Replaces

Wheel Bearing & Hub Assembly Front Pair TRQ BHA53322 - 1ASHS00030

These replacement wheel bearing & hub assemblies are just what you need to get your vehicle in good working order again.

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part number: 4593450AA
  • 3 Bolt Flanges
  • Fit 5 Lug Wheels
  • Direct replacements
  • Built to strict quality control standards
These wheel bearing & hub assemblies are great replacements and have good cost savings over units from the dealer.

Quality

  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both Bizrate.com and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
  • You don't want to be delayed by a defective part. 1A Auto wheel hubs & bearings are all tested prior to shipping.

Fit Guaranteed

  • These hub & bearing sets will install just as your originals do. You can use your existing hardware.
  • Save time and money with direct fit hub bearing assemblies. No trips to the auto parts store or extra time trying to match up and press bearings.
  • Hub installation is a degree more difficult than changing a tire on most vehicles.

Value

  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.
Precision Engineered

From the highest grade SAE 1055 / 65Mn high carbon steel to exact OEM design.

100% Factory tested to precise OEM tolerances.

Highest Quality Materials

High quality, multi-lip seal reduces the intrusion of dirt and water. Heavy duty grease resists high temperature, moisture, and reduces intense friction.

Direct Fit Replacement

Guaranteed to fit and function correctly for your specific application.

Part Details

  • Front or Rear Location: Front
  • Quantity: Pair

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

BHA53905 Axle / Spindle Nut Torque Specification

  1. step : Remove the wheel (1:10)
    • Loosen the lug nuts
    • Raise and secure the vehicle
    • Remove the lug nuts and the wheel.
  2. step : Remove the brakes (1:35)
    • Turn the wheel to better access the caliper
    • Use a flat blade screwdriver to compress the caliper piston
    • Remove the two 10 mm bolts to remove the caliper.
    • Fasten the caliper up with wire ties out of the way
    • Remove the rotor, hammering it off if its rusted onto the hub.
  3. step : Remove the hub (3:10)
    • Remove the hub nut with a 34 mm socket and impact wrench.
    • If you don’t have an impact wrench, put the wheel and lug nuts back on and lower the car and use a breaker bar.
    • Unbolt the three 18 mm hub bolts.
    • Take caution not to damage the CV boot.
    • Break the hub loose with a hammer and remove it.
  4. step : Install the new hub (5:55)
    • Place the hub onto the steering knuckle and work the axle into place.
    • Bolt the three 18 mm bolts into place.
    • Torque them to 90 ft lbs, rotating so they get torqued evenly.
    • Replace the hub nut, but do not tighten all the way.
  5. step : Reassemble the brakes (8:45)
    • Put the rotor on and put a lug nut on just to keep it from running away on you while you put the caliper back on
    • Put the pads into the caliper and compress the piston with a c-clamp
    • Bolt the 10 mm caliper bolts back in
    • Put the wheel back on and hand tighten the lug nuts
    • Torque the hub nut to 105 ft lbs
    • Torque the lug nuts to 90-100 ft lbs using a star pattern.
    • Pump the brakes a few times to recompress the caliper pistons and do a few 5-10 mph stops in the driveway before road testing.

Tools needed for replacement:

    General Tools

  • Large C-Clamp
  • Large Hammer

  • Ratchets & Related

  • Ratchet
  • Socket Extensions
  • Torque Wrench

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 10mm Socket
  • 18mm Socket
  • 19mm Socket
  • 34mm Socket

  • Wrenches - Metric

  • 10mm Wrench
  • 18mm Wrench
  • 19mm Wrench

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
0
0
0
0
I would recommend this item so far. The delivery was fast and accurate. I was able to install the item without any issues and so far it works as good as I could expect. I am happy with all aspects of placing an order with 1aauto.
July 10, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1999-2004 Chrysler 300M Front Wheel Bearing & Hub Assembly Pair TRQ
  • 1993-2004 Chrysler Concorde Front Wheel Bearing & Hub Assembly Pair TRQ
  • 1994-2001 Chrysler LHS Front Wheel Bearing & Hub Assembly Pair TRQ
  • 1994-1996 Chrysler New Yorker Front Wheel Bearing & Hub Assembly Pair TRQ
  • 1993-2004 Dodge Intrepid Front Wheel Bearing & Hub Assembly Pair TRQ
  • 1993-1997 Eagle Vision Front Wheel Bearing & Hub Assembly Pair TRQ

This part replaces:

  • TRQ BHA53322
Part #: 1ASHS00030

TRQ
Brand #: BHA53322

How-to Video:

(13:19 min)