Replaces

Wheel Bearing & Hub Assembly Front Timken 515027 - TKSHF00013

TIMKEN HUB ASSEMBLY: 515027

Specifications:

  • Brand New Timken Hub Assembly
  • Fits RH or LH FRONT
  • Includes ABS sensor
  • Correct for trucks that have 4wd, 4 wheel ABS, and Pulse Vacuum Hubs
  • Fits 5 Lug Wheel
  • Studs already installed

Note: For 2000 year models this hub only fits 4wd vehicles that have 4 wheel ABS and pulse vacuum hubs. To tell the difference, the pulse hub assembly will have a splined or grooved inner surface (as pointed out in picture) where the axle shaft comes through.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:00)
    • Loosen the lug nuts with the vehicle on the ground
    • Remove the cotter pin from the axle nut if it has one
    • Loosen the axle nut
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (3:22)
    • Remove the bolts from the caliper bracket
    • Pull the caliper off
    • Put the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
  3. step : Removing the Brake Rotor (4:15)
    • Remove the two bolts from the caliper bracket
    • Pull off the brake caliper bracket
    • Remove a screw from the rotor if it has one
    • Strike the drum surface of the rotor with a hammer to loosen the rotor
    • Pull the rotor off
    • Clean the hub surface with a wire brush
  4. step : Removing the Hub Assembly (5:18)
    • Remove the axle bolt
    • Place a punch in the axle hole and hammer it to release the hub from the splines
    • Remove the bolts from the back of the hub
    • Remove the wheel hub and bearing
  5. step : Installing the Hub Assembly (7:53)
    • Insert the wheel hub into the spindle
    • Tighten the hub bolts
    • Reinstall the axle nut
  6. step : Installing the Brake Rotor (8:58)
    • Apply grease to the hub surface
    • Put the rotor onto the hub backwards
    • Spray the rear of the hub with brake cleaner
    • Pull off the brake rotor
    • Slide the brake rotor on
    • Spray the front of the rotor with brake cleaner
    • Put the caliper bracket into place
    • Insert the two into the caliper bracket
    • Torque the two bolts
  7. step : Installing the Brake Pads (9:48)
    • Put the brake pads into the caliper bracket
    • Apply grease to the back of the brake pads
    • Push back the caliper piston with grove lock pliers
    • Put the brake caliper into place
    • Insert the two bolts into the caliper
    • Torque the two bolts
  8. step : Reattaching the Wheel (11:01)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Torque the lug nuts in a crossing or star pattern
    • Torque the axle nut

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Chisel
  • Hammer

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • Complete Metric Socket Set

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(12:07 min)

Tools List:

    General Tools

  • Large C-Clamp
  • Chisel
  • Hammer

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • Complete Metric Socket Set



This part replaces:

  • Timken 515027

Vehicle Fit

  • 1998-1999 Ford Ranger 4 Wheel Drive 4 Wheel ABS Brakes Front Wheel Bearing & Hub Assembly Timken 515027
  • 2000 Ford Ranger 4 Wheel Drive 4 Wheel ABS Brakes with Pulse Vacuum Hubs Front Wheel Bearing & Hub Assembly Timken 515027
  • 1998 Mazda B2500 Truck 4 Wheel Drive 4 Wheel ABS Brakes Front Wheel Bearing & Hub Assembly Timken 515027
  • 1999-2000 Mazda B2500 Truck 4 Wheel Drive 4 Wheel ABS Brakes with Pulse Vacuum Hubs Front Wheel Bearing & Hub Assembly Timken 515027
  • 1998 Mazda B3000 Truck 4 Wheel Drive 4 Wheel ABS Brakes Front Wheel Bearing & Hub Assembly Timken 515027
  • 1999-2000 Mazda B3000 Truck 4 Wheel Drive 4 Wheel ABS Brakes with Pulse Vacuum Hubs Front Wheel Bearing & Hub Assembly Timken 515027
  • 1998 Mazda B4000 Truck 4 Wheel Drive 4 Wheel ABS Brakes Front Wheel Bearing & Hub Assembly Timken 515027
  • 1999-2000 Mazda B4000 Truck 4 Wheel Drive 4 Wheel ABS Brakes with Pulse Vacuum Hubs Front Wheel Bearing & Hub Assembly Timken 515027
Part #: TKSHF00013

Out of Stock

Timken
Brand #: 515027

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More