Replaces

Wheel Bearing & Hub Assembly Pair Front TRQ BHA53325 - 1ASHS00034

These replacement hub & bearing assemblies are just what you need to get your vehicle in good working order again.

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • 3 Bolt Flanges
  • Fit 5 Lug Wheels
  • Replaces dealer part numbers: YL5Z-1104-AA, 1F02-33-061, YL5Z1104AA, 1F0233061
  • New wheel studs installed
  • Includes ABS sensors
  • Direct replacements
  • Built to strict quality control standards
  • Fit models without Pulse Vacuum Hubs
  • Fit models with 4 Wheel ABS (Anti-Lock Brakes) only
  • Fit 4WD (Four Wheel Drive) Models only

Note: These hubs only fit 4wd vehicles that have 4 wheel ABS and non pulse vacuum hubs. To tell the difference, the non pulse hub assemblies will have a smooth, inner surface (as pointed out in picture) where the axle shafts come through.

Quality

  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both Bizrate.com and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
  • You don't want to be delayed by a defective part. 1A Auto wheel hubs & bearings are all tested prior to shipping.

Fit Guaranteed

  • These hub & bearing sets will install just as your originals do. You can use your existing hardware.
  • Save time and money with direct fit hub bearing assemblies. No trips to the auto parts store or extra time trying to match up and press bearings.
  • Hub installation is a degree more difficult than changing a tire on most vehicles.

Value

  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.
Precision Engineered

From the highest grade SAE 1055 / 65Mn high carbon steel to exact OEM design.

100% Factory tested to precise OEM tolerances.

Highest Quality Materials

High quality, multi-lip seal reduces the intrusion of dirt and water. Heavy duty grease resists high temperature, moisture, and reduces intense friction.

Direct Fit Replacement

Guaranteed to fit and function correctly for your specific application.

Part Details

  • Front or Rear Location: Front
  • Quantity: Pair

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

BHA53916 Axle / Spindle Nut Torque Specification

  1. step : Removing the Wheel (0:51)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the 32mm axle nut
    • Remove the wheel lock lug nut with a wheel lock key
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Hub (1:55)
    • Remove the two 15mm bolts holding the caliper bracket to the spindle
    • Secure the caliper bracket and assembly out of the way with a bungee cord
    • Remove the rotor
    • Disconnect the ABS sensor
    • Pry the ABS sensor connectors from the frame
    • Remove the 8mm bolt from the ABS harness
    • Remove the 32mm axle nut
    • Lightly tap the end of the axle with a hammer
    • Remove the three 15mm bolts on the backside of the spindle
    • Release the hub with a chisel and hammer and separate it from the spindle
  3. step : Installing the Hub (6:00)
    • Insert the hub and sensor into the spindle
    • Start the three 15mm bolts
    • Tighten the three 15mm bolts to the hub
    • Torque the 15mm bolt to 85 foot-pounds
    • Reinstall the 32mm axle nut by hand
    • Tighten the 8mm bolt to the ABS harness
    • Clip in the harness along the frame
    • Connect the ABS harness
    • Reinstall the rotor
    • Insert the caliper into place
    • Tighten the two 15mm bolts to the caliper
    • Torque the caliper bolts to 85 foot-pounds
  4. step : Reattaching the Wheel (8:11)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds of torque in a crossing or star pattern
    • Tighten the 32mm axle nut
    • Torque the axle nut to 162 foot-pounds
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Chisel
  • Hammer
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Bungee Cord

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 32mm Socket
  • 19mm Socket
  • 15mm Socket
  • 8mm Socket

  • Specialty Tools

  • Trim Tool Set

4.8 / 5.0
5 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
4
1
0
0
0
wheel bearing assembly installation
Parts were delivered quickly and they were the right parts. The video instructions were easy to understand and the list of tools needed really helped.
March 27, 2018
Purchased
4 months ago
perfect
perfect match and installation was simple and flawless.
March 18, 2018
Purchased
4 months ago
Ease of Installation
This was an easy install and the part matched right up. I ordered a pair of them but I was fortunate enough to only have to install one of them to halt the humming noise coming from the front end. Thank you for the installation video as I would have taken much longer to install the part without it. Get job everyone and keep it up!
July 10, 2017
Purchased
1 year ago
Ford repair
This is my second purchase and I am very impressed with 1aauto. The wheel bearings fit like a glove. Delivery was quick and the product was well packaged for protection. The price was better than most auto part suppliers. I will definitely be placing more orders with your company. Thank you.
May 7, 2017
Purchased
1 year ago
Parts
I recommend 1a auto to everyone I deal with I run a shop part time I tell my customers if you can wait a few days it's well worth it and the men I work with in the coal fields I'm always recommending 1a auto thank you for the good products at a afordable price thanks you Albert Butcher
March 25, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2000 Ford Ranger 4 Wheel Drive Front Wheel Bearing & Hub Assembly for Models with 4 Wheel ABS Brakes Pair without Pulse Vacuum Hubs TRQ
  • 2001-2002 Ford Ranger 4 Wheel Drive Front Wheel Bearing & Hub Assembly for Models with 4 Wheel ABS Brakes Pair TRQ
  • 2001-2003 Mazda B2300 Truck 4 Wheel Drive Front Wheel Bearing & Hub Assembly for Models with 4 Wheel ABS Brakes Pair TRQ
  • 1999-2000 Mazda B2500 Truck 4 Wheel Drive Front Wheel Bearing & Hub Assembly for Models with 4 Wheel ABS Brakes Pair without Pulse Vacuum Hubs TRQ
  • 2001-2003 Mazda B2500 Truck 4 Wheel Drive Front Wheel Bearing & Hub Assembly for Models with 4 Wheel ABS Brakes Pair TRQ
  • 1999-2000 Mazda B3000 Truck 4 Wheel Drive Front Wheel Bearing & Hub Assembly for Models with 4 Wheel ABS Brakes Pair without Pulse Vacuum Hubs TRQ
  • 2001-2003 Mazda B3000 Truck 4 Wheel Drive Front Wheel Bearing & Hub Assembly for Models with 4 Wheel ABS Brakes Pair TRQ
  • 1999-2000 Mazda B4000 Truck 4 Wheel Drive Front Wheel Bearing & Hub Assembly for Models with 4 Wheel ABS Brakes Pair without Pulse Vacuum Hubs TRQ
  • 2001-2003 Mazda B4000 Truck 4 Wheel Drive Front Wheel Bearing & Hub Assembly for Models with 4 Wheel ABS Brakes Pair TRQ

This part replaces:

  • TRQ BHA53325
Part #: 1ASHS00034

TRQ
Brand #: BHA53325

How-to Video:

(09:11 min)