Replaces

Wheel Bearing & Hub Assembly Pair Front TRQ BHA53307 - 1ASHS00013

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Wheel Bearing & Hub Assembly Features & Benefits:
      Direct Fit Replacement
      Precision Engineered
      Highest Quality Materials
  • Bearing Type:   Ball Bearing
  • Quantity:   Pair
  • Front or Rear Location:   Front

Specifications:

  • Comes as a Pair for the Front
  • Direct replacements
  • Replaces dealer part numbers: 7470511, (Bearing #7470510)
  • Includes ABS sensors
  • Built to strict quality control standards

 

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

BHA53904 Axle / Spindle Nut Torque Specification

  1. step : Removing the Wheel (0:59)
    • Remove the center cap.
    • Loosen the lug nuts.
    • Raise the vehicle and remove the lug nuts.
    • Pull the wheel off.
  2. step : Removing the Hub (1:15)
    • Use a ratchet and a piece of pipe for leverage to remove the CV 34mm nut.
    • Use the 3/8â€� Allen tool to remove the two bolts on the back of the caliper.
    • Pry the caliper up to separate it from the rotor.
    • Disconnect the connector behind the hub.
    • Hammer the axel in to make sure it’s free from the hub.
    • Rotate the hub to locate the T55 bolts. Remove two and loosen one.
    • Hit the back side of the hub until it breaks free.
    • Remove the bolt and pull the hub free.
  3. step : Preparing the Area (4:27)
    • Use a wire brush to clean where the hub fits into.
    • Scrape rust off with a flat blade screwdriver or a chisel so the hub will sit flush up against it.
  4. step : Reassembling the Hub (4:54)
    • Push the hub into place and replace the backing plate.
    • Reinstall the T55 bolts and torque them to 55ft/lbs.
    • Reconnect the connector and clip it to the backing plate.
    • Reinstall the 34mm nut.
    • Put the rotor back into place.
    • Put the pads into place.
    • Slide the caliper back on to the rotor.
    • Replace and tighten the Allen bolts.
  5. step : Replacing the Wheel (6:58)
    • Replace the wheel.
    • Replace the lug nuts.
    • Lower the vehicle and torque the lug nuts to 100ft/lbs.
    • Tighten the CV nut to 107ft/lbs.
    • Replace the center cap.
    • Pump the brakes until they get firm.

Tools needed for replacement:

    Allen Wrenches

  • 3/8 Inch Allen Wrench

  • General Tools

  • Hammer
  • Wire Brush
  • Jack Stands

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 19mm Socket
  • 34mm Socket

  • Torx Drivers & Sockets

  • T55 Torx Socket

4.67/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
1
0
0
0
The parts that I ordered were a perfect fit, I really appreciate the quality of service I received when talking to the service rep by phone, I tell all my friends about A1 great prices and their outstanding quality in taking care of their customers need. I will definitely become a regular customer, thanks A1.
January 2, 2018
Wheel Bearing Hubs for 1994 Olds 88
I enjoy doing business with 1a auto. I have bought from them numerous times and have always had prompt and helpful service. I am not a mechanic. I am a 75 year old DIY guy. It took me about 1 1/2 hours to replace my wheel bearing hubs working on my driveway with a jack and jack stand.
April 17, 2018
Wrong part but was my own fault . Otherwise it was a pleasant experience. Quick delivery
August 28, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Hello, the insturctions and video both say a T55 socket is needed to remove the three bolts holding the hub on, it is unclear in the video if this is a T55 bit attached to a socket or if this is a T55 headed bolt that would actually require a E12 socket for removal? Can you please tell me which it is that is used for removal so I can confirm I have the right tools for the job? Thanks.
Mason M October 24, 2017
It appears that the T55 is a bit attached to a socket used for removal.
Alex P October 25, 2017
Yes a T55 bit attached to a socket, I picked mine up from a local auto parts place.
Chris K October 25, 2017
I cant help you the car went to the garage and they put them on. I would check with youre local shop
John F October 25, 2017
They are t55. I believe if I remember correctly they just have a 1/2" drive t55.
Benjamin L October 25, 2017
Use t55 socket
David J October 26, 2017
Use a T55 Torx bit, which will fit inside the bolt head.
Bob N October 26, 2017
It is a T-55 bit I bought mine as a socket on one end and a bit on the other. By the way it is a very easy job.
Randy D October 27, 2017
Year Make Model Description
1994-1996Buick Century Buick Century Front Wheel Bearing & Hub Assembly Pair TRQ
1992Buick LeSabre Buick LeSabre with ABS Brakes Front Wheel Bearing & Hub Assembly Pair TRQ
1993-1999Buick LeSabre Buick LeSabre Front Wheel Bearing & Hub Assembly Pair TRQ
1992-1996Buick Park Avenue Buick Park Avenue Front Wheel Bearing & Hub Assembly Pair TRQ
1992-1996Buick Riviera Buick Riviera Front Wheel Bearing & Hub Assembly Pair TRQ
1993Cadillac Allante Cadillac Allante Front Wheel Bearing & Hub Assembly Pair TRQ
1992-1993Cadillac Deville Cadillac Deville with ABS Brakes Front Wheel Bearing & Hub Assembly Pair TRQ
1994-1996Cadillac Deville Cadillac Deville Front Wheel Bearing & Hub Assembly Pair TRQ
1992-1996Cadillac Eldorado Cadillac Eldorado Front Wheel Bearing & Hub Assembly Pair TRQ
1992-1993Cadillac Fleetwood Cadillac Fleetwood Front Wheel Drive with ABS Brakes Front Wheel Bearing & Hub Assembly Pair TRQ
1992-1994Chevy Lumina APV Chevy Lumina APV 16.25mm Lug Hole Front Wheel Bearing & Hub Assembly Pair TRQ
1995-1996Chevy Lumina APV Chevy Lumina APV Front Wheel Bearing & Hub Assembly Pair TRQ
1992Oldsmobile 88 Olds 88 with ABS Brakes Front Wheel Bearing & Hub Assembly Pair TRQ
1993-1999Oldsmobile 88 Olds 88 Front Wheel Bearing & Hub Assembly Pair TRQ
1992Oldsmobile 98 Olds 98 with ABS Brakes Front Wheel Bearing & Hub Assembly Pair TRQ
1992Oldsmobile 98-Regency Olds 98-Regency with ABS Brakes Front Wheel Bearing & Hub Assembly Pair TRQ
1995-1996Oldsmobile Aurora Olds Aurora Front Wheel Bearing & Hub Assembly Pair TRQ
1994-1996Oldsmobile Cutlass Ciera Olds Cutlass Ciera Wheel Bearing & Hub Assembly Pair Front TRQ
1992Oldsmobile Delta 88 Olds Delta 88 with ABS Brakes Front Wheel Bearing & Hub Assembly Pair TRQ
1993-1999Oldsmobile Delta 88 Olds Delta 88 Front Wheel Bearing & Hub Assembly Pair TRQ
1992Oldsmobile Delta 88-Royale Olds Delta 88-Royale with ABS Brakes Front Wheel Bearing & Hub Assembly Pair TRQ
1993-1999Oldsmobile Delta 88-Royale Olds Delta 88-Royale Front Wheel Bearing & Hub Assembly Pair TRQ
1992Pontiac Bonneville Pontiac Bonneville with ABS Brakes Front Wheel Bearing & Hub Assembly Pair TRQ
1993-1999Pontiac Bonneville Pontiac Bonneville Front Wheel Bearing & Hub Assembly Pair TRQ
Part #: 1ASHS00013


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

TRQ
Brand #: BHA53307

How-to Video:

(07:55 min)