Replaces

Wheel Bearing & Hub Assembly Timken SP450202 - TKSHF00078

TIMKEN WHEEL BEARING & HUB ASSEMBLY: SP450202

This replacement wheel bearing & hub assembly is just what you need to get your vehicle in good working order again.

Specifications:

  • Brand New Timken Wheel Bearing & Hub Assembly
  • Fits either LH (Driver Side) or RH (Passenger Side) FRONT
  • 3 Bolt Flange
  • Fits 5 Lug Wheel
  • Replaces dealer part numbers: 1F60-33-061, 3L54-1104-AA, 3L54-1104-AB, 3L5Z-1104-AA, 6L5Z-1104-B, 1F6033061, 3L541104AA, 3L541104AB, 3L5Z1104AA, 6L5Z1104B
  • Studs already installed
  • Includes ABS sensor and correct plug
  • Direct replacement
  • Built to strict quality control standards
  • Fits models with AWAL (All Wheel Anti-Lock Brakes) only

Note: Trucks with All Wheel ABS will have ABS sensors in the front hubs.

Quality

  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both Bizrate.com and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
  • You don't want to be delayed by a defective part. 1A Auto wheel hub & bearings are all tested prior to shipping.

Fit Guaranteed

  • This hub & bearing will install just as your original does. You can use your existing hardware.
  • Save time and money with this direct fit hub bearing assembly. No trips to the auto parts store or extra time trying to match up and press bearings.
  • Hub installation is a degree more difficult than changing a tire on most vehicles.

Value

  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.

Note: These parts are authentic Timken brand products that are supplied and packaged by Timken.   In some cases, Timken will source parts from other high quality suppliers such as SKF and Koyo. These parts are subjected to the very same testing and quality standards as all Timken products.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:00)
    • Loosen the lug nuts with the vehicle on the ground
    • Remove the cotter pin from the axle nut if it has one
    • Loosen the axle nut
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (3:22)
    • Remove the bolts from the caliper bracket
    • Pull the caliper off
    • Put the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
  3. step : Removing the Brake Rotor (4:15)
    • Remove the two bolts from the caliper bracket
    • Pull off the brake caliper bracket
    • Remove a screw from the rotor if it has one
    • Strike the drum surface of the rotor with a hammer to loosen the rotor
    • Pull the rotor off
    • Clean the hub surface with a wire brush
  4. step : Removing the Hub Assembly (5:18)
    • Remove the axle bolt
    • Place a punch in the axle hole and hammer it to release the hub from the splines
    • Remove the bolts from the back of the hub
    • Remove the wheel hub and bearing
  5. step : Installing the Hub Assembly (7:53)
    • Insert the wheel hub into the spindle
    • Tighten the hub bolts
    • Reinstall the axle nut
  6. step : Installing the Brake Rotor (8:58)
    • Apply grease to the hub surface
    • Put the rotor onto the hub backwards
    • Spray the rear of the hub with brake cleaner
    • Pull off the brake rotor
    • Slide the brake rotor on
    • Spray the front of the rotor with brake cleaner
    • Put the caliper bracket into place
    • Insert the two into the caliper bracket
    • Torque the two bolts
  7. step : Installing the Brake Pads (9:48)
    • Put the brake pads into the caliper bracket
    • Apply grease to the back of the brake pads
    • Push back the caliper piston with grove lock pliers
    • Put the brake caliper into place
    • Insert the two bolts into the caliper
    • Torque the two bolts
  8. step : Reattaching the Wheel (11:01)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Torque the lug nuts in a crossing or star pattern
    • Torque the axle nut

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Chisel
  • Hammer

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • Complete Metric Socket Set

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question
my wheel bearing assembly has a square abs sensor connector?
Andrew M on Jan 25, 2016

Vehicle Fit

  • 2003-2005 Ford Explorer Sport Trac 4 Wheel Drive Front Wheel Bearing & Hub Assembly for Models with 4 Wheel ABS Brakes Round Plug Timken SP450202
  • 2003 Ford Explorer Sport Trac 4 Wheel Drive Front Wheel Bearing & Hub Assembly for Models with 4 Wheel ABS Brakes Round Plug Timken SP450202
  • 2003-2010 Ford Ranger 4 Wheel Drive Front Wheel Bearing & Hub Assembly for Models with 4 Wheel ABS Brakes Round Plug Timken SP450202
  • 2003-2009 Mazda B4000 Truck 4 Wheel Drive Front Wheel Bearing & Hub Assembly for Models with 4 Wheel ABS Brakes Round Plug Timken SP450202

This part replaces:

  • Timken SP450202
  • Hollander 538-01673, 538-01620
  • OE # 6L5Z 1104 A 6L5Z 1104 B
Only 4 left in stock
Part #: TKSHF00078

Timken
Brand #: SP450202

How-to Video:

(12:07 min)