Replaces

Wheel Bearing & Hub Assembly Timken SP580310 - TKSHF00080

TIMKEN WHEEL BEARING & HUB ASSEMBLY: SP580310

This replacement hub & bearing assembly is just what you need to get your vehicle in good working order again.

Specifications:

  • Brand New Timken Wheel Bearing & Hub Assembly
  • Fits LH (Driver Side) or RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 15225770, 15064670, 15946732
  • ABS sensor included
  • New wheel studs installed
  • Direct replacement
  • Built to strict quality control standards
  • Fits models with 8 lug wheels
  • Fits both 2WD & 4WD models

Note: These parts are authentic Timken brand products that are supplied and packaged by Timken.   In some cases, Timken will source parts from other high quality suppliers such as SKF and Koyo. These parts are subjected to the very same testing and quality standards as all Timken products.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:52)
    • Loosen the lug nut covers with a 22mm socket
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Caliper Bracket (1:17)
    • Remove the T55 Torx bolts from the caliper
    • Use either a C-clamp to squeeze the caliper to push the caliper piston in
    • Remove the caliper
    • Pry the brake pads off with a flat blade screwdriver
    • Use a piece of pipe and ratchet to remove two 18mm bolts from the caliper bracket
    • Slide the rotor off
  3. For the third step, if you do not have air tools you can either loosen the center hub nut before you take your brakes apart by having somebody hold the brakes, or you can use a large bar, put it between the lug studs to hold it, and break the bar.

  4. step : Removing the Hub (2:58)
    • Disconnect the ABS harness from the frame and steering spindle by removing the clips
    • Pry off the center hub cap using a flat blade screw driver and hammer
    • Remove the center hub nut with an impact wrench and air blow gun
    • Remove the three 15mm hub bolts with two 15mm wrenches
    • Twist the hub nut a quarter of the way
    • And hammer from the back of the hub
    • Remove the hub nut and pull the hub out
  5. step : Installing the New Hub (5:06)
    • Place the backing plate onto the hub
    • Push the hub back into place
    • Insert and tighten the 15mm hub bolts
    • Torque the 15mm hub bolts to 75 ft/lbs
    • Remove the clip and feed the ABS harness back into place
    • Replace the clips and brackets to the ABS harness
    • Replace center hub nut and washer
    • Tighten the center hub nut
  6. step : Replacing the Caliper Bracket (6:46)
    • Place the rotor on the hub
    • Twist a lug nut to hold the rotor in place
    • Put the caliper on
    • Replace and tighten the 18mm bolts
    • Torque the 18mm bolts to 75 ft/lbs
    • Install the new brake pads into the bracket, tapping lightly with a hammer
    • Grease the caliper bolts
    • Place the caliper onto the bracket
    • Replace and tighten the T55 Torx bolts
    • Torque the bolts to 30 ft/lbs
  7. step : Reinstalling the Wheel (8:46)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the 22mm bolts
    • Tighten the lug nuts to 100 ft/lbs in a crossing or star pattern
    • Torque the center hub nut to a 125 ft/lbs
    • Reattach the center cap
  8. step : Testing the Brakes (9:33)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    Allen Wrenches

  • 5mm Allen Wrench

  • General Tools

  • Hammer
  • Jack Stands
  • Large C-Clamp

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 18mm Socket
  • 22mm Socket
  • 35mm Socket

  • Torx Drivers & Sockets

  • T55 Torx Socket

  • Wrenches - Metric

  • 15mm Wrench

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
Hub Assembly
Great product and really easy to install. I would recommend this product and using 1A..
March 12, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2002-2006Chevy Avalanche 2500 Chevy Avalanche 2500 Front Wheel Bearing & Hub Assembly Timken SP580310
2004Chevy Silverado 1500 Chevy Silverado 1500 8 Lug Wheels Front Wheel Bearing & Hub Assembly Timken SP580310
2001-2003Chevy Silverado 1500 HD Chevy Silverado 1500 HD Front Wheel Bearing & Hub Assembly Timken SP580310
2005-2006Chevy Silverado 1500 HD Chevy Silverado 1500 HD Front Wheel Bearing & Hub Assembly Timken SP580310
2007Chevy Silverado 1500 HD Classic Chevy Silverado 1500 HD Classic Front Wheel Bearing & Hub Assembly Timken SP580310
1999-2004Chevy Silverado 2500 Chevy Silverado 2500 Front Wheel Bearing & Hub Assembly Timken SP580310
2001-2006Chevy Silverado 2500 HD Chevy Silverado 2500 HD Front Wheel Bearing & Hub Assembly Timken SP580310
2007Chevy Silverado 2500 HD Classic Chevy Silverado 2500 HD Classic Front Wheel Bearing & Hub Assembly Timken SP580310
2004-2006Chevy Silverado 3500 Chevy Silverado 3500 RPO Code JH6 (Hyd Power 4 Wheel Disc Brakes, 9900lb) with Single Rear Wheels (SRW) Front Wheel Bearing & Hub Assembly Timken SP580310
2007Chevy Silverado 3500 Classic Chevy Silverado 3500 Classic RPO Code JH6 (Hyd Power 4 Wheel Disc Brakes, 9900lb) with Single Rear Wheels (SRW) Front Wheel Bearing & Hub Assembly Timken SP580310
2000-2006Chevy Suburban 2500 Chevy Suburban 2500 Front Wheel Bearing & Hub Assembly Timken SP580310
2004GMC Sierra 1500 GMC Sierra 1500 8 Lug Wheels Front Wheel Bearing & Hub Assembly Timken SP580310
2001-2003GMC Sierra 1500 HD GMC Sierra 1500 HD Front Wheel Bearing & Hub Assembly Timken SP580310
2005-2006GMC Sierra 1500 HD GMC Sierra 1500 HD Front Wheel Bearing & Hub Assembly Timken SP580310
2007GMC Sierra 1500 HD Classic GMC Sierra 1500 HD Classic Front Wheel Bearing & Hub Assembly Timken SP580310
1999-2004GMC Sierra 2500 GMC Sierra 2500 Front Wheel Bearing & Hub Assembly Timken SP580310
2001-2006GMC Sierra 2500 HD GMC Sierra 2500 HD Front Wheel Bearing & Hub Assembly Timken SP580310
2007GMC Sierra 2500 HD Classic GMC Sierra 2500 HD Classic Front Wheel Bearing & Hub Assembly Timken SP580310
2004-2006GMC Sierra 3500 GMC Sierra 3500 RPO Code JH6 (Hyd Power 4 Wheel Disc Brakes, 9900lb) with Single Rear Wheels (SRW) Front Wheel Bearing & Hub Assembly Timken SP580310
2007GMC Sierra 3500 Classic GMC Sierra 3500 Classic RPO Code JH6 (Hyd Power 4 Wheel Disc Brakes, 9900lb) with Single Rear Wheels (SRW) Front Wheel Bearing & Hub Assembly Timken SP580310
2000-2006GMC Yukon XL 2500 GMC Yukon XL 2500 Front Wheel Bearing & Hub Assembly Timken SP580310
2003-2007Hummer H2 Hummer H2 Front Wheel Bearing & Hub Assembly Timken SP580310

This part replaces:

  • Timken SP580310
  • Hollander 538-01482, 538-01764
  • OE # 15225770
Part #: TKSHF00080


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Timken
Brand #: SP580310

How-to Video:

(10:03 min)