Replaces

Wheel Bearing & Hub Assembly Pair TRQ BHA84995 - 1ASHS01206

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Includes:   (1) 36mm Axle Nut Socket
  • Wheel Bearing & Hub Assembly Features & Benefits:
      Direct Fit Replacement
      Precision Engineered
      Highest Quality Materials
  • Bearing Type:   Ball Bearing
  • Quantity:   Pair

 

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the wheel and tire (1:18)
    • Raise and secure the vehicle.
    • Remove the lug nuts and then the wheel.
  2. step : Remove Caliper (2:07)
    • Turn wheels all the way in the opposite direction of the side you are working on.
    • Use your 13mm socket wrench to remove the caliper bolts.
    • Use a wire tie to help prevent stress on the caliper.
    • Use your 18mm socket to remove the brackets.
  3. step : Remove brake disk (4:13)
    • Take care not to touch the disk, and if you do make sure to clean it with rubbing alcohol or mineral spirits.
  4. step : Remove Hub (4:42)
    • Use a 35mm socket to remove the hub nut.
    • Give the axle a slight tap with a hammer to loosen it.
    • Remove the 3 bolts securing the hub using your 18mm socket and extension and ratchet or breaker bar.
    • You can use penetrating oil to help.
    • Disconnect your ABS sensor.
    • Use a rubber mallet to break your hub free, and work around the flange with the hammer to pull it off.
    • Remove the hub and shield.
    • Clean up any corrosion with a wire brush.
  5. step : Install new hub (9:10)
    • Use some penetrating oil to prep the knuckle for the new hub.
    • Put the three 18 mm bolts in place and tighten the nuts to 90 ft lbs.
    • Reinstall the ABS harness.
    • Tighten but don't torque the lug nut.
  6. step : Put brakes and wheel back on (11:50)
    • Remember to replace the lug nuts on in a star pattern.
    • Lug nuts tighten to 100-120 ft lbs
    • Hub nut is 103 ft lbs.
    • Make sure to check your brakes and steering before driving again.
    • Make sure to pump the brakes and seat your rotors.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands
  • Large C-Clamp
  • Rubber Mallet
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Rust Penetrant
  • Wire Ties

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 18mm Socket
  • 19mm Socket
  • 35mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Does hub assembly come with spindle nut?
Paul B July 27, 2018
Mine did not come with spindle nut. I had to reused the old one.
J A July 27, 2018
The pair that i purchased did not come with spindle nut
A N July 27, 2018
Year Make Model Description
2004-2007Buick Rainier Buick Rainier Front Wheel Bearing & Hub Assembly Pair with (1) 36mm Axle Nut Socket TRQ
2003-2006Chevy SSR Chevy SSR Front Wheel Bearing & Hub Assembly Pair with (1) 36mm Axle Nut Socket TRQ
2002-2009Chevy Trailblazer Chevy Trailblazer Front Wheel Bearing & Hub Assembly Pair with (1) 36mm Axle Nut Socket TRQ
2002-2006Chevy Trailblazer EXT Chevy Trailblazer EXT Front Wheel Bearing & Hub Assembly Pair with (1) 36mm Axle Nut Socket TRQ
2002-2009GMC Envoy GMC Envoy Front Wheel Bearing & Hub Assembly Pair with (1) 36mm Axle Nut Socket TRQ
2002-2006GMC Envoy XL GMC Envoy XL Front Wheel Bearing & Hub Assembly Pair with (1) 36mm Axle Nut Socket TRQ
2004-2005GMC Envoy XUV GMC Envoy XUV Front Wheel Bearing & Hub Assembly Pair with (1) 36mm Axle Nut Socket TRQ
2003-2007Isuzu Ascender Isuzu Ascender Front Wheel Bearing & Hub Assembly Pair with (1) 36mm Axle Nut Socket TRQ
2002-2004Oldsmobile Bravada Olds Bravada Front Wheel Bearing & Hub Assembly Pair with (1) 36mm Axle Nut Socket TRQ
2005-2009Saab 9-7X Saab 9-7X Front Wheel Bearing & Hub Assembly Pair with (1) 36mm Axle Nut Socket TRQ
Part #: 1ASHS01206


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

TRQ
Brand #: BHA84995

How-to Video:

(13:45 min)