Wheel Bearing & Hub Assembly Pair TRQ BHA53438 - 1ASHS00177

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Wheel Bearing & Hub Assembly Features & Benefits:
      Direct Fit Replacement
      Precision Engineered
      Highest Quality Materials
  • Bearing Type:   Ball Bearing
  • Quantity:   Pair


  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Direct replacement
  • Replaces dealer part numbers: 22701520
  • 3 Bolt Flange
  • Fit 4 Lug Wheels
  • New wheel studs already installed
  • Fit models without ABS (Anti-Lock Brakes)

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm -

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

BHA53986 Axle / Spindle Nut Torque Specification

  1. step : Removing the Wheel (1:04)
    • Loosen the caps and remove the wheel cover.
    • Remove the 30mm lug nut in the center of the wheel.
    • Loosen the other lug nuts.
    • Jack the car up and remove the lug nuts.
    • Pull the wheel off.
  2. step : Removing the Brakes (1:49)
    • Using a screwdriver pry the caliper from the rotor.
    • Remove the two 14mm bolts on the back of the caliper.
    • Pull the caliper off and set it aside.
    • Pry the pads off.
    • Remove the two 15mm bolts securing the caliper bracket (Use breaker bar or pipe for leverage).
    • Remove the caliper bracket.
    • Remove the rotor.
  3. step : Removing the Hub (3:10)
    • If the axel doesn't just push out hit it once with a hammer.
    • Remove the three bolts securing the hub.
    • Disconnect ABS harness if the vehicle has this.
    • Hit the side of the hub with a hammer to loosen it up.
    • Pull the hub free.
  4. step : Replacing the Hub (5:11)
    • Line the new hub with the back plate.
    • Reconnect the ABS harness if the vehicle has this.
    • Replace the three bolts that secure the hub. 70 – 75ft/lbs.
    • Replace the washer and nut on the hub.
  5. step : Replacing the Brakes (7:00)
    • Put the rotor in place and hold it on with one lug nut.
    • Put the caliper bracket back into place.
    • Replace the caliper bolts. 75 – 80 ft/lbs.
    • Put the brake pads back into place.
    • Replace the caliper and caliper bolts. Tighten to 20 – 22ft/lbs.
  6. step : Replace the Wheels (7:43)
    • Remove the lug nut.
    • Put the wheel into place.
    • Replace the lug nuts.
    • Lower the vehicle and tighten the lug nuts to 100ft/lbs.
    • Tighten the center nut to 155ft/lbs.
    • Replace the hub cap if this applies.
  7. step : Prepare the Brakes (8:37)
    • Pump the Brakes until they are firm before road testing.
    • Test stop from 5 then 10 mph.

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Hammer

  • Ratchets & Related

  • Socket Extensions
  • 1/2 Inch Breaker Bar
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 15mm Socket
  • 30mm Socket
  • 18mm Socket
  • 16mm Socket
  • 17mm Socket
  • 14mm Socket
  • 19mm Socket

4.50/ 5.0
12 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
so I am well satisfied with the wheel bearing & hub assembly with them and was happy with the price. I have purchased a few other items and well satisfied with them.
February 12, 2017
No longer singing
My old bearings were singing away and I replaced them on 6/28 with 1A auto bearings and so far they are fine. I have put about 300 miles on them so far. At this point I would recommend them to others especially with a lifetime warranty, thats what I was mainly looking for.
July 11, 2017
Great Product
Great product!!! Easy to install with your sweet videos. It feels like a new car!!!
July 20, 2017
Customer Rep ordered me the wrong part!
So, I needed this urgently because I was told my bearings were about to go out. But when I tried to order this (the 5 lug,) i accidentally typed the billing address wrong, and couldnt figure out what happened. So after waiting on hold for about 20 minutes, I was greeted and was given help. She even offered to just order the part for me over the phone. After I told her the part number and described which one I wanted. She found it and ordered it, but when it got here it was a 4 lug, when I told her I needed the 5 lug bearings. Im not happy, and now Im not even sure I can get a refund and return them
September 12, 2017
wheel bearings
good quality. will buy again. Im very satisfied with this product
February 18, 2018
Wheel bearing hubs 2007 chevy colbalt
Great pricing good quality parts ordering was easy will absolutely buy from them in the future my only complaint is shipping took a little longer than I would have liked it too I ordered parts on a Tuesday and the parts didnt show up until the next Monday but no big deal I will just adjust my orders in the future but you cant beat their pricing and quality of parts
February 20, 2018
Quiet wheels now
I was going to replace my old bearings with a new set because of the noise when I hit the highway, however my jack was weak and so much rust on my wheels that I had my cousin do it. The sound on the highway is quiet and the ride is smooth. Satisfied completely.
February 23, 2018
Great service
I got these exactly when expected. I shopped around before buying and this was the best price that I found. The tutorial video was great and I replaced them myself with no issues. I have made a few purchases from 1A Auto in the past 6 months and they are now the first place I look for parts and helpful videos!
April 16, 2018
Good Quality
Perfect fit, no issues at all. Seem to be good quality part. The how to video helped a lot.
April 29, 2018
A1 is the best
Great prices and parts. Easy to navigate the website and delivery is fast! I have used them several times and have not been disappointed
August 7, 2018
Friendly ordering supported stuff very helpful Ordered my wheel bearings got it very fast I will continue ordering for my car as long as i have it Thanks 1a auto your awsume
September 30, 2018
Fats shipping and great video
I always rely on 1AAuto to have the part I need for my vehicles and the install videos are life savers. I rate them excellent in all facets of their business.
October 21, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
You dont need to grease the splines?
Doug H August 28, 2016
NO, its a sealed bearing. I give it 4 stars.
Benjamin P August 28, 2016
No everything was greased and ready to go. They are sealed bearings
Stephanie K August 28, 2016
I use a little grease on splines it will help the shaft slide on easier
Charles S August 28, 2016
Its not necessary but if you feel the need you can add a light amount for ease of assembly.
Daniel W August 28, 2016
No , no need for grease
Marsalis S August 28, 2016
You dont have to grease them but it makes it easier for the next person that has to change them..
Robert V August 29, 2016
A light coat of grease or even anti-seize on the splines is fine.
Brian F August 29, 2016
No, you dont have grease the splines.
Darren R August 30, 2016
No, they are self contained
George K August 8, 2018
Year Make Model Description
2005-2009Chevy Cobalt Chevy Cobalt Front Wheel Bearing & Hub Assembly Pair for Models with 4 Lug Wheels without ABS Brakes
2007-2009Pontiac G5 Pontiac G5 Front Wheel Bearing & Hub Assembly Pair for Models with 4 Lug Wheels without ABS Brakes
2005-2006Pontiac Pursuit Pontiac Pursuit Front Wheel Bearing & Hub Assembly Pair for Models with 4 Lug Wheels without ABS Brakes
2003-2007Saturn Ion Saturn Ion Front Wheel Bearing & Hub Assembly Pair for Models with 4 Lug Wheels without ABS Brakes
Part #: 1ASHS00177

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Brand #: BHA53438

How-to Video:

(09:02 min)