Replaces

Wheel Bearing & Hub Assembly Front Pair Timken HA590070 - TKSHS00404

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   Pair
  • Front or Rear Location:   Front

TIMKEN WHEEL BEARING & HUB ASSEMBLIES: HA590070

These replacement hub & bearing assemblies are just what you need to get your vehicle in good working order again.

Specifications:

  • Brand New Timken Wheel Bearing & Hub Assemblies
  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT
  • Replaces dealer part number: 15793213
  • Fit 5 Lug Wheels
  • Direct replacements
  • Built to strict quality control standards

Note:
These parts are authentic Timken brand products that are supplied and packaged by Timken.   In some cases, Timken will source parts from other high quality suppliers such as SKF and Koyo. These parts are subjected to the very same testing and quality standards as all Timken products.

Item Condition: New

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:54)
    • Use a 19mm socket to remove the plastic covers.
    • Remove the wheel cover.
    • Loosen the all the lug nuts while wheel is on the ground.
    • Once the car is jacked up remove all the lug nuts and pull the wheel free.
  2. step : Removing the Brakes (1:37)
    • Remove the two 14mm bolts on the back of the caliper
    • Place a screwdriver into the whole on the caliper and pry the pads out.
    • Remove the caliper and pads.
    • Remove the two 15mm bolts on the caliper bracket.
    • Pull the bracket free.
    • Pull rotor off.
    • Pull the tab on the ABS harness and pull the harness free.
  3. step : Removing the Rotor and Hub (4:01)
    • Hit the axel with a hammer. If it moves you are all set. If it doesn't you need an axel puller.
    • Remove the three screws on the back of the hub. Use a pipe for extra leverage.
    • Hammer the hub from side to side, up and down, until it loosens and can be pulled free.
    • Remove the hub and backing plate.
    • Use a wire brush to clean the bracket.
    • Spray with penetrating oil.
  4. step : Replacing the Hub Assembly (7:09)
    • Replace the backing plate.
    • Run the connecter up and through.
    • Line up the hub and push into place. Put the bolts through.
    • Reconnect the ABS.
    • Tighten the three hub bolts to 65ft/lbs.
    • Slide on the rotor. And replace one nut to secure it.
    • Replace the caliper bracket and bolts. Tighten to 85ft/lbs.
    • Put the brake pads into place.
    • Replace the caliper and the two bolts to secure it. Tighten to 35ft/lbs.
    • Remove the nut from the rotor.
  5. step : Replacing the Wheel (11:11)
    • Put the wheel into place.
    • Replace the lug nuts.
    • Lower the vehicle.
    • Tighten the lug nuts in a star pattern to 100ft/lbs.
    • Tighten the center lug nut to 159ft/lbs.
    • Replace the wheel cover.
    • Use a socket to replace the retainers.
    • Pump your brakes until they are firm.

Tools needed for replacement:

    General Tools

  • Wire Brush
  • Jack Stands
  • Hammer

  • Ratchets & Related

  • Ratchet
  • Socket Extensions
  • 1/2 Inch Breaker Bar
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 15mm Socket
  • 14mm Socket
  • 19mm Socket
  • 13mm Socket
  • 35mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2008-2010Chevy Cobalt Chevy Cobalt SS Front Wheel Bearing & Hub Assembly Pair with 5 Lug Wheels Timken HA590070
2008-2010Chevy HHR Chevy HHR SS Front Wheel Bearing & Hub Assembly Rear Disc Brakes Pair Timken HA590070
2004-2005Chevy Malibu Chevy Malibu Front Wheel Bearing & Hub Assembly New Body Style with with ABS Brakes (4th Vin Digit Z) Pair Timken HA590070
2006-2007Chevy Malibu Chevy Malibu Front Wheel Bearing & Hub Assembly for Models with ABS Brakes Pair Timken HA590070
2008-2012Chevy Malibu Chevy Malibu Front Wheel Bearing & Hub Assembly Pair Timken HA590070
2004-2007Chevy Malibu Maxx Chevy Malibu Maxx Front Wheel Bearing & Hub Assembly Pair Timken HA590070
2005-2007Pontiac G6 Pontiac G6 Front Wheel Bearing & Hub Assembly for Models with ABS Brakes Pair Timken HA590070
2008-2010Pontiac G6 Pontiac G6 Front Wheel Bearing & Hub Assembly Pair Timken HA590070
2007-2009Saturn Aura Saturn Aura Front Wheel Bearing & Hub Assembly Pair Timken HA590070
Only 1 left in stock
Part #: TKSHS00404


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Timken
Brand #: HA590070

How-to Video:

(12:29 min)