Replaces

Wheel Bearing & Hub Assembly Pair Front TRQ BHA53375 - 1ASHS00093

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Wheel Bearing & Hub Assembly Features & Benefits:
      Direct Fit Replacement
      Precision Engineered
      Highest Quality Materials
  • Bearing Type:   Ball Bearing
  • Quantity:   Pair
  • Front or Rear Location:   Front

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Includes Tone Ring Sensors for ABS applications
  • Will fit vehicles with or without ABS
  • Replaces dealer part numbers: F8AC2B663AB, F8AC-2B663AB, F8AC2C300AC, F8AC-2C300AC, F8AZ1104AA, F8AZ-1104AA, F8AZ1104BA, F8AZ-1104BA
  • Fit 5 Lug Wheels
  • Studs already installed
  • Built to strict quality control standards

Note: For 1997 models you can find the production date of your vehicle on either the outer edge of the driver's front door or on the latch pillar that the door closes on.

Item Condition: New

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

BHA53948 Axle / Spindle Nut Torque Specification

  1. step : Remove the wheel (1:04)
    • Pry off the center cap
    • Use the hub cap key to remove the hub cap.
    • Loosen the lug nuts.
    • Raise and secure the vehicle
    • Remove the lug nuts and the wheel.
    • For extra security, put the wheel under your car should your jack stands fail.
  2. step : disassemble the brakes (1:45)
    • Remove the 13 mm caliper bolts.
    • Use a screwdriver to pry between the caliper and caliper bracket to pry the caliper up and off.
    • Secure the caliper with wire ties up out of the way.
    • Using an 18 mm socket and a breaker bar or pipe for leverage, remove the caliper bracket bolts.
    • Remove the brake disc.
  3. step : Un-install the hub (3:56)
    • Remove the dust cover from the hub nut.
    • Using a breaker bar, maybe even a pipe for leverage in addition, remove the 35 mm hub nut.
    • Remove the hub.
  4. step : Install the new hub (4:48)
    • Clean up the area to insure a smooth fit.
    • Put the hub on, and replace the hub nut and torque it to 220 ft lbs.
  5. step : Reassemble the brakes (5:55)
    • Put the brake rotor/disc back on the hub.
    • Examine the brake rotor/disc for gouges or signs of excessive wear.
    • Replace the rotor if needed, remember to clean the rotor with warm soapy water or brake cleaner before installation, and prevent contact with oil and grease.
    • Check the condition of the brake pistons; make sure they slide in and out smoothly and freely.
    • Mount the caliper brackets and torque the 18 mm bolts to 90 ft lbs.
    • Check the condition of your brake pads and install new ones if needed.
    • Slide the brake pads into the brackets.
    • Compress the caliper and slide it onto the bracket and pads.
    • Bolt the caliper in, and torque the 13 mm bolts to 15-16 ft lbs.
  6. step : Replace the wheel (8:30)
    • Reinstall the small center cap and hub cap keeper.
    • Replace the lug nuts and lower the car, torque them in a star pattern to 100 ft lbs.
    • Put the hub cap back on and replace the safety nut and the final center cap back in place.
    • Place your hub cap key in back in your glove box for safekeeping.
    • Make sure you pump your brakes a few times before road testing to recompress the calipers.

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Wire Brush
  • Chisel
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Wire Ties
  • Anti-Seize Grease
  • Rust Penetrant

  • Ratchets & Related

  • Ratchet
  • Socket Extensions
  • A Piece of Pipe (for leverage)
  • 1/2 Inch Breaker Bar
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 18mm Socket
  • 35mm Socket
  • 13mm Socket
  • 21mm Socket

5.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
ITS GREAT PRODUCT AND EXCELLENT PRICE TOO !!!!!
May 31, 2013
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Can I use these on the Rear also?
Leeroy T May 3, 2017
No, if you have a Lincoln town car, mercury grand marquis or Ford crown Vic these will only work on the front. As those cars have a solid rear axle and have a completely different type of bearing setup.
James J May 3, 2017
The rears will be different parts.
Alex P May 3, 2017
No. The back is different from the front..
Jermaine R May 3, 2017
Year Make Model Description
1997Ford Crown Victoria Ford Crown Victoria Front Wheel Bearing & Hub Assembly Pair (Built After 4/97 Production Date) TRQ
1998-2002Ford Crown Victoria Ford Crown Victoria Front Wheel Bearing & Hub Assembly Pair TRQ
1997Lincoln Town Car Lincoln Town Car Front Wheel Bearing & Hub Assembly Pair (Built After 6/97 Production Date) TRQ
1998-2002Lincoln Town Car Lincoln Town Car Front Wheel Bearing & Hub Assembly Pair TRQ
1997Mercury Grand Marquis Mercury Grand Marquis Front Wheel Bearing & Hub Assembly Pair (Built After 4/97 Production Date) TRQ
1998-2002Mercury Grand Marquis Mercury Grand Marquis Front Wheel Bearing & Hub Assembly Pair TRQ
Part #: 1ASHS00093


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

TRQ
Brand #: BHA53375

How-to Video:

(09:45 min)