Replaces

Wheel Bearing & Hub Assembly Front Pair TRQ BHA53619 - 1ASHS00540

These replacement hub & bearing assemblies are just what you need to get your vehicle in good working order again.

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 19206599
  • 3 Bolt Flanges
  • Fit 5 Lug Wheels
  • New wheel studs installed
  • Direct replacements
  • Built to strict quality control standards
Precision Engineered:

From the highest grade SAE 1055 / 65Mn high carbon steel to exact OEM design.
100% Factory tested to precise OEM tolerances.

Highest Quality Materials:

High quality, multi-lip seal reduces the intrusion of dirt and water. Heavy duty grease resists high temperature, moisture, and reduces intense friction.

Direct Fit Replacement:

Guaranteed to fit and function correctly for your specific application.

Part Details

  • Front or Rear Location: Front
  • Quantity: Pair

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

BHA54059 Axle / Spindle Nut Torque Specification

  1. step : Removing the Wheel (0:52)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Axle Nut (1:22)
    • Insert a wrench onto a spline, angled toward the inside of the vehicle
    • Thread a lug nut over the wrench
    • Rotate the hub so the wrench is pressed to the caliper
    • Remove the T30 Torx bolt
    • Lower the vehicle to the ground
    • Remove the 35mm axle nut
    • Raise the vehicle
    • Remove the wrench and lug nuts
    • Insert a flat punch into the divet in the center of the axle
    • Hammer the punch to tap the splines free
  3. step : Removing the Caliper Bracket (3:31)
    • Remove the two 18mm bolts from the caliper bracket
    • Pull the caliper off
    • Put the caliper aside
    • Remove the rotor
  4. step : Removing the Hub Assembly (4:28)
    • Clean off the hub with a wire brush and rust penetrant
    • Disconnect the ABS sensor connector
    • Remove the 15mm bolts from the back of the hub
    • Remove the wheel hub and bearing
  5. step : Installing the Hub Assembly (8:20)
    • Clean off any build up and debris from the hub surface with a wire brush
    • Insert the wheel hub into the spindle
    • Tighten the 15mm bolts
    • Torque the bolts to 96 foot-pounds
    • Reconnect the ABS sensor
  6. step : Installing the Brake Rotor (10:52)
    • Apply grease to the hub surface
    • Put the rotor onto the hub backwards
    • Spray the rear of the hub with brake cleaner
    • Pull off the brake rotor
    • Slide the brake rotor on
    • Spray the front of the rotor with brake cleaner
    • Put the caliper bracket into place
    • Insert the two 18mm bolts into the caliper bracket
    • Tighten the two 18mm bolts to 137 foot-pounds of torque
  7. step : Reinstalling the Axle Nut (11:55)
    • Insert a wrench onto a spline, angled toward the inside of the vehicle
    • Thread a lug nut over the wrench
    • Rotate the hub so the wrench is pressed to the caliper
    • Tighten the axle nut with a 35mm socket and ratchet
    • Torque the nut to 151 foot-pounds
    • Pop out the center cap on the wheel
  8. step : Reattaching the Wheel (12:41)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Center Punch
  • Hammer
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Anti-Seize Grease
  • Bungee Cord

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 35mm Socket
  • Complete Metric Socket Set

  • Torx Drivers & Sockets

  • T30 Torx Bit

  • Wrenches - Metric

  • Complete Metric Wrench Set

4.9 / 5.0
10 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
9
1
0
0
0
Wheel bearings
The shipping was great,the fit was perfect,price was great,I’ll let you know in time how they hold up. The warentty is limited lifetime so should be great
May 7, 2018
Purchased
4 months ago
easy and a great value
It was nice to see a place where I can get parts at a great value and have it delivered in a reasonable time was a relief. The local auto parts stores wanted 34 time the price for them. I will be using this site again.
April 30, 2018
Purchased
4 months ago
Wheels bearing
Fits perfectly for a good price I'm.so happy 100%%%%%
April 24, 2018
Purchased
4 months ago
Equinox hub assembly
Install was exactly as the video on 1A Auto site. Great job on communicating proper information.
April 9, 2018
Purchased
6 months ago
Chevy Wheel Bearing Hub assembly worked perfect
So far these are working perfectly and I am very happy with them. After installing myself I drove to DC and back from NJ. They were quite and smooth. Very satisfied with them and way cheaper than a brick and mortar store. Thanks again.
February 2, 2018
Purchased
7 months ago
Fast shipment, great parts
Cannot beat the price for the quality of the parts that I bought from 1aauto I will recommend them to everybody.
December 11, 2017
Purchased
8 months ago
1ASHS00540-Wheel Bearing & Hub Assembly Front Pair TRQ BHA53619
These parts were received faster than promised.
They were an exact fit and installed easily.
I am very satisfied with the service, shipment, and parts.
October 31, 2017
Purchased
10 months ago
Traction control and ABS returned to operational
Ordered these due to the mileage on the vehicle and that the traction control and abs sensors were not working heard that wheel bearing hubs are the normal culprit after watching the video of bearing hub removal and install. Fit perfect all abs and traction control display has returned to functioning. I definitely recommend this product. A few hours work and a big savings in my pocket
August 4, 2017
Purchased
1 year ago
wheel bearing hub assembly
very happy with the product so far. delivery was quicker then expected. My mechanic said they fitted like a glove, with no problems. My mechanic is going to purchase products from you because he was amazed at the price compared to other companies he was looking to purchase from. Thank You
July 7, 2017
Purchased
1 year ago
fast quick delivery
Still have one to do but the one i put on did good. Fast quick delivery and packaged good.
March 20, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 3 answers
Did it come with ball bearing grease?
Neal L on Jan 23, 2018
BEST ANSWER: the bearings are sealed and yes they have grease in them
Are the speed sensors included?
Patrick B on Jul 20, 2018
BEST ANSWER: These assemblies do come with the sensors, yes.

Vehicle Fit

Year Make Model Description
2007-2009Chevy Equinox Chevy Equinox Front Wheel Bearing & Hub Assembly Pair TRQ
2007-2009Pontiac Torrent Pontiac Torrent Front Wheel Bearing & Hub Assembly Pair TRQ
2008-2010Saturn Vue Saturn Vue Front Wheel Bearing & Hub Assembly Pair TRQ
2007-2009Suzuki XL-7 Suzuki XL-7 Wheel Bearing & Hub Assembly Front Pair TRQ

This part replaces:

  • TRQ BHA53619
Part #: 1ASHS00540


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

TRQ
Brand #: BHA53619

How-to Video:

(13:16 min)