangular Flange
  • Fits 6 Lug Wheel
  • New wheel studs already installed
  • ABS (Anti-Lock Brakes) Sensor is included
  • Fits New Body Style Models only

Quality

  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both Bizrate.com and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
  • You don't want to be delayed by a defective part. 1A Auto wheel hub & bearings are all tested prior to shipping.

Fit Guaranteed

  • This hub & bearing will install just as your original does. You can use your existing hardware.
  • Save time and money with this direct fit hub bearing assembly. No trips to the auto parts store or extra time trying to match up and press bearings.
  • Hub installation is a degree more difficult than changing a tire on most vehicles.

Value

  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

BHA50001 Torque Spec
  1. step : Removing the Wheel (1:05)
    • Pry off the center cap with a flat blade screwdriver
    • Remove the hub nut cover with a hammer and chisel
    • Remove the hub nut with a 36mm socket and a breaker bar or a ratchet with pipe for leverage
    • Make sure the axle moves freely
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (2:05)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
    • Check for gouges on both sides of the rotor
  3. step : Removing the Brake Caliper and Pads (2:29)
    • Remove the two 19mm bolts from the brake caliper
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
    • Remove the brake pad slides
  4. step : Removing the Brake Caliper Bracket and Rotor (3:22)
    • Remove the two 18mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Remove the T30 Torx screw from the brake rotor
    • Pull the rotor off by hand
    • If the rotor will not come off by hand, apply penetrating oil to the studs
    • Tighten M10 bolts into the rotor to press it off
  5. step : Removing the Hub (4:35)
    • Apply penetrating oil to the hub bolts
    • Remove two of the three 15mm bolts from the hub mount
    • Loosen the third 15mm bolt
    • Use a hammer to loosen up the hub
    • Disconnect the ABS sensor wiring harness near the chassis
    • Remove the third 13mm bolt
    • Pull off the hub and backing plate
    • Disconnect the ABS sensor wiring harness at the hub
  6. step : Installing the New Hub (6:44)
    • Clean the steering knuckle with a wire brush
    • Apply white grease to the hub flange
    • Push the hub through the backing plate and on to the steering knuckle
    • Start the three 15mm bolts by hand
    • Tighten the 15mm bolts to 133 foot-pounds of torque
    • Route and reconnect the abs sensor wire at both ends
  7. step : Reinstalling the Brake Caliper Bracket and Rotor (8:25)
    • Slide the rotor into place
    • Thread one lug nut to hold the rotor in place
    • Put the brake caliper bracket into place
    • Start the 18mm bolts by hand
    • Tighten the 18mm bolts to 100 foot-pounds
  8. step : Reinstalling the Brake Caliper and Pads (9:06)
    • Apply white grease to the brake pads
    • Clean the rotor with brake parts cleaner or mineral spirits
    • Install the new brake pads into the bracket
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Put the caliper on
    • Thread bolts by hand
    • Tighten bolts to 50 foot-pounds
    • Remove the placeholder lug nut
  9. step : Reattaching the Wheel (11:00)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Put on the hub nut
    • Tighten the hub nut to 156 foot-pounds
    • Tighten the lug nuts to between 100-110 foot-pounds in a crossing or star pattern
    • Reattach the center cap, inserting the tongue into the wheel groove
  10. step : Testing the Brakes (11:36)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Chisel
  • Floor Jack
  • Hammer
  • Large C-Clamp

  • Materials, Fluids, and Supplies

  • Brake Parts Cleaner
  • M10 x 7cm bolts
  • Mineral Spirits
  • Rust Penetrant
  • White Grease

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 15mm Socket
  • 18mm Socket
  • 19mm Socket
  • 36mm Socket

  • Torx Drivers & Sockets

  • T30 Torx Driver

4.7 / 5.0
18 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
16
1
0
0
1
Seems like a good replacement
I had the Right/Front hub replaced by an autoshop and labor/materials was $350. I told myself I would do the other side myself when the other bearing went bad. Well, it went bad in a few months. Looking at other auto parts stores, the cost was anywhere from $150 to $200. I came across this dandy on 1aauto for $70 and figured for that price, it was worth a shot. it went on perfect and looks like the old hub. so far, so good. only 100 miles on it but seems decent.
I'm not sure on the longevity but for the price, it's worth a try.
May 4, 2017
Purchased
10 months ago
service
The part was easy to find and to order. Step were very easy to follow. Got part in 2 days. Totally satisfied with service.
October 16, 2017
Purchased
4 months ago
hub assembly
Part came in a timely manner, was a direct fit had hold down clips for wiring and came with information sheet.I would recommend this product to all my friends.
August 18, 2017
Purchased
6 months ago
Exact part I needed install was a breeze! Thanks for have great prices!
January 10, 2018
Purchased
1 month ago
Perfect fit
New Wheel Bearing & Hub was simple to install and the truck glides smooth and silent now. The next test is to see how long it lasts!
August 22, 2017
Purchased
6 months ago
Exact replacement
Removing the old hub was nothing like the 1A video because it was rusted and corroded in place. Once I got the old one out, the new part fit perfectly.
January 24, 2018
Purchased
1 month ago
Perfect fit
The part arrived ahead of schedule and it fit exactly perfect! Great supplier would do business again!!
February 8, 2017
Purchased
1 year ago
Hub & Bearing 2007 Chev Silverado
New hub assy arrived quickly and was priced competitively. Installed and works great. Very pleased with 1A Auto service and pricing. If needed I will definitely order the right side when needed. THANK YOU
February 23, 2017
Purchased
1 year ago
Great product great price fantastically quick shipping !!
I am a new customer who will certainly be coming back . Brian
April 4, 2017
Purchased
11 months ago
Wheel bearing
Amazing fast shipping I have not installed the part yet. The price is great too
December 6, 2017
Purchased
2 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 3 questions Browse 3 questions and 7 answers
Does this include the bolts?
Ryan A on Apr 11, 2016
BEST ANSWER: It has the studs already pressed in for the lugs,but does not include the 3 bolts that hold it in the spindle assembly.You have to re-use the factory ones.
Do these hubs fit 2WD trucks?
Giuseppe A on Oct 27, 2017
BEST ANSWER: These are specific to 4WD or AWD applications. Please view our other listings for the appropriate replacement.
I have a 2008 Silverado with a 6 inch lift and 35 inch tires, do you feel that your product will be sufficient to work for my truck?
Ryan s on Apr 15, 2017
BEST ANSWER: These will fit and function the same. Chances are though that with the weight of those tires and the lift these could experience premature failure due to their load.

How-to Video:

(12:01 min)

Tools List:

    General Tools

  • Chisel
  • Floor Jack
  • Hammer
  • Large C-Clamp

  • Materials, Fluids, and Supplies

  • Brake Parts Cleaner
  • M10 x 7cm bolts
  • Mineral Spirits
  • Rust Penetrant
  • White Grease

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 15mm Socket
  • 18mm Socket
  • 19mm Socket
  • 36mm Socket

  • Torx Drivers & Sockets

  • T30 Torx Driver



This part replaces:

  • OE # 25918329, 10393171, 15229012
  • Hollander 538-00128
  • TRQ BHA50001

Vehicle Fit

  • 2007-2014 Cadillac Escalade 4 Wheel Drive Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
  • 2007-2014 Cadillac Escalade ESV 4 Wheel Drive Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
  • 2007-2013 Cadillac Escalade EXT 4 Wheel Drive Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
  • 2007-2013 Chevy Avalanche 1500 4 Wheel Drive Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
  • 2007 Chevy Silverado 1500 4 Wheel Drive New Body Style Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
  • 2008-2013 Chevy Silverado 1500 4 Wheel Drive Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
  • 2009-2013 Chevy Silverado 1500 2 Wheel Drive Front Wheel Bearing & Hub Assembly for Models with RPO Code J92 (4 Wheel Disc Brakes & ABS) Driver or Passenger Side TRQ
  • 2007-2014 Chevy Suburban 1500 4 Wheel Drive Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
  • 2007-2014 Chevy Tahoe 4 Wheel Drive Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
  • 2010-2014 Chevy Tahoe 2 Wheel Drive Front Wheel Bearing & Hub Assembly for Models with RPO Code PPV (Police Package Vehicle) Driver or Passenger Side TRQ
  • 2007 GMC Sierra 1500 4 Wheel Drive New Body Style Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
  • 2008-2013 GMC Sierra 1500 4 Wheel Drive Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
  • 2009-2013 GMC Sierra 1500 2 Wheel Drive Front Wheel Bearing & Hub Assembly for Models with RPO Code J92 (4 Wheel Disc Brakes & ABS) Driver or Passenger Side TRQ
  • 2007-2014 GMC Yukon 4 Wheel Drive Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
  • 2007-2014 GMC Yukon XL 1500 4 Wheel Drive Front Wheel Bearing & Hub Assembly Driver or Passenger Side TRQ
Part #: 1ASHF00197

Ships Same Day for orders placed by 4 P.M. ET

TRQ
Brand #: BHA50001

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More