Wheel Bearing Specifications:

  • Includes LH (Driver Side) & RH (Passenger Side) FRONT
  • Wheel studs already included and installed
  • Fits 5 Lug Wheel
  • 3 Bolt Triangular Mounting Flange
  • Has ABS sensor w/stainless steel & plastic wire clips
  • Direct replacement
  • Built to strict quality control standards

Steering Knuckle Specifications:

  • Includes LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 18061054, 18061055, 88955418, 88955419
  • Built to strict quality control standards

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel and tire (1:30)
    • Raise and secure the vehicle.
    • Remove the lug nuts and then the wheel.
  2. step : Remove Caliper (2:00)
    • Turn wheels all the way in the opposite direction of the side you are working on.
    • Use your 15mm socket wrench to remove the caliper bolts.
    • Use a wire tie to help prevent stress on the caliper.
  3. step : Remove brake disk (2:44)
    • Take care not to touch the disk, and if you do make sure to clean it with rubbing alcohol or mineral spirits.
  4. step : Remove Hub (2:56)
    • Remove the 3 bolts securing the hub using your 13mm socket and 3/8 extension and ratchet or breaker bar.
    • You can use penetrating oil to help.
    • Use a 35mm socket to remove the hub nut.
    • Give the axle a slight tap with a hammer to loosen it.
    • Use a rubber mallet to break it free, and work around the flange with the hammer to pull it off.
    • Leave the top 13mm loosely still in to prevent the hub from flying out if you hit it too hard.
    • Remove the hub, using driving tools to help work it out of the steering knuckle.
    • Clean up any corrosion with a wire brush.
  5. step : Install new hub (8:30)
    • Use some penetrating oil to prep the knuckle for the new hub.
    • Watch part 2 to install your new 1A Auto hub!

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands
  • Rubber Mallet

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 19mm Socket
  • 32mm Socket
  • 35mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(09:37 min)

Tools List:

    General Tools

  • Floor Jack
  • Hammer
  • Jack Stands
  • Rubber Mallet

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • 1/2 Inch Breaker Bar
  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 13mm Socket
  • 19mm Socket
  • 32mm Socket
  • 35mm Socket




Vehicle Fit

  • 2005-2008 Buick Allure Front Wheel Bearing & Hub Assembly Pair with (2) Front Steering Knuckles with ABS Brakes for Models
  • 2008 Buick Allure excluding Super Models Wheel Bearing & Hub Assembly Front Pair (2) Front Steering Knuckles with ABS Brakes for Models with
  • 2009 Buick Allure Front Wheel Bearing & Hub Assembly Pair with (2) Front Steering Knuckles excluding Super Models
  • 1997-2004 Buick Century Front Wheel Bearing & Hub Assembly Pair with (2) Front Steering Knuckles with ABS Brakes for Models
  • 2005 Buick Century Front Wheel Bearing & Hub Assembly Pair with (2) Front Steering Knuckles for Models with ABS Brakes RPO Code JB9 (Light Duty Brakes)
  • 2005-2008 Buick LaCrosse Front Wheel Bearing & Hub Assembly Pair with (2) Front Steering Knuckles with ABS Brakes for Models
  • 2009 Buick LaCrosse Front Wheel Bearing & Hub Assembly Pair with (2) Front Steering Knuckles
  • 1997-2004 Buick Regal Front Wheel Bearing & Hub Assembly Pair with (2) Front Steering Knuckles with ABS Brakes for Models
  • 2005 Buick Terraza Front Wheel Bearing & Hub Assembly Pair with (2) Front Steering Knuckles
  • 2000-2004 Chevy Impala Front Wheel Bearing & Hub Assembly Pair with (2) Front Steering Knuckles for Models with ABS Brakes RPO Code JB9 (Light Duty Brakes)
  • 2005 Chevy Impala Front Wheel Bearing & Hub Assembly Pair with (2) Front Steering Knuckles for Models with ABS Brakes RPO Code JL9 (Power 4 Wheel ABS Disc Brakes) RPO Code JB9 (Light Duty Brakes)
  • 2006-2008 Chevy Impala Front Wheel Bearing & Hub Assembly Pair with (2) Front Steering Knuckles for Models with ABS Brakes excluding Police Package
  • 2009-2013 Chevy Impala Front Wheel Bearing & Hub Assembly Pair with (2) Front Steering Knuckles
  • 2000-2004 Chevy Monte Carlo Front Wheel Bearing & Hub Assembly Pair with (2) Front Steering Knuckles for Models with ABS Brakes RPO Code JB9 (Light Duty Brakes)
  • 2005 Chevy Monte Carlo Front Wheel Bearing & Hub Assembly Pair with (2) Front Steering Knuckles for Models with ABS Brakes RPO Code JL9 (Power 4 Wheel ABS Disc Brakes) RPO Code JB9 (Light Duty Brakes)
  • 2006-2007 Chevy Monte Carlo Front Wheel Bearing & Hub Assembly Pair with (2) Front Steering Knuckles for Models with ABS Brakes RPO Code JB9 (Light Duty Brakes)
  • 2005 Chevy Uplander Front Wheel Bearing & Hub Assembly Pair with (2) Front Steering Knuckles
  • 1997-2005 Chevy Venture 2 Wheel Drive Front Wheel Bearing & Hub Assembly Pair with (2) Front Steering Knuckles for Models with ABS Brakes
  • 1998-2002 Olds Intrigue Front Wheel Bearing & Hub Assembly Pair with (2) Front Steering Knuckles with ABS Brakes for Models
  • 1997-2004 Olds Silhouette 2 Wheel Drive Front Wheel Bearing & Hub Assembly Pair with (2) Front Steering Knuckles for Models with ABS Brakes
  • 1997-2008 Pontiac Grand Prix Wheel Bearing & Hub Assembly Front Pair (2) Front Steering Knuckles with ABS Brakes for Models with
  • 1999-2001 Pontiac Montana Wheel Bearing & Hub Assembly Front Pair (2) Front Steering Knuckles with ABS Brakes for Models with
  • 2002-2005 Pontiac Montana 2 Wheel Drive Front Wheel Bearing & Hub Assembly Pair with (2) Front Steering Knuckles for Models with ABS Brakes
  • 2005 Pontiac Montana SV6 Front Wheel Bearing & Hub Assembly Pair with (2) Front Steering Knuckles
  • 1997-1998 Pontiac Trans Sport Front Wheel Bearing & Hub Assembly Pair with (2) Front Steering Knuckles with ABS Brakes for Models
  • 2005 Saturn Relay Front Wheel Bearing & Hub Assembly Pair with (2) Front Steering Knuckles
Part #: 1ASHS01060

Out of Stock

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More