Replaces

Wheel Bearing & Hub Assembly Front Pair TRQ BHA53464 - 1ASHS00233

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Wheel Bearing & Hub Assembly Features & Benefits:
      Direct Fit Replacement
      Precision Engineered
      Highest Quality Materials
  • Bearing Type:   Ball Bearing
  • Quantity:   Pair
  • Front or Rear Location:   Front

These replacement wheel bearing & hub assemblies are just what you need to get your vehicle in good working order again.

Specifications:

  • Comes as a PAIR
    • Fits both the LH (Driver Side) & RH (Passenger Side) FRONT
  • 4 Bolt Flanges
  • Fit 5 Lug Wheels
  • Replaces dealer part numbers: 1T0 498 621, 3C0 498 621, 8J0 598 625, 1T0498621, 3C0498621, 8J0598625
  • Wheel studs are not included
  • Direct replacements
  • Built to strict quality control standards
These wheel bearing & hub assemblies are great replacements and have good cost savings over units from the dealer.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

BHA53993 Axle / Spindle Nut Torque Specification

  1. step : Removing the Wheel (0:50)
    • Pry off the center cap with a flat blade screwdriver
    • Pry off the lug bolt covers with a pick
    • Loosen the 27mm hub bolt
    • Loosen the locking lug bolt with the key
    • Loosen the lug bolts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug bolts
    • Pull off the wheel
  2. step : Removing the Brake Pads (1:44)
    • Pry off the caliper bolt plugs by hand
    • Remove the two T47 Torx bolts from the brake caliper
    • Pry the caliper clip off with a flat blade screwdriver
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Pull the caliper aside
  3. step : Removing the Brake Rotor (2:37)
    • Remove the two 21mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Remove the T30 bolt from the rotor
    • Apply rust penetrant to the hub
    • Thread in one lug bolt
    • Strike the back of the rotor with a hammer to loosen it
    • Pull the rotor off
  4. step : Removing the Hub (3:33)
    • Remove the 27mm hub nut
    • Thread in the hub bolt half way
    • Strike the hub bolt with a hammer to loosen the axle
    • Remove the hub bolt
    • Remove the three 16mm nuts from the control arm
    • Pry down the control arm with a pry bar
    • Tap the axle out of the hub with a hammer and a socket
    • Remove the four 12-point 12mm bolts from the hub
    • Thread one 12mm bolt half way into the hub
    • Tap the hub with a hammer to loosen it
  5. step : Installing the Hub (5:20)
    • Put the hub into place
    • Insert the 12mm bolts into the hub
    • Tighten the 12mm bolts to 50 foot-pounds of torque
    • Turn each hub bolt an extra 1/4- turn
    • Push the axle into place
    • Push the control arm onto its studs
    • Fasten the three 16mm nuts onto the control arm
    • Tighten the three 16mm nuts to 50 foot-pounds
    • Thread on the hub bolt by hand
  6. step : Installing the Brake Rotor (7:06)
    • Slide the rotor on
    • Insert the T30 bolt into the rotor
    • Put the bracket back into place
    • Start the two 21mm bolts by hand
    • Tighten the 21mm bolts to 90 foot-pounds
  7. step : Installing the Brake Pads (8:01)
    • Put the brake pads into the caliper bracket if they are not already installed
    • Put the caliper on
    • Insert the two T47 bolts into the caliper
    • Tighten the T47 bolts to 30 foot-pounds
    • Push on the wire caliper bracket clip
    • Push on the caliper bolt plugs
  8. step : Reattaching the Wheel (8:44)
    • Slide the wheel into place
    • Start the lug bolts by hand
    • Tighten the lug bolts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug bolts to 100 foot-pounds in a crossing or star pattern
    • Push on the lug bolt caps
    • Tighten the hub bolts to 150 foot-pounds
    • Reattach the center cap

Tools needed for replacement:

    General Tools

  • Pick
  • Jack Stands
  • Hammer
  • Floor Jack

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Pry Bar

  • Sockets - Metric

  • 21mm Socket
  • 27mm socket
  • 16mm Socket
  • 12mm 12-Point Socket
  • 17mm Socket

4.73/ 5.0
11 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
9
1
1
0
0
Great Product
Parts work and fit exactly how they should have, no messing around or tinkering to get it to fit.
February 15, 2017
Very good great fit.
I would definitely recommend to a friend this is a high quality part for a great price I am very happy with my purchase and look forward to doing business with 1aauto in the future
May 4, 2017
Wheel bearing hub install...
1st let me congratulate you and thank you for your help with my order and how impress i am with your customer service plus super fast delivery od this parts to me !it was right fit ,easy to install and of course your video on how to install is fantastic!I will continue to buy from you guys and again tnx guys you are the best !
June 17, 2017
No wheel bearing bolts
This wheel bearing fit great, but had to spent about another $40 dollars for the axle bolts (2ea) and wheel bearing bolts (8ea). That the only reason it got three stars
August 16, 2017
Passat bearings
Installed on 08 VW Passat, so far so good. Took growls and vibrations out of front end. Product arrived in 2 days. Good price.
October 20, 2017
Passat Wheel Hub Assembly
Perfect fit and easy installation. I will buy from 1A Auto again.
March 21, 2018
Super Satisfied
In You Tube they teach how to replace the part and you save lots of money. The part looks of superb quality. Delivery is super fast. Precise fit. Fair price. They keep you informed. Buy from them.
April 11, 2018
Nice and smooth again
Been installed for about 2 weeks, and my car once again rides smooth! Granted something unrelated to the product caused me to have no power steering now after getting the car back from my friend... But she rides smooth and doesnt make noise anymore! Very happy with this package, especially at the price!
May 20, 2018
2008 Volkswagen jetta
Fast and on time delivery, got it. I would recommend this wheel hub to anyone looking for a quality and decently priced replacement part. Not to mention the quality how to video. Parts fit perfectly thank you.
July 3, 2018
Perfect
Couldnt have been any better. Fit perfectly. Solved problems. Quick shipment. Professional service
September 9, 2018
When we were faced with some unexpected car repairs and had priced the parts locally, a mechanic friend of ours suggested we try 1a Auto. My husband contacted the company that afternoon and was very pleased with the assistance and service he received. It turns out we were able to order two wheel bearings and hub assemblies, pay the exchange as well as the shipping and still pay less than a single part would cost locally. The order was shipped directly to our door even quicker than we were originally expecting. Everything worked out extremely well with our experience with 1a Auto and I know it will be the first call we make next time unexpected repairs arise.
December 1, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
do these come with the 4 mounting bolts (not the 5 wheel studs) per bearing?
Joe S October 3, 2016
I had to buy the bolts separate .
Victor A October 3, 2016
The hardware for the rear flange will not come with the hubs themselves. You can reuse your original hardware or you can purchase it from a local hardware store.
Derek C October 3, 2016
No they do not
Marcos M October 3, 2016
No the original mounting bolts are used on re install. Be sure to use the correct thread locker/ lock tight on these.
Glenn W October 4, 2016
Year Make Model Description
2006-2013Audi A3 Audi A3 Front Wheel Bearing & Hub Assembly Pair TRQ
2006-2013Audi A3 Quattro Audi A3 Quattro Front Wheel Bearing & Hub Assembly Pair TRQ
2008-2014Audi TT Audi TT Front Wheel Bearing & Hub Assembly Pair TRQ
2008-2014Audi TT Quattro Audi TT Quattro Front Wheel Bearing & Hub Assembly Pair TRQ
2012-2017Volkswagen Beetle VW Beetle Front Wheel Bearing & Hub Assembly Pair TRQ
2009-2017Volkswagen CC VW CC Front Wheel Bearing & Hub Assembly Pair TRQ
2007-2015Volkswagen Eos VW Eos Front Wheel Bearing & Hub Assembly Pair TRQ
2006-2014Volkswagen GTI VW GTI Front Wheel Bearing & Hub Assembly Pair TRQ
2011Volkswagen Golf VW Golf Front Wheel Bearing & Hub Assembly Pair (Built After 3/14/11 Production Date) TRQ
2012-2014Volkswagen Golf VW Golf Front Wheel Bearing & Hub Assembly Pair TRQ
2005-2009Volkswagen Jetta VW Jetta Front Wheel Bearing & Hub Assembly (8th Vin Digit K) Pair TRQ
2010-2017Volkswagen Jetta VW Jetta Front Wheel Bearing & Hub Assembly Pair TRQ
2006-2010Volkswagen Passat VW Passat Front Wheel Bearing & Hub Assembly Pair TRQ
2012-2017Volkswagen Passat VW Passat Front Wheel Bearing & Hub Assembly Pair TRQ
2008Volkswagen R32 VW R32 Front Wheel Bearing & Hub Assembly Pair TRQ
2006-2009Volkswagen Rabbit VW Rabbit Front Wheel Bearing & Hub Assembly Pair TRQ
2009-2017Volkswagen Tiguan VW Tiguan Front Wheel Bearing & Hub Assembly Pair TRQ
Part #: 1ASHS00233


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

TRQ
Brand #: BHA53464

How-to Video:

(10:06 min)