Replaces

Wheel Bearing & Hub Assembly Front Pair TRQ BHA53387 - 1ASHS00109

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side)
  • 3 Bolt Flanges
  • Fit 5 Lug Wheels
  • Replaces dealer part numbers: 10351823, 10359823, 21990564, 22702717
  • Direct replacements
  • Wheel studs already installed
  • Include ABS sensors with correct plugs
Precision Engineered

Precision Engineered using the highest grade SAE 1055 / 65Mn high carbon steel to exact OEM design.

100% Factory tested to precise OEM tolerances.

Highest Quality Materials

High quality, multi-lip seal reduces the intrusion of dirt and water, keeping grease clean for a longer bearing life.

Premium, heavy duty grease resists high temperature, moisture, and reduces intense friction pressure to help extend the life of the bearing.

Direct Fit Replacement

Direct fit replacement part is guaranteed to fit and function correctly for your specific application

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

BHA53960 Axle / Spindle Nut Torque Specification
  1. step : Removing the Wheel (1:00)
    • Loosen the lug nuts with the vehicle on the ground
    • Remove the cotter pin from the axle nut if it has one
    • Loosen the axle nut
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Brake Pads (3:22)
    • Remove the bolts from the caliper bracket
    • Pull the caliper off
    • Put the caliper aside
    • Pry the brake pads off with a flat blade screwdriver
  3. step : Removing the Brake Rotor (4:15)
    • Remove the two bolts from the caliper bracket
    • Pull off the brake caliper bracket
    • Remove a screw from the rotor if it has one
    • Strike the drum surface of the rotor with a hammer to loosen the rotor
    • Pull the rotor off
    • Clean the hub surface with a wire brush
  4. step : Removing the Hub Assembly (5:18)
    • Remove the axle bolt
    • Place a punch in the axle hole and hammer it to release the hub from the splines
    • Remove the bolts from the back of the hub
    • Remove the wheel hub and bearing
  5. step : Installing the Hub Assembly (7:53)
    • Insert the wheel hub into the spindle
    • Tighten the hub bolts
    • Reinstall the axle nut
  6. step : Installing the Brake Rotor (8:58)
    • Apply grease to the hub surface
    • Put the rotor onto the hub backwards
    • Spray the rear of the hub with brake cleaner
    • Pull off the brake rotor
    • Slide the brake rotor on
    • Spray the front of the rotor with brake cleaner
    • Put the caliper bracket into place
    • Insert the two into the caliper bracket
    • Torque the two bolts
  7. step : Installing the Brake Pads (9:48)
    • Put the brake pads into the caliper bracket
    • Apply grease to the back of the brake pads
    • Push back the caliper piston with grove lock pliers
    • Put the brake caliper into place
    • Insert the two bolts into the caliper
    • Torque the two bolts
  8. step : Reattaching the Wheel (11:01)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Torque the lug nuts in a crossing or star pattern
    • Torque the axle nut

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Chisel
  • Hammer

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • Complete Metric Socket Set

4.9 / 5.0
10 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
9
1
0
0
0
Perfect Fit, Perfect Price
The price was most than cost effect compared to the apparent quality of the parts...very happy here.
June 17, 2018
Purchased
3 weeks ago
Wheel bearing and hub assembly
Worked like it was suppose to.........................
June 1, 2018
Purchased
2 months ago
Two Front Wheel Bearings
These wheel bearings appear to be of good quality. I will know the full story in about two years. Yes, I would recommend them to a friend.
May 17, 2018
Purchased
1 month ago
Far better price than my local Autoparts store. So far works great.
April 5, 2018
Purchased
3 months ago
Pricing Much Better Than Local Parts Stores
Price was much better than I could obtain locally and part (wheel bearing & hub assembly) fit just like it should. Quality is same as local parts stores as virtually all bearing assemblies these days are sourced overseas.
February 26, 2018
Purchased
1 year ago
Hub assembly
Good quality easy to install and right fit
And price is really good
November 23, 2017
Purchased
7 months ago
Just installed yesterday so far so good the seem to be a good quality
July 18, 2017
Purchased
11 months ago
SO FAR SO GOOD
SEEMS TO BE O E QUALITY. ONLY TIME WILL TELL IF LASTS 150000 MILES LIKE ACTORY BEARING.
March 11, 2017
Purchased
1 year ago
Great part at an affordable price
Had no issues installing this part and it performs as expected, at a much lower price than the local part store or dealer
January 23, 2017
Purchased
1 year ago
Perfect pair
parts were the right ones, did not take long to receive them, thank you for your prompt delivery service
January 23, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 3 questions Browse 3 questions and 12 answers
How many comes for the 84.99?
Toshika M on Nov 5, 2016
BEST ANSWER: As described, there are two front bearing/hub assemblies. One for the LH and one for the RH side.
Does this fit a v 6 engine ?
Ronald on Nov 17, 2016
BEST ANSWER: yes
What make is this product?
Arturo R on Apr 9, 2016
BEST ANSWER: We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle and are covered by a 2 year warranty. If you have any further questions, please don't hesitate to ask.

Vehicle Fit

  • 2005-2006 Chevy Equinox Front Wheel Bearing & Hub Assembly with ABS Brakes Pair TRQ
  • 2006 Pontiac Torrent Front Wheel Bearing & Hub Assembly with ABS Brakes Pair TRQ
  • 2002-2007 Saturn Vue Front Wheel Bearing & Hub Assembly with ABS Brakes Pair TRQ

This part replaces:

  • OE # 10359823 x2
  • TRQ BHA53387
Part #: 1ASHS00109

TRQ
Brand #: BHA53387

How-to Video:

(12:07 min)