Replaces

Wheel Bearing & Hub Assembly Pair TRQ BHA53298 - 1ASHS00002

Specifications:

  • Comes as a Pair
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Have ABS sensors
  • 3 Bolt Flanges
  • Fit 6 Lug Wheels
  • Wheel studs already installed
  • Direct replacements
  • Built to strict quality control standards
  • Fit 4WD (4 Wheel Drive) or AWD (All Wheel Drive) Models

Quality

  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both Bizrate.com and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
  • You don't want to be delayed by a defective part. 1A Auto wheel hubs & bearings are all tested prior to shipping.

Fit Guaranteed

  • These hub & bearing sets will install just as your originals do. You can use your existing hardware.
  • Save time and money with direct fit hub bearing assemblies. No trips to the auto parts store or extra time trying to match up and press bearings.
  • Hub installation is a degree more difficult than changing a tire on most vehicles.

Value

  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.
Precision Engineered

From the highest grade SAE 1055 / 65Mn high carbon steel to exact OEM design.

100% Factory tested to precise OEM tolerances.

Highest Quality Materials

High quality, multi-lip seal reduces the intrusion of dirt and water. Heavy duty grease resists high temperature, moisture, and reduces intense friction.

Direct Fit Replacement

Guaranteed to fit and function correctly for your specific application.

Part Details

  • Quantity: Pair

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

BHA53891 Axle / Spindle Nut Torque Specification

  1. step : Removing the Wheel (0:52)
    • Loosen the lug nut covers with a 22mm socket
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Caliper Bracket (1:17)
    • Remove the T55 Torx bolts from the caliper
    • Use either a C-clamp to squeeze the caliper to push the caliper piston in
    • Remove the caliper
    • Pry the brake pads off with a flat blade screwdriver
    • Use a piece of pipe and ratchet to remove two 18mm bolts from the caliper bracket
    • Slide the rotor off
  3. For the third step, if you do not have air tools you can either loosen the center hub nut before you take your brakes apart by having somebody hold the brakes, or you can use a large bar, put it between the lug studs to hold it, and break the bar.

  4. step : Removing the Hub (2:58)
    • Disconnect the ABS harness from the frame and steering spindle by removing the clips
    • Pry off the center hub cap using a flat blade screw driver and hammer
    • Remove the center hub nut with an impact wrench and air blow gun
    • Remove the three 15mm hub bolts with two 15mm wrenches
    • Twist the hub nut a quarter of the way
    • And hammer from the back of the hub
    • Remove the hub nut and pull the hub out
  5. step : Installing the New Hub (5:06)
    • Place the backing plate onto the hub
    • Push the hub back into place
    • Insert and tighten the 15mm hub bolts
    • Torque the 15mm hub bolts to 75 ft/lbs
    • Remove the clip and feed the ABS harness back into place
    • Replace the clips and brackets to the ABS harness
    • Replace center hub nut and washer
    • Tighten the center hub nut
  6. step : Replacing the Caliper Bracket (6:46)
    • Place the rotor on the hub
    • Twist a lug nut to hold the rotor in place
    • Put the caliper on
    • Replace and tighten the 18mm bolts
    • Torque the 18mm bolts to 75 ft/lbs
    • Install the new brake pads into the bracket, tapping lightly with a hammer
    • Grease the caliper bolts
    • Place the caliper onto the bracket
    • Replace and tighten the T55 Torx bolts
    • Torque the bolts to 30 ft/lbs
  7. step : Reinstalling the Wheel (8:46)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the 22mm bolts
    • Tighten the lug nuts to 100 ft/lbs in a crossing or star pattern
    • Torque the center hub nut to a 125 ft/lbs
    • Reattach the center cap
  8. step : Testing the Brakes (9:33)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    Allen Wrenches

  • 5mm Allen Wrench

  • General Tools

  • Hammer
  • Jack Stands
  • Large C-Clamp

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 18mm Socket
  • 22mm Socket
  • 35mm Socket

  • Torx Drivers & Sockets

  • T55 Torx Socket

  • Wrenches - Metric

  • 15mm Wrench

4.9 / 5.0
112 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
103
7
1
1
0
good quality
installed on my truck
fit great
great product and price
July 13, 2018
Purchased
3 months ago
Wheel bearing and hub
Exactly what was advertised and received in less than 3 days. Installed easy and are working absolutely fine.
July 6, 2018
Purchased
4 weeks ago
My experience with 1a auto
My shopping experience was Awesome. Very easy to make an order and find the parts I exactly need. I am very impressed with the system.
June 30, 2018
Purchased
2 months ago
Great Price
O must say that I am very satisfied with the product and it was the best move I have made. This company has really earned my business. Everything that I expected from them.. they delivered the way they said that they would...
June 22, 2018
Purchased
1 month ago
Easy & smooth
The parts were easy to install and the truck rides smooth and quiet now.
June 22, 2018
Purchased
1 month ago
2002 TAHOE 4WD FRONT BEARING & HUB
The front bearing and hub went on my 2002 Tahoe 4 wheel drive perfectly. It has been functioning for a couple months now as expected. The product appears to have good quality and had all that was necessary to install properly.
June 8, 2018
Purchased
2 months ago
Great
Perfect fit like a glove. I will definitely be ordering again.
June 2, 2018
Purchased
2 months ago
So Far So Good
I was going to send my wife to town to have a mechanic do this job. The video provided great tips and made the job go well. The only thing I would caution is to be sure you have a torque and use application specific torque. The directions can be confusing on this as it said 125 ft lbs and it was actually much higher (which was in video.) Reviews of other wheel bearings stressed importance of proper torque. 500 miles in all is still well.
May 29, 2018
Purchased
2 months ago
Great Hub so far
This hub fit just like OEM. We did not take apart the brakes like it shows in the video. We just pulled the whole thing off to the side.
May 25, 2018
Purchased
2 months ago
Have have not installed them yet but I'm pretty sure they will do their job as intended soon I'll be buying some for the rear axles of my vehicle
May 20, 2018
Purchased
2 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 13 questions Browse 13 questions and 43 answers
Are bearings pre-greased?
John R on Aug 20, 2015
BEST ANSWER: Yes, they are seal bearings in the hub assy. Tip, very hard getting old bearing assy out, watch you tube that shows knocking out a lug nut, and then using a long bolt and nut to press out old bearing assy. Works great, otherwise old bearing is hard to get out.
who makes the bearing ?
jg6269 on Jan 11, 2016
BEST ANSWER: I can't remember the maker but they are a 100 % and twice as cheap as any other places I seen them and have a two year warranty other places only give you a 1 year warranty for twice the prices I am hundred % happy with them Michael Brown
Checking to see if this fits 2003 silverado 1500 4wd?
Jeff A on Aug 14, 2016
BEST ANSWER: I ordered wheel bearings and hubs for my truck and they are working just fine all my parts come from 1a auto they are the best
Checking to see if this product will fit 2004 1500 Chevy Avalanche four wheel drive?
heliperry on Apr 26, 2016
BEST ANSWER: 2002-2006 Chevy Avalanche 1500 4 Wheel Drive Front Wheel Bearing & Hub Assembly Pair

Yes, according to the information you supplied, the part you���re looking at will be correct for your vehicle. If you have any other questions or would like to place an order with one of our customer service representatives, please feel free to give us a call.
I'm sorry to ask this again but I want to sure before I order. I have a 1999 half ton silverado 4x4 regular cab short bed. Will this set work on my truck? Thank you!
Onlystatic on Sep 13, 2017
BEST ANSWER: Yes, according to the information you supplied, the part you���re looking at will be correct for your vehicle. If you have any other questions or would like to place an order with one of our customer service representatives, please feel free to give us a call.
is that price for both 89.95 ?
butch t on Jan 5, 2018
BEST ANSWER: Thanks for your question! This listing is for a pair of hubs. Thanks!
are the abs speed sensors replaceable on the TRQ wheel bearing and hub assembly ?
B K on May 30, 2018
BEST ANSWER: I honestly don't know. It came with new ones and I haven't had to replace yet. Just as easy to replace the whole hub for the price.
Do these hubs come with the abs wheel speed sensors?
Denham on May 23, 2018
BEST ANSWER: Yes, the sensor is built into the hub assembly.
Do these fit 16 inch or 17 inch wheels ?
Keith Z on Apr 18, 2018
BEST ANSWER: I know they fit 17 inch wheels but I have 24 inch wheels on my truck and they work just fine. I don't see why they wouldn't work on 16 inch wheels as long as the bolt pattern is the same.
will it fit 2008 saturn outlook?
David A on Feb 28, 2018
BEST ANSWER: Hello,
These parts won't fit your vehicle, but the link below will go to some that will. Thank you!

https://www.1aauto.com/2008-saturn-outlook-wheel-bearing-hub-assemblies/y-mo-c/2008-1386-384
What's the difference between the two 90 and 60 dollar wheel hubs for the03 silverado. Is it just quality?
Shawn R on Aug 11, 2017
BEST ANSWER: The difference would be the brand name producing the hub and bearings. Both are backed by a limited lifetime warranty.
Doe's this fit a 2005 Chevy 1500?
Ryan D on Jul 16, 2017
BEST ANSWER: Yes, as long as your Silverado 1500 is a 4WD and has 6 lug wheels.
Does it fit 2004 GMC Yukon Denali?
Ricky P on May 4, 2017
BEST ANSWER: Yes, these will fit the Denali model with AWD/4WD.

Vehicle Fit

  • 2002-2006 Cadillac Escalade All Wheel Drive Front Wheel Bearing & Hub Assembly Pair TRQ
  • 2003-2006 Cadillac Escalade ESV All Wheel Drive Front Wheel Bearing & Hub Assembly Pair TRQ
  • 2002-2006 Cadillac Escalade EXT All Wheel Drive Front Wheel Bearing & Hub Assembly Pair TRQ
  • 2002-2006 Chevy Avalanche 1500 4 Wheel Drive Front Wheel Bearing & Hub Assembly Pair TRQ
  • 2003-2013 Chevy Express 1500 Van 4 Wheel Drive Front Wheel Bearing & Hub Assembly Pair TRQ
  • 2003-2005 Chevy Express 2500 Van 4 Wheel Drive Front Wheel Bearing & Hub Assembly Pair TRQ
  • 1999-2000 Chevy Silverado 1500 4 Wheel Drive Front Wheel Bearing & Hub Assembly Pair TRQ
  • 2001-2003 Chevy Silverado 1500 4 Wheel Drive Front Wheel Bearing & Hub Assembly Pair TRQ
  • 2004-2006 Chevy Silverado 1500 4 Wheel Drive 6 Lug Wheels Front Wheel Bearing & Hub Assembly Pair TRQ
  • 2007 Chevy Silverado 1500 Classic 4 Wheel Drive 6 Lug Wheels Front Wheel Bearing & Hub Assembly Pair TRQ
  • 2000-2006 Chevy Suburban 1500 4 Wheel Drive Front Wheel Bearing & Hub Assembly Pair TRQ
  • 2000 Chevy Tahoe 4 Wheel Drive (excluding Z71 Models) Front Wheel Bearing & Hub Assembly Pair TRQ
  • 2001-2006 Chevy Tahoe 4 Wheel Drive Front Wheel Bearing & Hub Assembly Pair TRQ
  • 2003-2013 GMC Savana 1500 Van 4 Wheel Drive Front Wheel Bearing & Hub Assembly Pair TRQ
  • 2003-2005 GMC Savana 2500 Van 4 Wheel Drive Front Wheel Bearing & Hub Assembly Pair TRQ
  • 1999-2000 GMC Sierra 1500 4 Wheel Drive Front Wheel Bearing & Hub Assembly Pair TRQ
  • 2001-2003 GMC Sierra 1500 4 Wheel Drive Front Wheel Bearing & Hub Assembly Pair TRQ
  • 2004-2006 GMC Sierra 1500 4 Wheel Drive 6 Lug Wheels Front Wheel Bearing & Hub Assembly Pair TRQ
  • 2007 GMC Sierra 1500 Classic 4 Wheel Drive 6 Lug Wheels Front Wheel Bearing & Hub Assembly Pair TRQ
  • 2000 GMC Yukon (excluding Denali Models) 4 Wheel Drive Front Wheel Bearing & Hub Assembly Pair TRQ
  • 2001-2006 GMC Yukon 4 Wheel Drive Front Wheel Bearing & Hub Assembly Pair TRQ
  • 2000-2006 GMC Yukon XL 1500 4 Wheel Drive Front Wheel Bearing & Hub Assembly Pair TRQ

This part replaces:

  • Dorman 4110300
  • Hollander 538-01481
  • OE # 15102294, 15112382, 15134584, 15740291, 15863441, 15233113
  • TRQ BHA53298
Part #: 1ASHS00002

TRQ
Brand #: BHA53298

How-to Video:

(10:03 min)