Wheel Bearing & Hub Assembly Front Pair Timken HA590600K - TKSHS00496


These replacement hub & bearing assemblies are just what you need to get your vehicle in good working order again.


  • Brand New Timken Wheel Bearing & Hub Assemblies
  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part numbers: 40210-3Z000, 40202-2Y010, 402103Z000, 402022Y010
  • Fit 5 Lug Wheels
  • Studs already installed
  • Direct replacements
  • Built to strict quality control standards

Note: These parts are authentic Timken brand products that are supplied and packaged by Timken.   In some cases, Timken will source parts from other high quality suppliers such as SKF and Koyo. These parts are subjected to the very same testing and quality standards as all Timken products.

Part Details

  • Front or Rear Location: Front
  • Quantity: Pair

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
High Quality Parts
My father has been an professional mechanic for 40+ years, and suggested that if I had a chance to purchase Timken bearings for my upcoming job on my Nissan that they would be worth it. The replacement wasn't complicated, but isn't fast either. I had the use of a hydraulic press to remove the old bearings and install these new ones. I also purchased and replaced outer tie rods at the same time, because it is easy to chew up one of their rubber boots when disassembling.
March 23, 2016
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 2 answers
Are the bearings already pressed in?
Jonathan C on Jun 8, 2016
BEST ANSWER: No. You will need to press the bearings into the steering knuckle, and then press the hubs into that.
I did this very repair on my Maxima about 4 months ago. I have a press ( $150 from Harbor Freight ) and it made this repair pretty easy. While it may be possible using heat/cold to get the new hubs on the bearings, you will definitely need a tool to get the old bearing out of the steering knuckle.
Good Luck!

Vehicle Fit

Year Make Model Description
2000-2001Infiniti I30 Infiniti I30 Front Wheel Bearing & Hub Assembly Pair Timken HA590600K
2002-2004Infiniti I35 Infiniti I35 Front Wheel Bearing & Hub Assembly Pair Timken HA590600K
2002-2006Nissan Altima Nissan Altima Front Wheel Bearing & Hub Assembly V6 3.5L Pair Timken HA590600K
2000-2008Nissan Maxima Nissan Maxima Front Wheel Bearing & Hub Assembly Pair Timken HA590600K
2005-2006Nissan X-Trail Nissan X-Trail Front Wheel Bearing & Hub Assembly Pair Timken HA590600K

This part replaces:

  • Timken HA590600K
Only 3 left in stock
Part #: TKSHS00496

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Brand #: HA590600K