Replaces

Wheel Bearing & Hub Assembly Pair TRQ BHA53773 - 1ASHS00907

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Wheel Bearing & Hub Assembly Features & Benefits:
      Direct Fit Replacement
      Precision Engineered
      Highest Quality Materials
  • Bearing Type:   Ball Bearing
  • Quantity:   Pair

Specifications:

  • 3 Bolt Flanges
  • Fits 5 Lug Wheels

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

BHA54117 Axle / Spindle Nut Torque Specification

  1. step : Removing the Wheel (0:25)
    • Pry out the center cap with a pick
    • Loosen the 35mm hub nut with a breaker bar
    • Loosen the 22mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Hub Nut (1:37)
    • Spray rust penetrant in the hub nut
    • Loosen the 35mm nut
    • Thread the nut on a few threads
    • Tap the nut with a mallet to loosen the axle
  3. step : Removing the Brakes (2:37)
    • Loosen the 14mm caliper bolts
    • Secure the caliper with a bungee cord
    • Remove the 18mm caliper bracket bolts
    • Remove the caliper bracket and the pads
    • Remove the T30 Torx bolt from the rotor
    • Remove the rotor
  4. step : Removing the ABS Sensor (4:25)
    • Remove the 10mm bolt from the ABS sensor
    • Remove the ABS sensor
  5. step : Removing the Hub (4:50)
    • Remove the three 13mm bolts from the hub
    • Tap the hub out from the knuckle
    • Remove the hub from the axle
  6. step : Installing the New Hub (7:06)
    • Clean any corrosion from the axle splines with brake cleaner and a wire brush
    • Apply anti-seize grease around the knuckle cavity
    • Slide the hub over the axle
    • Tighten the three 13mm bolts to the hub
    • Torque the bolts to 74 foot-pounds
  7. step : Reinstalling the ABS Sensor (9:17)
    • Insert the ABS sensor into place
    • Tighten the 10mm bolt to the ABS sensor
  8. step : Reinstalling the Axle Nut (9:51)
    • Thread the axle nut on by hand
    • Tighten the 35mm axle nut
  9. step : Installing the Caliper Bracket and Rotor (10:15)
    • Insert the rotor to the hub
    • Tighten the T30 Torx bolt to the rotor
    • Put the caliper bracket back into place
    • Start the 18mm bolts by hand
    • Tighten the bolts to 140 foot-pounds of torque
  10. step : Installing the Brake Caliper (11:17)
    • Press the metal clip to the brake pad
    • Put an old pad in the caliper
    • Apply grease to the brake pad tabs
    • Use a large C-clamp and the old pad to push the pistons back if needed
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Thread bolts by hand
    • Tighten the 14mm bolts to 20 foot-pounds
    • Clean the rotor with brake parts cleaner or mineral spirits
  11. step : Reattaching the Wheel (11:54)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 125 foot-pounds in a crossing or star pattern
    • Torque the hub nut to 151 foot-pounds
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Jack Stands
  • Rubber Mallet
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Brake Parts Cleaner
  • Paper Towels
  • Bungee Cord
  • Anti-Seize Grease

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • Swivel
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 35mm Socket
  • 14mm Socket
  • 18mm Socket
  • 10mm Socket

  • Torx Drivers & Sockets

  • T30 Torx Driver

4.78/ 5.0
9 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
8
0
1
0
0
Hub assembly works as it should!
Very happy with my order from A1 Auto, ordered the parts came in fast 3 days as quoted. With help from their videos put on both sides, my loud growling sounds on highway speeds are gone, so did a brake noise that had a ratcheting sound when the brakes were applied. ( a dealer quoted me $800 for a repair saying it was due to my aftermarket ac delco brakes from another site) which it was not even the issue. Very happy with purchase and will buy again in future.. Eddie
October 22, 2017
Love the price works great
Ordered these parts for my 2013 chevy malibu, had a abs light on and a traction control light on. This fixed the problem, however the install took 3hrs do to the fact the old assembly was on pretty tight. Will be ordering from these guys again
November 20, 2017
Awesome product!!
I could not be happier with my wheel bearings! The price was unbeatable and they were excellent quality! I am now a loyal customer!
February 25, 2018
2013 Chevy Malibu
Very pleased. Parts were as described and arrived earlier than expected. Will do business again.
April 16, 2018
Very Great Product
These are Great Wheel Bearings for half the price at the local Auto Parts Stores!
June 27, 2018
Hubs
Very happy with your product easy to install and you back your product up very happy I tell everyone about you thank you
July 19, 2018
Wheel bearing hub assembly
The wheel bearing hub assembly that I ordered was a perfect fit and very speedy delivery. Ive trusted 1A Auto with a lot of parts and Ive never had a complaint yet
July 30, 2018
Great quality rear wheel bearings, and fast shipping!!
I received these bearings fast within a few days, wasnt even ready to install them yet when they came in the mail, but when I got time to putting these in they were great quality better than oem and for the price of a single one, it was just common sense to do both rears which ended up needing it because the old ones had a ticking sound and with these new ones it so quiet, I would definitely buy again!!
September 11, 2018
perfect
fit perfect, noise is gone on my 2013 Malibu ltz, great price and fast shipping.
October 7, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
does the wheel bearing assembly come with the abs tone ring?
Dan C August 6, 2016
No I had to use the old one.
Elzie T August 6, 2016
No sir.
Joseph H August 6, 2016
Is this part for vehicles with ABS brake systems?
Timothy T June 22, 2017
I have a 2010 Equinox with ABS it worked on it.
Elzie T June 22, 2017
No, this Hub Assembly does not use the ABS system.
Vernell W June 22, 2017
This will work on models with ABS, however the ABS sensor is located in a different location but uses a ring on the bearing to sense the speed.
Alex P June 22, 2017
is removal and assembly the same for the rear wheel as front wheel with exception to the drive shaft on the front?
Joe O February 11, 2018
Year Make Model Description
2010Buick Allure Buick Allure Wheel Bearing & Hub Assembly Pair Rear TRQ
2010Buick Allure Buick Allure Wheel Bearing & Hub Assembly Pair Front TRQ
2010-2016Buick LaCrosse Buick LaCrosse Wheel Bearing & Hub Assembly Pair Rear TRQ
2010-2016Buick LaCrosse Buick LaCrosse Wheel Bearing & Hub Assembly Pair Front TRQ
2011-2016Buick Regal Buick Regal Wheel Bearing & Hub Assembly Pair Front TRQ
2014-2016Cadillac CTS Cadillac CTS All Wheel Drive Wheel Bearing & Hub Assembly Pair Front TRQ
2013-2016Cadillac XTS Cadillac XTS Wheel Bearing & Hub Assembly Pair Rear without Heavy Duty Brakes TRQ
2013-2016Cadillac XTS Cadillac XTS Wheel Bearing & Hub Assembly Pair Front without Heavy Duty Brakes TRQ
2010-2016Chevy Equinox Chevy Equinox Wheel Bearing & Hub Assembly Pair Front TRQ
2014-2017Chevy Impala Chevy Impala Wheel Bearing & Hub Assembly Pair Front TRQ
2013-2016Chevy Malibu Chevy Malibu Wheel Bearing & Hub Assembly Pair Front TRQ
2013-2016Chevy Malibu Chevy Malibu Wheel Bearing & Hub Assembly Pair Rear TRQ
2010-2016GMC Terrain GMC Terrain Wheel Bearing & Hub Assembly Pair Front TRQ
2010-2011Saab 9-5 Saab 9-5 Wheel Bearing & Hub Assembly Pair Front TRQ
2010-2011Saab 9-5 Saab 9-5 Wheel Bearing & Hub Assembly Pair Rear TRQ
Part #: 1ASHS00907


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

TRQ
Brand #: BHA53773

How-to Video:

(13:18 min)