Replaces

Wheel Bearing & Hub Assembly Front TRQ BHA54006 - 1ASHF00200

This replacement hub & bearing assembly is just what you need to get your vehicle in good working order again.

Specifications:

  • Fits either LH (Driver Side) or RH (Passenger Side) FRONT
  • 4 Bolt Rectangular Flange
  • Fits 6 Lug Wheel
  • Replaces dealer part number: 7L3Z-1104-A, 7L3Z1104A
  • Has ABS (Anti Lock Brakes) sensor already installed
  • Direct replacement
  • Built to strict quality control standards
  • Fits 4WD (Four Wheel Drive) Models only

Note: For 2005 models you can find the production date of your vehicle on either the outer edge of the driver's front door or on the latch piller that the door closes on.

Quality

  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both Bizrate.com and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
  • You don't want to be delayed by a defective part. 1A Auto wheel hub & bearings are all tested prior to shipping.

Fit Guaranteed

  • This hub & bearing will install just as your original does. You can use your existing hardware.
  • Save time and money with this direct fit hub bearing assembly. No trips to the auto parts store or extra time trying to match up and press bearings.
  • Hub installation is a degree more difficult than changing a tire on most vehicles.

Value

  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.
Precision Engineered

Precision Engineered using the highest grade SAE 1055 / 65Mn high carbon steel to exact OEM design.

100% Factory tested to precise OEM tolerances.

Highest Quality Materials

High quality, multi-lip seal reduces the intrusion of dirt and water, keeping grease clean for a longer bearing life.

Premium, heavy duty grease resists high temperature, moisture, and reduces intense friction pressure to help extend the life of the bearing.

Direct Fit Replacement

Direct fit replacement part is guaranteed to fit and function correctly for your specific application

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

BHA54006 Axle / Spindle Nut Torque Specification
  1. step : Removing the Wheel (0:42)
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the 21mm lug nuts with the vehicle on the ground
    • Remove the hub cap with pliers
    • Loosen the 13mm nut
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:32)
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Remove the 13mm bolts from the brake caliper
    • Pull the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
  3. step : Removing the Brake Rotor (2:32)
    • Remove the 18mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Thread a nut onto the rotor
    • Hit the rotor with a hammer
    • Pull the rotor off
  4. step : Removing the Hub (2:58)
    • Disconnect the ABS harness sensor
    • Remove the ABS from the harness on the bracket
    • Remove the four 18mm bolts from the hub
    • Remove the 13mm hub nut, making sure you can push the nut in and out
    • Twist in an 18mm bolt to the hub
    • Remove the hub
  5. step : Installing the Hub (4:42)
    • Grease the set of bearings inside the new hub with bearing grease
    • Apply a light coat of bearing grease to the engaging wheel for the 4WD
    • Insert the hub into place
    • Tighten the 18mm bolts to the hub
    • Tighten the 18mm bolts to 95 foot-pounds of torque
    • Replace and tighten the 13mm hub nut
    • Tighten the 13mm bolt to 20 foot-pounds of torque
    • Push the ABS wire into its respective brackets
    • Replace the hub cap
  6. step : Installing the New Brake Rotor (6:41)
    • Slide the rotor on
    • Thread on one lug nut to hold the rotor in place
    • Adjust the emergency brake, if necessary
    • Put the bracket back into place
    • Start the 18mm bolts by hand
    • Tighten the bolts to 95 foot-pounds of torque
  7. step : Installing the New Brake Pads (7:24)
    • Put the caliper on
    • Thread the 13mm bolts by hand
    • Tighten bolts to 25 foot-pounds
    • Remove the lug nut from the rotor
  8. step : Reattaching the Wheel (8:55)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 110 foot-pounds in a crossing or star pattern
    • Reattach the center cap
    • Connect the ABS sensor
  9. step : Testing the Brakes (9:42)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Torque Wrench
  • A Piece of Pipe (for leverage)
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 21mm Socket
  • 18mm Socket

4.8 / 5.0
5 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
4
1
0
0
0
Great part great support great price.
Quality part, less than half price than at local parts stores.

Shipping was fast. Video and tool list really helps the do it yourself type like me alot.

Will be using 1A auto again.
March 9, 2017
Purchased
1 year ago
5 Star Company
The only problem that I have with 1aauto.com is that I didn't find out about them sooner!

Fast Shipping
Excellent Customer Service
Quality Products at Great Prices
November 15, 2016
Purchased
1 year ago
I am very happy with the wheel bearing.
I am very happy with service and shipping also the video on how to do replacement.s
September 12, 2017
Purchased
7 months ago
Nice
Installed this on my 06 f150 xlt 4x4. Fit was a direct replacement of original hub. Quality appears to be top notch. I've put about 500 miles on so far and all is well. I'm a shade tree type of mechanic, and from start to finish with no hurry total time was 2 hours. I saved 100 bucks from the auto parts place by me. I recommend, and will buy here again in the future.
September 19, 2017
Purchased
7 months ago
So far so good
Part was as was displayed. Part fit perfect. Timely delivery and easy use of system. Time will tell how it holds up. Only has 200 miles on it.
August 18, 2017
Purchased
8 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 3 questions Browse 3 questions and 6 answers
Do the bearings come already greased or will I have to pack them myself?
R T on Oct 30, 2015
BEST ANSWER: Hello and thank you for your inquiry. Yes, as Brian and Tonya have stated these will come ready to install. They are sealed units and will not need any greasing. Thank you and have a great day!
would this fit on a 2005 f-150 king ranch 4x4?
dont have one on Aug 6, 2015
BEST ANSWER: It should fit a 05 f150 king ranch, it should be the same as my 06 f150 Xlt
Who is the manufacturer of the 1ASHF00200 wheel hub assembly???
George M on Nov 29, 2015
BEST ANSWER: These are an overseas manufacturer. We have no specific designated location for our acquisition.

Vehicle Fit

  • 2005 Ford F150 Truck 4 Wheel Drive Front for Models with 6 Lug Wheels Wheel Bearing & Hub Assembly (Built After 11/28/04 Production Date) TRQ
  • 2006-2008 Ford F150 Truck 4 Wheel Drive Front for Models with 6 Lug Wheels Wheel Bearing & Hub Assembly TRQ
  • 2006-2008 Lincoln Mark LT 4 Wheel Drive Front Wheel Bearing & Hub Assembly TRQ

This part replaces:

  • Hollander 538-01672
  • OE # 7L3Z 1104 A
  • TRQ BHA54006
Part #: 1ASHF00200

Ships Same Day for orders placed by 4 P.M. ET

TRQ
Brand #: BHA54006

How-to Video:

(10:13 min)