Replaces

Wheel Bearing & Hub Assembly Pair Front TRQ BHA84994 - 1ASHS01203

 

 

Quality

  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both Bizrate.com and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
  • You don't want to be delayed by a defective part. 1A Auto wheel hubs & bearings are all tested prior to shipping.

Fit Guaranteed

  • These hub & bearing sets will install just as your originals do. You can use your existing hardware.
  • Save time and money with direct fit hub bearing assemblies. No trips to the auto parts store or extra time trying to match up and press bearings.
  • Hub installation is a degree more difficult than changing a tire on most vehicles.

Value

  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.
Precision Engineered

Precision Engineered using the highest grade SAE 1055 / 65Mn high carbon steel to exact OEM design.

100% Factory tested to precise OEM tolerances.

Highest Quality Materials

High quality, multi-lip seal reduces the intrusion of dirt and water, keeping grease clean for a longer bearing life.

Premium, heavy duty grease resists high temperature, moisture, and reduces intense friction pressure to help extend the life of the bearing.

Direct Fit Replacement

Direct fit replacement part is guaranteed to fit and function correctly for your specific application

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (0:51)
    • Pry off the hub cap.
    • Use your 34 mm socket and breaker bar to loosen the hub nut.
    • Loosen your lug nuts with a 19 mm socket and breaker bar.
    • Raise and secure your vehicle.
    • Remove the lug nuts and set the wheel aside.
  2. step : Remove the brakes (1:31)
    • Use your 15 mm socket to remove the bolts in the caliper bracket.
    • Use a screwdriver to compress the caliper piston.
    • Remove the caliper and tuck it up and out of the way.
    • Pry out the brake pads.
    • Remove two more 15 mm bolts to remove the caliper bracket.
    • Remove the rotor.
  3. step : Remove the Hub (4:11)
    • Hit the hub nut with penetrating oil, and remove it with your 34 mm socket.
    • Give your axle a solid tap with a hammer.
    • Remove the three bolts holding the hub to the steering knuckle.
    • Unplug the ABS sensor.
    • Remove the hub.
  4. step : Install the new hub. (6:58)
    • Plug in the ABS sensor lead.
    • Work the hub onto the axle and start your bolts.
    • Evenly tighten up the bolts, rotating through the three till they are tight enough to torque.
    • Torque the bolts to 60 ft lbs.
    • Put the hub nut on and tighten it preliminarily.
  5. step : Install the brakes (9:46)
    • Inspect your rotors and replace with new ones cleaned with brake parts cleaner if needed.
    • Use a wire brush to clean corrosion from the brake caliper bracket.
    • Bolt the bracket down with a ratchet and 15 mm socket and torque to 80 ft lbs.
    • Apply anti-seize grease to the edges of the brake pads and insert them into the caliper brackets.
    • Compress the calipers with a C-Clamp and mount it.
    • Feed the caliper bolts into place after inspecting and cleaning the bolt sleeves and torque them to 50 ft lbs.
  6. step : Put the wheel back on (13:50)
    • Hand tighten the lug nuts and lower the vehicle.
    • Torque the hub nut to 118 foot pounds.
    • Use a star pattern to torque the lug nuts to 100 ft lbs.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands

  • Ratchets & Related

  • Torque Wrench
  • 1/2 Inch Breaker Bar
  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 34mm Socket
  • 19mm Socket
  • 15mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1994-1996 Buick Century Front Wheel Bearing & Hub Assembly Pair with (1) 34mm Axle Nut Socket TRQ
  • 1992 Buick LeSabre with ABS Brakes Front Wheel Bearing & Hub Assembly Pair with (1) 34mm Axle Nut Socket TRQ
  • 1993-1999 Buick LeSabre Front Wheel Bearing & Hub Assembly Pair with (1) 34mm Axle Nut Socket TRQ
  • 1992-1996 Buick Park Avenue Front Wheel Bearing & Hub Assembly Pair with (1) 34mm Axle Nut Socket TRQ
  • 1992-1996 Buick Riviera Front Wheel Bearing & Hub Assembly Pair with (1) 34mm Axle Nut Socket TRQ
  • 1993 Cadillac Allante Front Wheel Bearing & Hub Assembly Pair with (1) 34mm Axle Nut Socket TRQ
  • 1992-1993 Cadillac Deville with ABS Brakes Front Wheel Bearing & Hub Assembly Pair with (1) 34mm Axle Nut Socket TRQ
  • 1994-1996 Cadillac Deville Front Wheel Bearing & Hub Assembly Pair with (1) 34mm Axle Nut Socket TRQ
  • 1992-1996 Cadillac Eldorado Front Wheel Bearing & Hub Assembly Pair with (1) 34mm Axle Nut Socket TRQ
  • 1992-1993 Cadillac Fleetwood Front Wheel Drive with ABS Brakes Front Wheel Bearing & Hub Assembly Pair with (1) 34mm Axle Nut Socket TRQ
  • 1992-1994 Chevy Lumina APV 16.25mm Lug Hole Front Wheel Bearing & Hub Assembly Pair with (1) 34mm Axle Nut Socket TRQ
  • 1995-1996 Chevy Lumina APV Front Wheel Bearing & Hub Assembly Pair with (1) 34mm Axle Nut Socket TRQ
  • 1992 Olds 88 with ABS Brakes Front Wheel Bearing & Hub Assembly Pair with (1) 34mm Axle Nut Socket TRQ
  • 1993-1999 Olds 88 Front Wheel Bearing & Hub Assembly Pair with (1) 34mm Axle Nut Socket TRQ
  • 1992 Olds 98 with ABS Brakes Front Wheel Bearing & Hub Assembly Pair with (1) 34mm Axle Nut Socket TRQ
  • 1992 Olds 98-Regency with ABS Brakes Front Wheel Bearing & Hub Assembly Pair with (1) 34mm Axle Nut Socket TRQ
  • 1995-1996 Olds Aurora Front Wheel Bearing & Hub Assembly Pair with (1) 34mm Axle Nut Socket TRQ
  • 1994-1996 Olds Cutlass Ciera (1) 34mm Axle Nut Socket Wheel Bearing & Hub Assembly Pair Front with TRQ
  • 1992 Olds Delta 88 with ABS Brakes Front Wheel Bearing & Hub Assembly Pair with (1) 34mm Axle Nut Socket TRQ
  • 1993-1999 Olds Delta 88 Front Wheel Bearing & Hub Assembly Pair with (1) 34mm Axle Nut Socket TRQ
  • 1992 Olds Delta 88-Royale with ABS Brakes Front Wheel Bearing & Hub Assembly Pair with (1) 34mm Axle Nut Socket TRQ
  • 1993-1999 Olds Delta 88-Royale Front Wheel Bearing & Hub Assembly Pair with (1) 34mm Axle Nut Socket TRQ
  • 1992 Pontiac Bonneville with ABS Brakes Front Wheel Bearing & Hub Assembly Pair with (1) 34mm Axle Nut Socket TRQ
  • 1993-1999 Pontiac Bonneville Front Wheel Bearing & Hub Assembly Pair with (1) 34mm Axle Nut Socket TRQ

This part replaces:

  • TRQ BHA84994
Part #: 1ASHS01203



TRQ
Brand #: BHA84994

How-to Video:

(14:41 min)