Replaces

Wheel Bearing & Hub Assembly Pair Timken SP580310 - TKSHS00304

TIMKEN WHEEL BEARING & HUB ASSEMBLIES: SP580310

These replacement hub & bearing assemblies are just what you need to get your vehicle in good working order again.

Specifications:

  • Brand New Timken Wheel Bearing & Hub Assemblies
  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 15225770, 15064670, 15946732
  • ABS sensors included
  • New wheel studs installed
  • Direct replacements
  • Built to strict quality control standards
  • Fits models with 8 lug wheels
  • Fits both 2WD & 4WD models

Quality

  • You will not have a problem with our product. If you are comparing us to someone selling a brand name product remember brand names are only as good as the company selling them. Both Bizrate.com and The Better Business Bureau recognize 1A Auto as a trusted online seller. You will be pleased with what you find out about us.
  • You don't want to be delayed by a defective part. 1A Auto wheel hubs & bearings are all tested prior to shipping.

Fit Guaranteed

  • These hub & bearing sets will install just as your originals do. You can use your existing hardware.
  • Save time and money with direct fit hub bearing assemblies. No trips to the auto parts store or extra time trying to match up and press bearings.
  • Hub installation is a degree more difficult than changing a tire on most vehicles.

Value

  • Some shops and dealers charge more for parts and repairs when they think the customer doesn't know what is involved. Now you can get the value you deserve. Knowing what this repair entails can be the difference between the value of doing it yourself, or the pain of a costly part or repair bill.

Note: These parts are authentic Timken brand products that are supplied and packaged by Timken.   In some cases, Timken will source parts from other high quality suppliers such as SKF and Koyo. These parts are subjected to the very same testing and quality standards as all Timken products.

Part Details

  • Quantity: Pair

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:52)
    • Loosen the lug nut covers with a 22mm socket
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Caliper Bracket (1:17)
    • Remove the T55 Torx bolts from the caliper
    • Use either a C-clamp to squeeze the caliper to push the caliper piston in
    • Remove the caliper
    • Pry the brake pads off with a flat blade screwdriver
    • Use a piece of pipe and ratchet to remove two 18mm bolts from the caliper bracket
    • Slide the rotor off
  3. For the third step, if you do not have air tools you can either loosen the center hub nut before you take your brakes apart by having somebody hold the brakes, or you can use a large bar, put it between the lug studs to hold it, and break the bar.

  4. step : Removing the Hub (2:58)
    • Disconnect the ABS harness from the frame and steering spindle by removing the clips
    • Pry off the center hub cap using a flat blade screw driver and hammer
    • Remove the center hub nut with an impact wrench and air blow gun
    • Remove the three 15mm hub bolts with two 15mm wrenches
    • Twist the hub nut a quarter of the way
    • And hammer from the back of the hub
    • Remove the hub nut and pull the hub out
  5. step : Installing the New Hub (5:06)
    • Place the backing plate onto the hub
    • Push the hub back into place
    • Insert and tighten the 15mm hub bolts
    • Torque the 15mm hub bolts to 75 ft/lbs
    • Remove the clip and feed the ABS harness back into place
    • Replace the clips and brackets to the ABS harness
    • Replace center hub nut and washer
    • Tighten the center hub nut
  6. step : Replacing the Caliper Bracket (6:46)
    • Place the rotor on the hub
    • Twist a lug nut to hold the rotor in place
    • Put the caliper on
    • Replace and tighten the 18mm bolts
    • Torque the 18mm bolts to 75 ft/lbs
    • Install the new brake pads into the bracket, tapping lightly with a hammer
    • Grease the caliper bolts
    • Place the caliper onto the bracket
    • Replace and tighten the T55 Torx bolts
    • Torque the bolts to 30 ft/lbs
  7. step : Reinstalling the Wheel (8:46)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the 22mm bolts
    • Tighten the lug nuts to 100 ft/lbs in a crossing or star pattern
    • Torque the center hub nut to a 125 ft/lbs
    • Reattach the center cap
  8. step : Testing the Brakes (9:33)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    Allen Wrenches

  • 5mm Allen Wrench

  • General Tools

  • Hammer
  • Jack Stands
  • Large C-Clamp

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 18mm Socket
  • 22mm Socket
  • 35mm Socket

  • Torx Drivers & Sockets

  • T55 Torx Socket

  • Wrenches - Metric

  • 15mm Wrench

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Good quality
Awsome parts really feel the difference on truck !!fit perfect on my Silverado 2500 HD
December 12, 2017
Purchased
7 months ago
2001 SILVERADO 2500 HD DURAMAX
JUST NOW GOT AROUND INSTALLING THE TWO WHEEL BEARING. TOOK US 2 HOURS. ALL WENT WELL. THE STRANGE NOISE COMING (SIMILAR NOISE WHEN APPLYING THE BREAKS ON SLIPPERY ROAD) HAS TOTALLY BEEN ELIMINATED--VERY ANNOYING. DEALER WANTED TO REPLACE ONLY THE LEFT WHEEL BEARING. BY BUYING THE TIMKEN BEARING FROM 1A AUTO I STILL SAVED $500. MY TRUCK (IN MICHIGAN) IS RUST FREE (WELL, ALMOST) HAS 260.000 MILES AND IT A VERY RELIABLE "WORK HORSE".
July 30, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2002-2006 Chevy Avalanche 2500 Front Wheel Bearing & Hub Assembly Pair Timken SP580310
  • 2001-2003 Chevy Silverado 1500 Crew Cab Front Wheel Bearing & Hub Assembly Pair Timken SP580310
  • 2004 Chevy Silverado 1500 8 Lug Wheels Front Wheel Bearing & Hub Assembly Pair Timken SP580310
  • 2007 Chevy Silverado 1500 Classic 8 Lug Wheels Front Wheel Bearing & Hub Assembly Pair Timken SP580310
  • 2001-2003 Chevy Silverado 1500 HD Crew Cab Front Wheel Bearing & Hub Assembly Pair Timken SP580310
  • 2005-2006 Chevy Silverado 1500 HD Front Wheel Bearing & Hub Assembly Pair Timken SP580310
  • 2007 Chevy Silverado 1500 HD Classic Front Wheel Bearing & Hub Assembly Pair Timken SP580310
  • 1999-2004 Chevy Silverado 2500 Front Wheel Bearing & Hub Assembly Pair Timken SP580310
  • 2001-2006 Chevy Silverado 2500 HD Front Wheel Bearing & Hub Assembly Pair Timken SP580310
  • 2007 Chevy Silverado 2500 HD Classic Front Wheel Bearing & Hub Assembly Pair Timken SP580310
  • 2004-2006 Chevy Silverado 3500 RPO Code JH6 (Hyd Power 4 Wheel Disc Brakes, 9900lb) with Single Rear Wheels (SRW) Front Wheel Bearing & Hub Assembly Pair Timken SP580310
  • 2007 Chevy Silverado 3500 Classic RPO Code JH6 (Hyd Power 4 Wheel Disc Brakes, 9900lb) with Single Rear Wheels (SRW) Front Wheel Bearing & Hub Assembly Pair Timken SP580310
  • 2000-2006 Chevy Suburban 2500 Front Wheel Bearing & Hub Assembly Pair Timken SP580310
  • 2001-2003 GMC Sierra 1500 Crew Cab Front Wheel Bearing & Hub Assembly Pair Timken SP580310
  • 2004 GMC Sierra 1500 8 Lug Wheels Front Wheel Bearing & Hub Assembly Pair Timken SP580310
  • 2001-2003 GMC Sierra 1500 HD Crew Cab Front Wheel Bearing & Hub Assembly Pair Timken SP580310
  • 2005-2006 GMC Sierra 1500 HD Front Wheel Bearing & Hub Assembly Pair Timken SP580310
  • 2007 GMC Sierra 1500 HD Classic Front Wheel Bearing & Hub Assembly Pair Timken SP580310
  • 1999-2004 GMC Sierra 2500 Front Wheel Bearing & Hub Assembly Pair Timken SP580310
  • 2001-2006 GMC Sierra 2500 HD Front Wheel Bearing & Hub Assembly Pair Timken SP580310
  • 2007 GMC Sierra 2500 HD Classic Front Wheel Bearing & Hub Assembly Pair Timken SP580310
  • 2004-2006 GMC Sierra 3500 RPO Code JH6 (Hyd Power 4 Wheel Disc Brakes, 9900lb) with Single Rear Wheels (SRW) Front Wheel Bearing & Hub Assembly Pair Timken SP580310
  • 2007 GMC Sierra 3500 Classic RPO Code JH6 (Hyd Power 4 Wheel Disc Brakes, 9900lb) with Single Rear Wheels (SRW) Front Wheel Bearing & Hub Assembly Pair Timken SP580310
  • 2000-2006 GMC Yukon XL 2500 Front Wheel Bearing & Hub Assembly Pair Timken SP580310
  • 2003-2007 Hummer H2 Front Wheel Bearing & Hub Assembly Pair Timken SP580310

This part replaces:

  • Timken SP580310
Only 2 left in stock
Part #: TKSHS00304

Timken
Brand #: SP580310

How-to Video:

(10:03 min)