Replaces

Wheel Bearing & Hub Assembly Pair TRQ BHA53318 - 1ASHS00025

Part Details

  • Wheel Bearing & Hub Assembly Features & Benefits:
    Direct Fit Replacement
    Precision Engineered
    Highest Quality Materials
  • Bearing Type: Ball Bearing
  • Quantity: Pair

Specifications:

  • Comes as a PAIR
    • Fits both the LH (Driver Side) & RH (Passenger Side) FRONT
  • Includes lug nut studs already installed, ABS Sensors, and ABS Sensor Wire Harnesses
  • 3 Bolt Flanges
  • Direct replacements
  • Built to strict quality control standards

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

BHA53914 Axle / Spindle Nut Torque Specification

  1. step : Remove the wheel and tire (1:18)
    • Raise and secure the vehicle.
    • Remove the lug nuts and then the wheel.
  2. step : Remove Caliper (2:07)
    • Turn wheels all the way in the opposite direction of the side you are working on.
    • Use your 13mm socket wrench to remove the caliper bolts.
    • Use a wire tie to help prevent stress on the caliper.
    • Use your 18mm socket to remove the brackets.
  3. step : Remove brake disk (4:13)
    • Take care not to touch the disk, and if you do make sure to clean it with rubbing alcohol or mineral spirits.
  4. step : Remove Hub (4:42)
    • Use a 35mm socket to remove the hub nut.
    • Give the axle a slight tap with a hammer to loosen it.
    • Remove the 3 bolts securing the hub using your 18mm socket and extension and ratchet or breaker bar.
    • You can use penetrating oil to help.
    • Disconnect your ABS sensor.
    • Use a rubber mallet to break your hub free, and work around the flange with the hammer to pull it off.
    • Remove the hub and shield.
    • Clean up any corrosion with a wire brush.
  5. step : Install new hub (9:10)
    • Use some penetrating oil to prep the knuckle for the new hub.
    • Put the three 18 mm bolts in place and tighten the nuts to 90 ft lbs.
    • Reinstall the ABS harness.
    • Tighten but don't torque the lug nut.
  6. step : Put brakes and wheel back on (11:50)
    • Remember to replace the lug nuts on in a star pattern.
    • Lug nuts tighten to 100-120 ft lbs
    • Hub nut is 103 ft lbs.
    • Make sure to check your brakes and steering before driving again.
    • Make sure to pump the brakes and seat your rotors.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands
  • Large C-Clamp
  • Rubber Mallet
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease
  • Rust Penetrant
  • Wire Ties

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 18mm Socket
  • 19mm Socket
  • 35mm Socket

4.7 / 5.0
58 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
49
5
2
0
2
John Rivera ??
1A Auto is one of the best Wholesale Parts Parts at a reasonable price and I'll continue to shop here until further notice
September 12, 2018
Purchased
4 weeks ago
As Advertised
The parts where as advertised. They were here very fast and just what I needed for my GMC Envoy. My first time with A1 but not my last.
September 12, 2018
Purchased
1 month ago
GRATE SERVICE AND PART WITH AN APPROPRIATE SALES FEE … THANK YOU FOR YOUR SERVICE
September 5, 2018
Purchased
1 month ago
Happy
The part worked fine for me the only thing it says you need a 36 metric wanted to 35 metricWrite your review here. It must be at least 50 characters long. Consider whether you would recommend this product and what you like or dislike about it.
August 22, 2018
Purchased
1 month ago
Very fast shipping ;)
This was my first purchase from 1A Auto and was pleasantly surprised when it came in the mail 2 days after I placed the order. Will definitely order again in the future!!
August 15, 2018
Purchased
1 month ago
Great value
I have matched part up to OEM. Based on previous purchases I have high certainty of a perfect fit. My air compressor needs to be reinstalled before I start the replacement of my old hubs. I find the best part of dealing with and supporting !A Auto is their high quality installation videos. This part is covered in a video being installed on a truck identical to mine.
August 7, 2018
Purchased
2 months ago
Quality
I brought wheels bearing and wheels pad , I have no problem when I installed them and everything is running smoothly
July 10, 2018
Purchased
3 months ago
Best parts best price
I would highly recommend,1a auto,and the hub assembly to anyone your average do it your selfer or your seasoned mechanic you can't beat the price quality shipping and over all satisfaction of the shopping experience with 1 a auto will be purchasing many products. Thanks for your service ,
Cody
July 9, 2018
Purchased
3 months ago
Great parts - perfect fit
Got this pair of front wheel bearing assemblies for my 2006 GMC Envoy that was making noise and ABS was coming on a low braking speeds. Parts were a perfect fit and solved the problems. Now a quiet ride and no premature ABS engagement. Great price and quick delivery.
July 8, 2018
Purchased
3 months ago
order two hub bearing assemblys
ordering the bearings was easy and for me that is a big thing , i am up there in age and not to computer smart. placed the order and was surprised to receive it a few days later priced right to.
June 23, 2018
Purchased
3 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 5 questions Browse 5 questions and 8 answers
Will these work with the trailblazer ss AWD it's a 2006?
Sparky on Feb 5, 2016
BEST ANSWER: Hello, Yes this kit will work fine on your model application.
Where our these made?
Cheryl C on Oct 31, 2017
BEST ANSWER: I bought and installed these with the help of the videos. They work better than the OEM. Who cares where they are made. Seriously, easy to instal, work better than advertised. Incredible price. No reason to care if they come from high dollar union labor or sweat shop in India.
I recently purchased an axle assembly. I would like to know if there’s a specific wheel hub and bearings I need to go with it? 2007 Chevy Trailblazer LS
Prince on Feb 14, 2018
BEST ANSWER: 02 to 09 envoy trailblazer n several other model and make vehicles use the same hub
Will these fit my 04 Chevy trailblazer? It is the v6 4.2l and is 4x4 but is not all time 4x4!
Mikey on Dec 15, 2016
BEST ANSWER: This will fit your model application as shown. You have CV axles on the front so you need the splined hubs on the front for your 4WD/AWD system to operate. Engine size is not relevant here
Will this fit the v8 chevy trailblazer model?
Doug G on May 19, 2016
BEST ANSWER: Yes, this will fit the 2002-2009 Chevy Trailblazer, it is not specific to engine size.

Vehicle Fit

Year Make Model Description
2004-2007Buick Rainier Buick Rainier Front Wheel Bearing & Hub Assembly Pair TRQ
2003-2006Chevy SSR Chevy SSR Front Wheel Bearing & Hub Assembly Pair TRQ
2002-2009Chevy Trailblazer Chevy Trailblazer Front Wheel Bearing & Hub Assembly Pair TRQ
2002-2006Chevy Trailblazer EXT Chevy Trailblazer EXT Front Wheel Bearing & Hub Assembly Pair TRQ
2002-2009GMC Envoy GMC Envoy Front Wheel Bearing & Hub Assembly Pair TRQ
2002-2006GMC Envoy XL GMC Envoy XL Front Wheel Bearing & Hub Assembly Pair TRQ
2004-2005GMC Envoy XUV GMC Envoy XUV Front Wheel Bearing & Hub Assembly Pair TRQ
2003-2007Isuzu Ascender Isuzu Ascender Front Wheel Bearing & Hub Assembly Pair TRQ
2002-2004Oldsmobile Bravada Olds Bravada Front Wheel Bearing & Hub Assembly Pair TRQ
2005-2009Saab 9-7X Saab 9-7X Front Wheel Bearing & Hub Assembly Pair TRQ

This part replaces:

  • Hollander 538-01587
  • TRQ BHA53318
  • OE # 15130858
  • OE # 12413037
Part #: 1ASHS00025


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

TRQ
Brand #: BHA53318

How-to Video:

(13:45 min)