Replaces

Wheel Bearing & Hub Assembly TRQ BHA50000 - 1ASHF00063

Part Details

  • Wheel Bearing & Hub Assembly Features & Benefits:
    Direct Fit Replacement
    Precision Engineered
    Highest Quality Materials
  • Bearing Type: Tapered Roller Bearing

Specifications:

  • Fits LH (Driver Side) or RH (Passenger Side) Front
  • 4 bolt flange
  • Includes ABS sensor and plug wire
  • Fits 8 Lug Wheel
  • Studs already installed
  • Direct replacement
  • Built to strict quality control standards

What are Tapered Bearings and Why Use Them?

Tapered bearings are better than roller ball bearings at handling forces exerted on the bearing during cornering (known as axial load) in trucks and large cars. 

Roller ball bearings have spherical ball bearings between two straight rings (called races). Tapered bearings use tapered rollers shaped like flat-topped cones and two races angled from the outside to the inside of the bearing. The greater the angle, the more axial load the bearing can handle.

Your model came from the factory with tapered bearings. This type of bearing handles cornering forces better for trucks and large cars. Roller ball bearings work well for smaller cars, but replacing a tapered bearing with a roller ball bearing will result in increased wear and faster failure.

 

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

BHA50000 Torque Spec

  1. step : Removing the Wheel (0:52)
    • Loosen the lug nut covers with a 22mm socket
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Caliper Bracket (1:17)
    • Remove the T55 Torx bolts from the caliper
    • Use either a C-clamp to squeeze the caliper to push the caliper piston in
    • Remove the caliper
    • Pry the brake pads off with a flat blade screwdriver
    • Use a piece of pipe and ratchet to remove two 18mm bolts from the caliper bracket
    • Slide the rotor off
  3. For the third step, if you do not have air tools you can either loosen the center hub nut before you take your brakes apart by having somebody hold the brakes, or you can use a large bar, put it between the lug studs to hold it, and break the bar.

  4. step : Removing the Hub (2:58)
    • Disconnect the ABS harness from the frame and steering spindle by removing the clips
    • Pry off the center hub cap using a flat blade screw driver and hammer
    • Remove the center hub nut with an impact wrench and air blow gun
    • Remove the three 15mm hub bolts with two 15mm wrenches
    • Twist the hub nut a quarter of the way
    • And hammer from the back of the hub
    • Remove the hub nut and pull the hub out
  5. step : Installing the New Hub (5:06)
    • Place the backing plate onto the hub
    • Push the hub back into place
    • Insert and tighten the 15mm hub bolts
    • Torque the 15mm hub bolts to 75 ft/lbs
    • Remove the clip and feed the ABS harness back into place
    • Replace the clips and brackets to the ABS harness
    • Replace center hub nut and washer
    • Tighten the center hub nut
  6. step : Replacing the Caliper Bracket (6:46)
    • Place the rotor on the hub
    • Twist a lug nut to hold the rotor in place
    • Put the caliper on
    • Replace and tighten the 18mm bolts
    • Torque the 18mm bolts to 75 ft/lbs
    • Install the new brake pads into the bracket, tapping lightly with a hammer
    • Grease the caliper bolts
    • Place the caliper onto the bracket
    • Replace and tighten the T55 Torx bolts
    • Torque the bolts to 30 ft/lbs
  7. step : Reinstalling the Wheel (8:46)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the 22mm bolts
    • Tighten the lug nuts to 100 ft/lbs in a crossing or star pattern
    • Torque the center hub nut to a 125 ft/lbs
    • Reattach the center cap
  8. step : Testing the Brakes (9:33)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    Allen Wrenches

  • 5mm Allen Wrench

  • General Tools

  • Hammer
  • Jack Stands
  • Large C-Clamp

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 18mm Socket
  • 22mm Socket
  • 35mm Socket

  • Torx Drivers & Sockets

  • T55 Torx Socket

  • Wrenches - Metric

  • 15mm Wrench

4.9 / 5.0
19 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
18
0
1
0
0
Good all way around
Part was at the best price I could find, was shipped and received very quickly, and fit and is operating very well. Very satisfied.
September 13, 2018
Purchased
1 month ago
Just right
The part was exactly what I ordered and shipping was quick. For the price you can beat it. I will be ordering more parts from here. My local parts store was almost triple what A1 was asking. I would recommend this site to anyone!
August 18, 2018
Purchased
2 months ago
Front suspension
Had a hard time trying to find the parts I needed, came across 1A Auto where I found everything I needed at an affordable price. Very satisfied customer!!
July 23, 2018
Purchased
2 months ago
Recommended
This Wheel Bearing and Hub Assembly showed up on time and was a good fit for my Hummer H2. The quality of the part at a good price is why I quit shopping at auto parts stores. You won't be sorry.
May 18, 2018
Purchased
5 months ago
The part wheel hub bearing works great and at a great price very happy with my expirence with 1aauto.
May 1, 2018
Purchased
5 months ago
The wheel bearing worked out good am happy with it and good price i will buy again thanks
April 17, 2018
Purchased
6 months ago
excellent
perfect fit, wheel bearing &hub #1ASHF00063 GREAT PRODUCT
March 25, 2018
Purchased
6 months ago
Parts arrived fast reasonably priced would use again
December 10, 2017
Purchased
10 months ago
Fit like the original
This hub fit just like the original, and worked great.
December 9, 2017
Purchased
10 months ago
Silverado Wheel Bearing
Part was easy to find on the web site. Youtube instillation
video was helpful. Item shipped quickly (4 days to Bend OR).
I probably should have purchased the pair for about $104,
but at $70 was half of what could be found locally. Took
me about 3hrs to install, but could probably do it in 2 now.
Rating could be higher depending on service life of part.
November 30, 2017
Purchased
10 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 4 questions Browse 4 questions and 4 answers
Will this fit a 2002 silverado 2500 2wd?
Steve T on Dec 20, 2016
BEST ANSWER: Yes, this will be a direct fit replacement hub and bearing assembly for your 2002 Chevy Silverado 2500 with 2WD.
Will this fit a 2006 Silverado 1500 HD 4wd?
Chris M on May 6, 2017
BEST ANSWER: Yes, according to the information you supplied, the part you’re looking at will be correct for your vehicle. If you have any other questions or would like to place an order with one of our customer service representatives, please feel free to give us a call.
Does this fit 4 wheel drive?
Travis K on Apr 29, 2017
BEST ANSWER: Depending on the vehicle it will fit either two or four wheel drive. Please refer to our fit list located on the part's page. Please call 888-844-3393 if you are still unsure!
Where are these bearing hubs manufactured?
Emory on Mar 22, 2017
BEST ANSWER: These are made in either China, Taiwan, or Japan.

Vehicle Fit

Year Make Model Description
2002-2006Chevy Avalanche 2500 Chevy Avalanche 2500 4 Wheel Drive Front Wheel Bearing & Hub Assembly TRQ
2002-2003Chevy Avalanche 2500 Chevy Avalanche 2500 Rear Wheel Drive Front Wheel Bearing & Hub Assembly TRQ
2001-2003Chevy Silverado 1500 HD Chevy Silverado 1500 HD 4 Wheel Drive Front Wheel Bearing & Hub Assembly TRQ
2001-2003Chevy Silverado 1500 HD Chevy Silverado 1500 HD Rear Wheel Drive Front Wheel Bearing & Hub Assembly TRQ
2005-2006Chevy Silverado 1500 HD Chevy Silverado 1500 HD 4 Wheel Drive Front Wheel Bearing & Hub Assembly TRQ
2005-2006Chevy Silverado 1500 HD Chevy Silverado 1500 HD Rear Wheel Drive Front Wheel Bearing & Hub Assembly TRQ
2007Chevy Silverado 1500 HD Classic Chevy Silverado 1500 HD Classic 4 Wheel Drive Front Wheel Bearing & Hub Assembly TRQ
2007Chevy Silverado 1500 HD Classic Chevy Silverado 1500 HD Classic Rear Wheel Drive Front Wheel Bearing & Hub Assembly TRQ
1999-2004Chevy Silverado 2500 Chevy Silverado 2500 4 Wheel Drive Front Wheel Bearing & Hub Assembly TRQ
2001-2004Chevy Silverado 2500 Chevy Silverado 2500 Rear Wheel Drive Front Wheel Bearing & Hub Assembly TRQ
2001-2006Chevy Silverado 2500 HD Chevy Silverado 2500 HD 4 Wheel Drive Front Wheel Bearing & Hub Assembly TRQ
2001-2004Chevy Silverado 2500 HD Chevy Silverado 2500 HD Rear Wheel Drive Front Wheel Bearing & Hub Assembly TRQ
2007Chevy Silverado 2500 HD Classic Chevy Silverado 2500 HD Classic 4 Wheel Drive Front Wheel Bearing & Hub Assembly TRQ
2007Chevy Silverado 2500 HD Classic Chevy Silverado 2500 HD Classic 4 Wheel Drive Front Wheel Bearing & Hub Assembly TRQ
2001-2006Chevy Silverado 3500 Chevy Silverado 3500 4 Wheel Drive RPO Code JH6 (Hyd Power 4 Wheel Disc Brakes, 9900lb) with Single Rear Wheels (SRW) Front Wheel Bearing & Hub Assembly TRQ
2001-2003Chevy Silverado 3500 Chevy Silverado 3500 4 Wheel Drive with Dual Rear Wheels (DRW) Front Wheel Bearing & Hub Assembly TRQ
2004-2006Chevy Silverado 3500 Chevy Silverado 3500 4 Wheel Drive with Dual Rear Wheels (DRW) Front Wheel Bearing & Hub Assembly TRQ
2007Chevy Silverado 3500 Classic Chevy Silverado 3500 Classic 4 Wheel Drive RPO Code JH6 (Hyd Power 4 Wheel Disc Brakes, 9900lb) with Single Rear Wheels (SRW) Front Wheel Bearing & Hub Assembly TRQ
2007Chevy Silverado 3500 Classic Chevy Silverado 3500 Classic 4 Wheel Drive with Dual Rear Wheels (DRW) Front Wheel Bearing & Hub Assembly TRQ
2000-2006Chevy Suburban 2500 Chevy Suburban 2500 4 Wheel Drive Front Wheel Bearing & Hub Assembly TRQ
2001-2006Chevy Suburban 2500 Chevy Suburban 2500 Rear Wheel Drive Front Wheel Bearing & Hub Assembly TRQ
2001-2003GMC Sierra 1500 HD GMC Sierra 1500 HD 4 Wheel Drive Front Wheel Bearing & Hub Assembly TRQ
2001-2003GMC Sierra 1500 HD GMC Sierra 1500 HD Rear Wheel Drive Front Wheel Bearing & Hub Assembly TRQ
2005-2006GMC Sierra 1500 HD GMC Sierra 1500 HD 4 Wheel Drive Front Wheel Bearing & Hub Assembly TRQ
2005-2006GMC Sierra 1500 HD GMC Sierra 1500 HD Rear Wheel Drive Front Wheel Bearing & Hub Assembly TRQ
2007GMC Sierra 1500 HD Classic GMC Sierra 1500 HD Classic 4 Wheel Drive Front Wheel Bearing & Hub Assembly TRQ
2007GMC Sierra 1500 HD Classic GMC Sierra 1500 HD Classic Rear Wheel Drive Front Wheel Bearing & Hub Assembly TRQ
1999-2004GMC Sierra 2500 GMC Sierra 2500 4 Wheel Drive Front Wheel Bearing & Hub Assembly TRQ
2001-2004GMC Sierra 2500 GMC Sierra 2500 Rear Wheel Drive Front Wheel Bearing & Hub Assembly TRQ
2001-2006GMC Sierra 2500 HD GMC Sierra 2500 HD 4 Wheel Drive Front Wheel Bearing & Hub Assembly TRQ
2001-2006GMC Sierra 2500 HD GMC Sierra 2500 HD Rear Wheel Drive Front Wheel Bearing & Hub Assembly TRQ
2007GMC Sierra 2500 HD Classic GMC Sierra 2500 HD Classic 4 Wheel Drive Front Wheel Bearing & Hub Assembly TRQ
2001-2006GMC Sierra 3500 GMC Sierra 3500 4 Wheel Drive RPO Code JH6 (Hyd Power 4 Wheel Disc Brakes, 9900lb) with Single Rear Wheels (SRW) Front Wheel Bearing & Hub Assembly TRQ
2001-2003GMC Sierra 3500 GMC Sierra 3500 4 Wheel Drive with Dual Rear Wheels (DRW) Front Wheel Bearing & Hub Assembly TRQ
2004-2006GMC Sierra 3500 GMC Sierra 3500 4 Wheel Drive with Dual Rear Wheels (DRW) Front Wheel Bearing & Hub Assembly TRQ
2007GMC Sierra 3500 Classic GMC Sierra 3500 Classic 4 Wheel Drive RPO Code JH6 (Hyd Power 4 Wheel Disc Brakes, 9900lb) with Single Rear Wheels (SRW) Front Wheel Bearing & Hub Assembly TRQ
2007GMC Sierra 3500 Classic GMC Sierra 3500 Classic 4 Wheel Drive with Dual Rear Wheels (DRW) Front Wheel Bearing & Hub Assembly TRQ
2000-2006GMC Yukon XL 2500 GMC Yukon XL 2500 4 Wheel Drive Front Wheel Bearing & Hub Assembly TRQ
2001-2006GMC Yukon XL 2500 GMC Yukon XL 2500 Rear Wheel Drive Front Wheel Bearing & Hub Assembly TRQ
2003-2007Hummer H2 Hummer H2 4 Wheel Drive Front Wheel Bearing & Hub Assembly TRQ

This part replaces:

  • Hollander 538-01482, 538-01764
  • Reference Number 515086
  • Reference Number 515088
  • TRQ BHA50000
  • OE # 15042868
  • OE # 15104582
  • OE # 15112411
Part #: 1ASHF00063


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

TRQ
Brand #: BHA50000

How-to Video:

(10:03 min)