Wheel Bearing & Hub Assembly Front TRQ BHA53905 - 1ASHF00022

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Wheel Bearing & Hub Assembly Features & Benefits:
      Direct Fit Replacement
      Precision Engineered
      Highest Quality Materials
  • Bearing Type:   Ball Bearing
  • Front or Rear Location:   Front

This replacement wheel bearing & hub assembly is just what you need to get your vehicle in good working order again.


  • Fits either LH (Driver Side) or RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 4593450AA
  • 3 Bolt Flange
  • Fits 5 Lug Wheels
  • Direct replacement
  • Built to strict quality control standards
This wheel bearing & hub assembly is a great replacement and has good cost savings over a unit from the dealer.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm -

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

BHA53905 Axle / Spindle Nut Torque Specification

  1. step : Remove the wheel (1:10)
    • Loosen the lug nuts
    • Raise and secure the vehicle
    • Remove the lug nuts and the wheel.
  2. step : Remove the brakes (1:35)
    • Turn the wheel to better access the caliper
    • Use a flat blade screwdriver to compress the caliper piston
    • Remove the two 10 mm bolts to remove the caliper.
    • Fasten the caliper up with wire ties out of the way
    • Remove the rotor, hammering it off if its rusted onto the hub.
  3. step : Remove the hub (3:10)
    • Remove the hub nut with a 34 mm socket and impact wrench.
    • If you don’t have an impact wrench, put the wheel and lug nuts back on and lower the car and use a breaker bar.
    • Unbolt the three 18 mm hub bolts.
    • Take caution not to damage the CV boot.
    • Break the hub loose with a hammer and remove it.
  4. step : Install the new hub (5:55)
    • Place the hub onto the steering knuckle and work the axle into place.
    • Bolt the three 18 mm bolts into place.
    • Torque them to 90 ft lbs, rotating so they get torqued evenly.
    • Replace the hub nut, but do not tighten all the way.
  5. step : Reassemble the brakes (8:45)
    • Put the rotor on and put a lug nut on just to keep it from running away on you while you put the caliper back on
    • Put the pads into the caliper and compress the piston with a c-clamp
    • Bolt the 10 mm caliper bolts back in
    • Put the wheel back on and hand tighten the lug nuts
    • Torque the hub nut to 105 ft lbs
    • Torque the lug nuts to 90-100 ft lbs using a star pattern.
    • Pump the brakes a few times to recompress the caliper pistons and do a few 5-10 mph stops in the driveway before road testing.

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Large Hammer

  • Ratchets & Related

  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 10mm Socket
  • 18mm Socket
  • 19mm Socket
  • 34mm Socket

  • Wrenches - Metric

  • 10mm Wrench
  • 18mm Wrench
  • 19mm Wrench

4.60/ 5.0
5 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Hub assembly front
After reviewing your how to video I had no problem replacing the hub assembly. Its a perfect fit. I hope because it is made in China it will last the rest of the life of the car.
January 29, 2018
Good stuff, fit perfect!!
Old hub fell apart, so at first I thought new part was the wrong one because it wouldnt fit. Then I realized part of the old hub was still in the spindle . After I got rest of old hub out it fit like a charm. Thnx to the video had every tool I needed and knew where all the bolts where before I even started.
August 2, 2018
Wheel Bearing & Hub Assembly Front
Very easy site to navigate , found a great selection of options, all priced to sell, received my parts in 2 days, never paid any extra for shipping. Will buy from 1A again going forward, The part ordered was a exact fit.
October 3, 2018
Replacing all parts for my car and was trying not to spend to much money and wasted time on parts not fitting right.and wait for big sales times it worked out for me
December 17, 2018
Easy fix
I replaced a wheel bearing on my 99 Chrysler lhs. The part I ordered from A1 was spot on. Great quality and workmanship on the bearing. Good instructions with it . Id recommend A1 to anyone. 4 stars from me!
January 4, 2019
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1999-2004Chrysler 300M Chrysler 300M Front Wheel Bearing & Hub Assembly TRQ
1993-2004Chrysler Concorde Chrysler Concorde Front Wheel Bearing & Hub Assembly TRQ
1994-2001Chrysler LHS Chrysler LHS Front Wheel Bearing & Hub Assembly TRQ
1994-1996Chrysler New Yorker Chrysler New Yorker Front Wheel Bearing & Hub Assembly TRQ
1993-2004Dodge Intrepid Dodge Intrepid Front Wheel Bearing & Hub Assembly TRQ
1993-1997Eagle Vision Eagle Vision Front Wheel Bearing & Hub Assembly TRQ
Part #: 1ASHF00022

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Brand #: BHA53905

How-to Video:

(13:19 min)