Wheel Bearing & Hub Assembly Pair Front TRQ BHA53492 - 1ASHS00351

Part Details

  • Wheel Bearing & Hub Assembly Features & Benefits:
    Direct Fit Replacement
    Precision Engineered
    Highest Quality Materials
  • Bearing Type: Tapered Roller Bearing
  • Quantity: Pair
  • Front or Rear Location: Front


  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • 4 Bolt Rectangular Flanges
  • Fit 6 Lug Wheels
  • Replaces dealer part number: 7L3Z-1104-A, 7L3Z1104A
  • Have ABS (Anti Lock Brakes) sensors already installed
  • Direct replacements
  • Built to strict quality control standards
  • Fit 4WD (Four Wheel Drive) Models only

Note: For 2005 models you can find the production date of your vehicle on either the outer edge of the driver's front door or on the latch piller that the door closes on.

What are Tapered Bearings and Why Use Them?

Tapered bearings are better than roller ball bearings at handling forces exerted on the bearing during cornering (known as axial load) in trucks and large cars. 

Roller ball bearings have spherical ball bearings between two straight rings (called races). Tapered bearings use tapered rollers shaped like flat-topped cones and two races angled from the outside to the inside of the bearing. The greater the angle, the more axial load the bearing can handle.

Your model came from the factory with tapered bearings. This type of bearing handles cornering forces better for trucks and large cars. Roller ball bearings work well for smaller cars, but replacing a tapered bearing with a roller ball bearing will result in increased wear and faster failure.


Item Condition: New

WARNING: Cancer and Reproductive Harm -

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:42)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the 21mm lug nuts with the vehicle on the ground
    • Remove the hub cap with pliers
    • Loosen the 13mm nut
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:32)
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Remove the 13mm bolts from the brake caliper
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
  3. step : Removing the Brake Rotor (2:32)
    • Remove the 18mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Thread a nut onto the rotor
    • Hit the rotor with a hammer
    • Pull the rotor off
  4. step : Removing the Hub (2:58)
    • Disconnect the ABS harness sensor
    • Remove the ABS from the harness on the bracket
    • Remove the four 18mm bolts from the hub
    • Remove the 13mm hub nut, making sure you can push the nut in and out
    • Twist in an 18mm bolt to the hub
    • Remove the hub
  5. step : Installing the Hub (4:42)
    • Grease the set of bearings inside the new hub with bearing grease
    • Apply a light coat of bearing grease to the engaging wheel for the 4WD
    • Insert the hub into place
    • Tighten the 18mm bolts to the hub
    • Tighten the 18mm bolts to 95 foot-pounds of torque
    • Replace and tighten the 13mm hub nut
    • Tighten the 13mm bolt to 20 foot-pounds of torque
    • Push the ABS wire into its respective brackets
    • Replace the hub cap
  6. step : Installing the New Brake Rotor (6:41)
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
    • Adjust the emergency brake, if necessary
    • Put the bracket back into place
    • Start the 18mm bolts by hand
    • Tighten the bolts to 95 foot-pounds of torque
  7. step : Installing the New Brake Pads (7:24)
    • Put the caliper on
    • Thread the 13mm bolts by hand
    • Tighten bolts to 25 foot-pounds
    • Remove the lug nut from the rotor
  8. step : Reattaching the Wheel (8:55)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 110 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Connect the ABS sensor
  9. step : Testing the Brakes (9:42)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Torque Wrench
  • A Piece of Pipe (for leverage)
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 21mm Socket
  • 18mm Socket

4.6 / 5.0
11 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Seems alright
Parts case pretty well packaged. Had no issues putting the new hubs on. Fitment was spot on, it’s a cheap hub though so don’t expect a forever bearing.
April 9, 2018
6 months ago
Good Serivice
Very happy with your Services and Prompt Shipment, the Part went on perfectly no problems at all very satisfied thank you, I will continue getting parts from you and again thank you.
April 2, 2018
6 months ago
2008 Ford F-150 4x4 front wheel hubs
It was a perfect fit and the video installation was a great help!!
March 30, 2018
6 months ago
So far so good
I bought these bearings, as well as 4WD vacuum actuators, for an 07 Ford f150. Installation went very smooth. My only complaint is that 1A Auto does not include the hardware needed for installation. I had to use the old bolts and nuts, which isn't necessarily a bad thing but I would have preferred to replace everything with new parts. It has only been two weeks since installation and things seem great. I will update after some time has passed.
January 30, 2018
8 months ago
Great Stuff
Perfect fit. Arrived in three days with free shipping. And got two for $10 more than my LPS wanted for one!

After reading the crappy reviews about the Duralast brand (AutoZone), I decided to take a chance with 1A Auto.

Very happy, and will definitely be back!
September 23, 2017
1 year ago
2008 F150 hub assembly
Hubs arrived quickly. Replacements from 1A matched OEM's perfectly and went on without an issue. How-to Video from 1A made the job easy. Thanks to 1A I saved over $500 in parts and labor.
August 2, 2017
1 year ago
07 F150 wheel bearings (front)
Great price & great video for a do it yourself person like me. Had no trouble replacing them after watch the video. Definitely will order more parts from them in the future
July 30, 2017
1 year ago
F150 front hub
Shipped fast, part fit great, well worth it, will definitely buy from 1a auto again
June 21, 2017
1 year ago
Simple, Fast and Very Satisfied
Ordering was very Simple and easy to complete. Shipping was Fast with my parts arriving in only a few days. The parts were an exact fit, making the entire process Very Satisfying.
May 15, 2017
1 year ago
Wheel bearing
I had a wheel bearing fit perfect. I had no trouble with the assembly, or shipping. This is a review from a guy who likes to save money and do things himself.
February 23, 2017
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 6 answers
Would I need to purchase the break rotors separate?
Ethan R on Mar 1, 2016
BEST ANSWER: The brake rotor is separate from the wheel hub assembly. It would have to be purchased separately.
Does it come with locking assembly?
James S on Apr 10, 2017
BEST ANSWER: You will need to reuse the manual locking hub, or the auto locking hub and actuators. This is just going to be the wheel hub and bearing.

Vehicle Fit

Year Make Model Description
2005Ford F150 Truck Ford F150 Truck 4 Wheel Drive Front for Models with 6 Lug Wheels Wheel Bearing & Hub Assembly Pair (Built After 11/28/04 Production Date) TRQ
2006-2008Ford F150 Truck Ford F150 Truck 4 Wheel Drive Front for Models with 6 Lug Wheels Wheel Bearing & Hub Assembly Pair TRQ
2006-2008Lincoln Mark LT Lincoln Mark LT 4 Wheel Drive Front Wheel Bearing & Hub Assembly Pair TRQ

This part replaces:

  • TRQ BHA53492
Part #: 1ASHS00351

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Brand #: BHA53492

How-to Video:

(10:13 min)