Replaces

Wheel Bearing & Hub Assembly Timken 513137 - TKSHS00001

Specifications:

  • Brand New Timken Hub Assemblies
  • Comes as a Pair
    • Fits both LH (Driver Side) & RH (Passenger Side) Front
  • 3 Bolt Flanges
  • Fit 5 Lug Wheels
  • Wheel mounting studs already installed
  • Includes ABS sensors and plug wires

Note: These parts are authentic Timken brand products that are supplied and packaged by Timken.   In some cases, Timken will source parts from other high quality suppliers such as SKF and Koyo. These parts are subjected to the very same testing and quality standards as all Timken products.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (1:18)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Remove the 35mm hub nut
    • Pull off the wheel
  2. step : Removing the Brake Caliper (1:50)
    • Remove the two 13mm bolts from the caliper
    • Pry off the caliper
    • Remove the brake rotor
  3. step : Removing the Hub (3:26)
    • Remove the three bolts that hold in the hub
    • Disconnect the ABS sensor if you have one
    • Reach in behind and remove the clip holding the hub
    • For the center, use a large axle nut socket
    • Once the center bolt is removed, simply pull the hub off the axle shaft
    • If it doesn't come off, you'll need an axle puller or a gear puller. Do not use a hammer
  4. step : Installing the Hub (9:26)
    • Once the new hub is ready, place it into position on the axle shaft
    • Take the original bolts and reattach the hub
  5. step : Step 5: Replacing the hub (9:26)
    • Once the new hub is ready, place it into position on the axle shaft.
    • Take the original bolts and reattach the hub.

Tools needed for replacement:

    Air Powered Tools

  • 3/8 Inch Air Impact Gun

  • General Tools

  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 19mm Socket
  • 35mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2004-2005Chevy Classic Chevy Classic Front Wheel Bearing & Hub Assembly for Models with ABS Brakes Pair Timken 513137
1997-2003Chevy Malibu Chevy Malibu Front Wheel Bearing & Hub Assembly for Models with ABS Brakes Pair Timken 513137
1999-2004Oldsmobile Alero Olds Alero Front Wheel Bearing & Hub Assembly Pair Timken 513137
1997-1999Oldsmobile Cutlass Olds Cutlass Front Wheel Bearing & Hub Assembly Pair (excluding Supreme Models) Timken 513137
1999-2005Pontiac Grand Am Pontiac Grand Am Front Wheel Bearing & Hub Assembly Pair Timken 513137

This part replaces:

  • Timken 513137
Only 2 left in stock
Part #: TKSHS00001


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Timken
Brand #: 513137

How-to Video:

(10:00 min)