Replaces

Wheel Bearing & Hub Assembly Front TRQ BHA53891 - 1ASHF00005

Specifications:

  • Fits either LH (Driver Side) or RH (Passenger Side) FRONT
  • Has ABS sensor
  • 3 Bolt Flange
  • Fits 6 Lug Wheels
  • Wheel studs already installed
  • Direct replacement
  • Built to strict quality control standards
  • Fits 4WD (4 Wheel Drive) or AWD (All Wheel Drive) Models only

Quality

  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both Bizrate.com and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
  • You don't want to be delayed by a defective part. 1A Auto wheel hub & bearings are all tested prior to shipping.

Fit Guaranteed

  • This hub & bearing will install just as your original does. You can use your existing hardware.
  • Save time and money with this direct fit hub bearing assembly. No trips to the auto parts store or extra time trying to match up and press bearings.
  • Hub installation is a degree more difficult than changing a tire on most vehicles.

Value

  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

BHA53891 Axle / Spindle Nut Torque Specification
  1. step : Removing the Wheel (0:52)
    • Loosen the lug nut covers with a 22mm socket
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Caliper Bracket (1:17)
    • Remove the T55 Torx bolts from the caliper
    • Use either a C-clamp to squeeze the caliper to push the caliper piston in
    • Remove the caliper
    • Pry the brake pads off with a flat blade screwdriver
    • Use a piece of pipe and ratchet to remove two 18mm bolts from the caliper bracket
    • Slide the rotor off
  3. For the third step, if you do not have air tools you can either loosen the center hub nut before you take your brakes apart by having somebody hold the brakes, or you can use a large bar, put it between the lug studs to hold it, and break the bar.

  4. step : Removing the Hub (2:58)
    • Disconnect the ABS harness from the frame and steering spindle by removing the clips
    • Pry off the center hub cap using a flat blade screw driver and hammer
    • Remove the center hub nut with an impact wrench and air blow gun
    • Remove the three 15mm hub bolts with two 15mm wrenches
    • Twist the hub nut a quarter of the way
    • And hammer from the back of the hub
    • Remove the hub nut and pull the hub out
  5. step : Installing the New Hub (5:06)
    • Place the backing plate onto the hub
    • Push the hub back into place
    • Insert and tighten the 15mm hub bolts
    • Torque the 15mm hub bolts to 75 ft/lbs
    • Remove the clip and feed the ABS harness back into place
    • Replace the clips and brackets to the ABS harness
    • Replace center hub nut and washer
    • Tighten the center hub nut
  6. step : Replacing the Caliper Bracket (6:46)
    • Place the rotor on the hub
    • Twist a lug nut to hold the rotor in place
    • Put the caliper on
    • Replace and tighten the 18mm bolts
    • Torque the 18mm bolts to 75 ft/lbs
    • Install the new brake pads into the bracket, tapping lightly with a hammer
    • Grease the caliper bolts
    • Place the caliper onto the bracket
    • Replace and tighten the T55 Torx bolts
    • Torque the bolts to 30 ft/lbs
  7. step : Reinstalling the Wheel (8:46)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the 22mm bolts
    • Tighten the lug nuts to 100 ft/lbs in a crossing or star pattern
    • Torque the center hub nut to a 125 ft/lbs
    • Reattach the center cap
  8. step : Testing the Brakes (9:33)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    Allen Wrenches

  • 5mm Allen Wrench

  • General Tools

  • Hammer
  • Jack Stands
  • Large C-Clamp

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 18mm Socket
  • 22mm Socket
  • 35mm Socket

  • Torx Drivers & Sockets

  • T55 Torx Socket

  • Wrenches - Metric

  • 15mm Wrench

5.0 / 5.0
50 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
48
2
0
0
0
Wheel bearing assembly
Part fit perfect and works very well did not know that it was made in china did not say on your website would not have bout it if I knew that
March 3, 2017
Purchased
1 year ago
As advertisted
Appears to be of better quality that one that cost twice as much at autozone!
July 19, 2017
Purchased
7 months ago
Good experience
Easy ordering, fast shipping. Part fit perfectly and install instructions were spot on.
November 6, 2017
Purchased
3 months ago
HUB ASSEMBLY FOR 2003 SILVERADO
I HAVE PURCHSED FROM YOU PREVIOUSLY AND APPRECIATE THE FREE SHIPPING, THE QUALITY, QUICK RESPONE OF DELIVERY AND THE VIDEO OF HOW TO. I WILL BE BACK WHEN OTHER PARTS ARE NEEDED.

THANKS
November 29, 2017
Purchased
3 months ago
DIYer
Received the part at a great price. Fit just fine so far. Thank you.
February 27, 2017
Purchased
1 year ago
works
installed as easy as these do - works great. if only that nut was a little smaller.
July 20, 2017
Purchased
7 months ago
Wheel Hub for 2004 Avalanche
Hub was an exact fit & arrived earlier than anticipated. Would definitely buy again. Huge savings over OEM & local partsw stores.
November 14, 2017
Purchased
3 months ago
Nice parts, nice service
Love the part, right fit rolling again because of 1aauto
January 24, 2017
Purchased
1 year ago
Quick arrival
Everything I need in a fast and prompt delivery. Got here before the time thy said it would, thanks guys and gals!
October 3, 2017
Purchased
5 months ago
Perfect
The hub was exactly the same as the original. It fit perfectly and the installation video was great. I was able to install it in about an hour (had some sticky bolts). Great price.
February 3, 2018
Purchased
3 weeks ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 4 questions Browse 4 questions and 8 answers
Who manufacturers this part?
SONNY L on May 18, 2016
BEST ANSWER: We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle. If you have any further questions, please don't hesitate to ask.
What is the torque for the axle hub nut?
travis b on Jan 13, 2018
BEST ANSWER: Thanks for your question! The torque spec is usually different for different vehicles. Please contact us and we can pull up your order for your vehicle and tell you over the phone. Thanks!
Is the abs sensor on this hub active or passive?
Dereck N on Oct 26, 2017
BEST ANSWER: I would say active but not exactly sure what you mean
What size are the bolts holding the wheel bearing hub Assembly on? On a 2001 Chevrolet Tahoe
Jordan G on Dec 26, 2016
BEST ANSWER: not to sure but on average, 15MM or 17MM for the 3 bolt heads on the back side

How-to Video:

(10:03 min)

Tools List:

    Allen Wrenches

  • 5mm Allen Wrench

  • General Tools

  • Hammer
  • Jack Stands
  • Large C-Clamp

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 18mm Socket
  • 22mm Socket
  • 35mm Socket

  • Torx Drivers & Sockets

  • T55 Torx Socket

  • Wrenches - Metric

  • 15mm Wrench



This part replaces:

  • OE # 15102294
  • OE # 15112382
  • OE # 15134584
  • Hollander 538-01481
  • TRQ BHA53891

Vehicle Fit

  • 2002-2006 Cadillac Escalade All Wheel Drive Front Wheel Bearing & Hub Assembly TRQ
  • 2003-2006 Cadillac Escalade ESV All Wheel Drive Front Wheel Bearing & Hub Assembly TRQ
  • 2002-2006 Cadillac Escalade EXT All Wheel Drive Front Wheel Bearing & Hub Assembly TRQ
  • 2002-2006 Chevy Avalanche 1500 4 Wheel Drive Front Wheel Bearing & Hub Assembly TRQ
  • 2003-2013 Chevy Express 1500 Van 4 Wheel Drive Front Wheel Bearing & Hub Assembly TRQ
  • 2003-2005 Chevy Express 2500 Van 4 Wheel Drive Front Wheel Bearing & Hub Assembly TRQ
  • 1999-2000 Chevy Silverado 1500 4 Wheel Drive Front Wheel Bearing & Hub Assembly TRQ
  • 2001-2003 Chevy Silverado 1500 4 Wheel Drive Front Wheel Bearing & Hub Assembly TRQ
  • 2004-2006 Chevy Silverado 1500 4 Wheel Drive Front Wheel Bearing & Hub Assembly for Models with 6 Lug Wheels TRQ
  • 2007 Chevy Silverado 1500 Classic 4 Wheel Drive Front Wheel Bearing & Hub Assembly 6 Lug Wheels for Models TRQ
  • 2000-2006 Chevy Suburban 1500 4 Wheel Drive Front Wheel Bearing & Hub Assembly TRQ
  • 2000 Chevy Tahoe 4 Wheel Drive Front Wheel Bearing & Hub Assembly excluding Z71 Models TRQ
  • 2001-2006 Chevy Tahoe 4 Wheel Drive Front Wheel Bearing & Hub Assembly TRQ
  • 2003-2013 GMC Savana 1500 Van 4 Wheel Drive Front Wheel Bearing & Hub Assembly TRQ
  • 2003-2005 GMC Savana 2500 Van 4 Wheel Drive Front Wheel Bearing & Hub Assembly TRQ
  • 1999-2000 GMC Sierra 1500 4 Wheel Drive Front Wheel Bearing & Hub Assembly TRQ
  • 2001-2003 GMC Sierra 1500 4 Wheel Drive Front Wheel Bearing & Hub Assembly TRQ
  • 2004-2006 GMC Sierra 1500 4 Wheel Drive Front Wheel Bearing & Hub Assembly for Models with 6 Lug Wheels TRQ
  • 2007 GMC Sierra 1500 Classic 4 Wheel Drive Front Wheel Bearing & Hub Assembly for Models with 6 Lug Wheels TRQ
  • 2000 GMC Yukon 4 Wheel Drive Front Wheel Bearing & Hub Assembly excluding Denali Models TRQ
  • 2001-2006 GMC Yukon 4 Wheel Drive Front Wheel Bearing & Hub Assembly TRQ
  • 2000-2006 GMC Yukon XL 1500 4 Wheel Drive Front Wheel Bearing & Hub Assembly TRQ
Part #: 1ASHF00005

Ships Same Day for orders placed by 4 P.M. ET

TRQ
Brand #: BHA53891

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More